Can't dial out with Google Voice account

FreePBX Installation / Upgrade
#1

Hi all. Not sure whether this is the right place to post this request for help but I’m a noob on this freepbx and have no idea where to go about next. After following through all the setup for freepbx and googlevoice, I was able to receive the call but the outbound is a different issue.
This is the message I got.

“your call cannot be completed as dialed. please check your number”

I’m guessing it’s something to do with my setup in the outbound but I’m not quite sure. Here is my setup info.

CentOS 6.4 64 Bit.
Freepbx 2.11.0.10
I use the shell script distro installation updated the dahdi manually.
Outbound setup for dial pattern:
+1NXXNXXXXXX
1NXXNXXXXXX
NXXNXXXXXX

Here is the log file that I scrubbed already: Assumed the 206-555-1212 is my real number I tried to dial. I’m not quite sure where to start the debugging process. Please help? Many thanks in advance…

[2013-09-03 17:32:30] VERBOSE[13265][C-0000000a] netsock2.c: == Using SIP RTP TOS bits 184
[2013-09-03 17:32:30] VERBOSE[13265][C-0000000a] netsock2.c: == Using SIP RTP CoS mark 5
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:1] Macro(“SIP/8001-00000006”, “user-callerid,LIMIT,”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:1] Set(“SIP/8001-00000006”, “TOUCH_MONITOR=1378254750.6”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:2] Set(“SIP/8001-00000006”, “AMPUSER=8001”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/8001-00000006”, “0?report”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:4] ExecIf(“SIP/8001-00000006”, “1?Set(REALCALLERIDNUM=8001)”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:5] Set(“SIP/8001-00000006”, “AMPUSER=8001”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:6] Set(“SIP/8001-00000006”, “AMPUSERCIDNAME=Le Dude’s”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:7] GotoIf(“SIP/8001-00000006”, “0?report”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:8] Set(“SIP/8001-00000006”, “AMPUSERCID=8001”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:9] Set(“SIP/8001-00000006”, “__DIAL_OPTIONS=Ttr”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:10] Set(“SIP/8001-00000006”, "CALLERID(all)=“Le Dude’s” ") in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:11] GotoIf(“SIP/8001-00000006”, “0?limit”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:12] ExecIf(“SIP/8001-00000006”, “1?Set(GROUP(concurrency_limit)=8001)”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:13] ExecIf(“SIP/8001-00000006”, “0?Set(CHANNEL(language)=)”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:14] GosubIf(“SIP/8001-00000006”, “7?sub-ccss,s,1(from-internal,12065551212)”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/8001-00000006”, “0?Return()”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:2] Set(“SIP/8001-00000006”, “CCSS_SETUP=TRUE”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:3] GosubIf(“SIP/8001-00000006”, “0?monitor_config,1(from-internal,12065551212):monitor_default,1(from-internal,12065551212)”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/8001-00000006”, “0?is_exten”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:2] StackPop(“SIP/8001-00000006”, “”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:3] Return(“SIP/8001-00000006”, “FALSE”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:15] GotoIf(“SIP/8001-00000006”, “1?continue”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Goto (macro-user-callerid,s,28)
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:28] Set(“SIP/8001-00000006”, “CALLERID(number)=8001”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:29] Set(“SIP/8001-00000006”, “CALLERID(name)=Le Dude’s”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:30] Set(“SIP/8001-00000006”, “CDR(cnum)=8001”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:31] Set(“SIP/8001-00000006”, “CDR(cnam)=Le Dude’s”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:32] Set(“SIP/8001-00000006”, “CHANNEL(language)=en”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:2] NoCDR(“SIP/8001-00000006”, “”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:3] Progress(“SIP/8001-00000006”, “”) in new stack
[2013-09-03 17:32:30] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:4] Wait(“SIP/8001-00000006”, “1”) in new stack
[2013-09-03 17:32:31] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:5] Progress(“SIP/8001-00000006”, “”) in new stack
[2013-09-03 17:32:31] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:6] Playback(“SIP/8001-00000006”, “silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer”) in new stack
[2013-09-03 17:32:31] VERBOSE[15495][C-0000000a] file.c: – <SIP/8001-00000006> Playing ‘silence/1.ulaw’ (language ‘en’)
[2013-09-03 17:32:32] VERBOSE[15495][C-0000000a] file.c: – <SIP/8001-00000006> Playing ‘cannot-complete-as-dialed.ulaw’ (language ‘en’)
[2013-09-03 17:32:34] VERBOSE[15495][C-0000000a] file.c: – <SIP/8001-00000006> Playing ‘check-number-dial-again.ulaw’ (language ‘en’)
[2013-09-03 17:32:36] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:7] Wait(“SIP/8001-00000006”, “1”) in new stack
[2013-09-03 17:32:37] VERBOSE[15495][C-0000000a] pbx.c: == Spawn extension (from-internal, 12065551212, 7) exited non-zero on ‘SIP/8001-00000006’
[2013-09-03 17:32:37] VERBOSE[15495][C-0000000a] pbx.c: – Executing [[email protected]:1] Hangup(“SIP/8001-00000006”, “”) in new stack

[2013-09-03 17:32:37] VERBOSE[15495][C-0000000a] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/8001-00000006’

#2

In your outbound route setup you need to select a set of working trunks that accept your dialed number as legitimate with a callerID that is also legitimate to that technology.

You mention dahdi and googlevoice, but do not describe how you set them up.

So, Are your outbound trunks working? becdause it does not look like you have selected a functional trunk to carry the call.

#3

Thanks Dicko.

I did setup the outbound routes and trunk.

outbound trunk setup:
Trunk name: GVM_GvoiceNumber
Outbound CallerID: GVoiceNumber
CID Options: Allow Any CID
Asterisk Trunk Dial Options: r with overide checked
Custom Dial String:
Motif/mygvoiceaccgmailcom/[email protected]

Outbound routes setup is as follow:

I have the route CID: my GVoiceNumber with overide extension checked.

I added the dial patterns
+1NXXNXXXXXX
1NXXNXXXXXX
NXXNXXXXXX

and I selected the Google voice GVM_GvoiceNumber as the trunk sequence.

I follow this instruction to do it.

I didn’t configure dahdi. I just installed it so that it won’t give me the strings of error everytime I restarted the asterisk.

Did I miss anything else? To be honest, I don’t even know whether my outbound trunks work. but it’s setup.

#4

Add a phone to the mix if you have not already, there are free SIP sofphones for every OS out there, Then investigate if you can call out, if you

tailf /var/log/asterisk/full

as you make or take a call, it will be diagnostic.

#5

I’m using Blink for the SIP client. I can receive google voice call but can’t call out. Here is what I found in tailf /var/log/asterisk/full. Not sure what it means though… Thanks for the fast response dicko. :slight_smile:

[2013-09-03 22:10:09] VERBOSE[18014][C-00000000] netsock2.c: == Using SIP RTP TOS bits 184
[2013-09-03 22:10:09] VERBOSE[18014][C-00000000] netsock2.c: == Using SIP RTP CoS mark 5
[2013-09-03 22:10:09] DEBUG[18014][C-00000000] sip/sdp_crypto.c: Accepting crypto tag 1
[2013-09-03 22:10:09] DEBUG[18014][C-00000000] sip/sdp_crypto.c: Crypto line: a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:FNMNsb5J7Sten5USCmZFz/TNdP3IZDHqDN2Qi610
[2013-09-03 22:10:09] WARNING[18014][C-00000000] chan_sip.c: We are requesting SRTP for audio, but they responded without it!

#6

Those are the line for outgoing.

Here is the line for incoming: 12061234567 is the number I dial from. 2065551212 is my googlevoice number (destination)

[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] NoOp(“Motif/+12061234567-53f7”, “Receiving GoogleVoice on DID: 2065551212”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:2] NoOp(“Motif/+12061234567-53f7”, “s”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:3] Set(“Motif/+12061234567-53f7”, “CALLERID(name)=+12061234567”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:4] GotoIf(“Motif/+12061234567-53f7”, “0?nextstop”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:5] Set(“Motif/+12061234567-53f7”, “CALLERID(name)=2064860898”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:6] GotoIf(“Motif/+12061234567-53f7”, “1?notrim”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (im-thehuangs01gmailcom,s,8)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:8] Set(“Motif/+12061234567-53f7”, “CALLERID(number)=2064860898”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:9] Set(“Motif/+12061234567-53f7”, “DIAL_OPTIONS=TtraD(:1)”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:10] Goto(“Motif/+12061234567-53f7”, “from-trunk,2065551212,1”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (from-trunk,2065551212,1)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] Set(“Motif/+12061234567-53f7”, “__FROM_DID=2065551212”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:2] Gosub(“Motif/+12061234567-53f7”, “app-blacklist-check,s,1()”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] GotoIf(“Motif/+12061234567-53f7”, “0?blacklisted”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:2] Set(“Motif/+12061234567-53f7”, “CALLED_BLACKLIST=1”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:3] Return(“Motif/+12061234567-53f7”, “”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:3] Set(“Motif/+12061234567-53f7”, “CDR(did)=2065551212”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:4] ExecIf(“Motif/+12061234567-53f7”, “0 ?Set(CALLERID(name)=2064860898)”) in new stack
[2013-09-03 22:13:48] WARNING[18040][C-00000001] func_callerid.c: CALLERPRES is deprecated. Use CALLERID(name-pres) or CALLERID(num-pres) instead.
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:5] Set(“Motif/+12061234567-53f7”, “__CALLINGPRES_SV=allowed_not_screened”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:6] Set(“Motif/+12061234567-53f7”, “CALLERPRES()=allowed_not_screened”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:7] Goto(“Motif/+12061234567-53f7”, “from-did-direct,8001,1”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (from-did-direct,8001,1)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] Set(“Motif/+12061234567-53f7”, “__RINGTIMER=15”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:2] Macro(“Motif/+12061234567-53f7”, “exten-vm,novm,8001,0,0,0”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] Macro(“Motif/+12061234567-53f7”, “user-callerid,”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] Set(“Motif/+12061234567-53f7”, “TOUCH_MONITOR=1378271628.0”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:2] Set(“Motif/+12061234567-53f7”, “AMPUSER=2064860898”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:3] GotoIf(“Motif/+12061234567-53f7”, “0?report”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:4] ExecIf(“Motif/+12061234567-53f7”, “1?Set(REALCALLERIDNUM=2064860898)”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:5] Set(“Motif/+12061234567-53f7”, “AMPUSER=”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:6] Set(“Motif/+12061234567-53f7”, “AMPUSERCIDNAME=”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:7] GotoIf(“Motif/+12061234567-53f7”, “1?report”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (macro-user-callerid,s,15)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:15] GotoIf(“Motif/+12061234567-53f7”, “0?continue”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:16] Set(“Motif/+12061234567-53f7”, “__TTL=64”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:17] GotoIf(“Motif/+12061234567-53f7”, “1?continue”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (macro-user-callerid,s,28)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:28] Set(“Motif/+12061234567-53f7”, “CALLERID(number)=2064860898”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:29] Set(“Motif/+12061234567-53f7”, “CALLERID(name)=2064860898”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:30] Set(“Motif/+12061234567-53f7”, “CDR(cnum)=2064860898”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:31] Set(“Motif/+12061234567-53f7”, “CDR(cnam)=2064860898”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:32] Set(“Motif/+12061234567-53f7”, “CHANNEL(language)=en”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:2] Set(“Motif/+12061234567-53f7”, “RingGroupMethod=none”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:3] Set(“Motif/+12061234567-53f7”, “__EXTTOCALL=8001”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:4] Set(“Motif/+12061234567-53f7”, “__PICKUPMARK=8001”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:5] Set(“Motif/+12061234567-53f7”, “RT=”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:6] Gosub(“Motif/+12061234567-53f7”, “sub-record-check,s,1(exten,8001,)”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] Set(“Motif/+12061234567-53f7”, “REC_POLICY_MODE_SAVE=”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:2] GotoIf(“Motif/+12061234567-53f7”, “1?check”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (sub-record-check,s,7)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:7] Set(“Motif/+12061234567-53f7”, “__MON_FMT=wav”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:8] GotoIf(“Motif/+12061234567-53f7”, “1?next”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (sub-record-check,s,11)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:11] ExecIf(“Motif/+12061234567-53f7”, “0?Return()”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:12] ExecIf(“Motif/+12061234567-53f7”, “0?Set(__REC_POLICY_MODE=)”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:13] GotoIf(“Motif/+12061234567-53f7”, “0?exten,1”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:14] Set(“Motif/+12061234567-53f7”, “__REC_STATUS=INITIALIZED”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:15] Set(“Motif/+12061234567-53f7”, “NOW=1378271628”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:16] Set(“Motif/+12061234567-53f7”, “__DAY=03”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:17] Set(“Motif/+12061234567-53f7”, “__MONTH=09”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:18] Set(“Motif/+12061234567-53f7”, “__YEAR=2013”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:19] Set(“Motif/+12061234567-53f7”, “__TIMESTR=20130903-221348”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:20] Set(“Motif/+12061234567-53f7”, “__FROMEXTEN=2064860898”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:21] Set(“Motif/+12061234567-53f7”, “__CALLFILENAME=exten-8001-2064860898-20130903-221348-1378271628.0”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:22] Goto(“Motif/+12061234567-53f7”, “exten,1”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (sub-record-check,exten,1)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] GotoIf(“Motif/+12061234567-53f7”, “0?callee”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]b-record-check:2] Set(“Motif/+12061234567-53f7”, “__REC_POLICY_MODE=dontcare”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:3] GotoIf(“Motif/+12061234567-53f7”, “1?caller”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (sub-record-check,exten,10)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:10] Set(“Motif/+12061234567-53f7”, “__REC_POLICY_MODE=”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:11] GosubIf(“Motif/+12061234567-53f7”, “0?record,1(exten,8001,2064860898)”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:12] Return(“Motif/+12061234567-53f7”, “”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:7] GotoIf(“Motif/+12061234567-53f7”, “1?macrodial”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (macro-exten-vm,s,13)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:13] GosubIf(“Motif/+12061234567-53f7”, “0?clrheader,1()”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:14] Macro(“Motif/+12061234567-53f7”, “dial-one,TtraD(:1),8001”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] Set(“Motif/+12061234567-53f7”, “DEXTEN=8001”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:2] Set(“Motif/+12061234567-53f7”, “DIALSTATUS_CW=”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:3] GosubIf(“Motif/+12061234567-53f7”, “0?screen,1()”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:4] GosubIf(“Motif/+12061234567-53f7”, “0?cf,1()”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:5] GotoIf(“Motif/+12061234567-53f7”, “1?skip1”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (macro-dial-one,s,8)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:8] GotoIf(“Motif/+12061234567-53f7”, “0?nodial”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:9] GotoIf(“Motif/+12061234567-53f7”, “0?continue”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:10] Set(“Motif/+12061234567-53f7”, “EXTHASCW=ENABLED”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:11] GotoIf(“Motif/+12061234567-53f7”, “0?next1:cwinusebusy”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (macro-dial-one,s,23)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:23] GotoIf(“Motif/+12061234567-53f7”, “1?next3:continue”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (macro-dial-one,s,24)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:24] ExecIf(“Motif/+12061234567-53f7”, “0?Set(DIALSTATUS_CW=BUSY)”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:25] GotoIf(“Motif/+12061234567-53f7”, “0?nodial”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:26] GosubIf(“Motif/+12061234567-53f7”, “1?dstring,1():dlocal,1()”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] Set(“Motif/+12061234567-53f7”, “DSTRING=”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:2] Set(“Motif/+12061234567-53f7”, “DEVICES=8001”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:3] ExecIf(“Motif/+12061234567-53f7”, “0?Return()”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:4] ExecIf(“Motif/+12061234567-53f7”, “0?Set(DEVICES=001)”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:5] Set(“Motif/+12061234567-53f7”, “LOOPCNT=1”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:6] Set(“Motif/+12061234567-53f7”, “ITER=1”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:7] Set(“Motif/+12061234567-53f7”, “THISDIAL=SIP/8001”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:8] GosubIf(“Motif/+12061234567-53f7”, “1?zap2dahdi,1()”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] ExecIf(“Motif/+12061234567-53f7”, “0?Return()”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:2] Set(“Motif/+12061234567-53f7”, “NEWDIAL=”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:3] Set(“Motif/+12061234567-53f7”, “LOOPCNT2=1”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:4] Set(“Motif/+12061234567-53f7”, “ITER2=1”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:5] Set(“Motif/+12061234567-53f7”, “THISPART2=SIP/8001”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:6] ExecIf(“Motif/+12061234567-53f7”, “0?Set(THISPART2=DAHDI/8001)”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:7] Set(“Motif/+12061234567-53f7”, “NEWDIAL=SIP/8001&”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:8] Set(“Motif/+12061234567-53f7”, “ITER2=2”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:9] GotoIf(“Motif/+12061234567-53f7”, “0?begin2”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:10] Set(“Motif/+12061234567-53f7”, “THISDIAL=SIP/8001”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:11] Return(“Motif/+12061234567-53f7”, “”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:9] Set(“Motif/+12061234567-53f7”, “DSTRING=SIP/8001&”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:10] Set(“Motif/+12061234567-53f7”, “ITER=2”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:11] GotoIf(“Motif/+12061234567-53f7”, “0?begin”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:12] Set(“Motif/+12061234567-53f7”, “DSTRING=SIP/8001”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:13] Return(“Motif/+12061234567-53f7”, “”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:27] GotoIf(“Motif/+12061234567-53f7”, “0?nodial”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:28] GotoIf(“Motif/+12061234567-53f7”, “0?skiptrace”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:29] GosubIf(“Motif/+12061234567-53f7”, “1?ctset,1():ctclear,1()”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] Set(“Motif/+12061234567-53f7”, “DB(CALLTRACE/8001)=2064860898”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:2] Return(“Motif/+12061234567-53f7”, “”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:30] Set(“Motif/+12061234567-53f7”, “D_OPTIONS=TtraD(:1)”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:31] ExecIf(“Motif/+12061234567-53f7”, “0?SIPAddHeader(Alert-Info: )”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:32] ExecIf(“Motif/+12061234567-53f7”, “0?SIPAddHeader()”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:33] ExecIf(“Motif/+12061234567-53f7”, “0?Set(CHANNEL(musicclass)=)”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:34] GosubIf(“Motif/+12061234567-53f7”, “0?qwait,1()”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:35] Set(“Motif/+12061234567-53f7”, “__CWIGNORE=”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:36] Set(“Motif/+12061234567-53f7”, “__KEEPCID=TRUE”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:37] GotoIf(“Motif/+12061234567-53f7”, “0?usegoto,1”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:38] GotoIf(“Motif/+12061234567-53f7”, “1?godial”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Goto (macro-dial-one,s,42)
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:42] Dial(“Motif/+12061234567-53f7”, “SIP/8001,TtraD(:1)”) in new stack
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] netsock2.c: == Using SIP RTP TOS bits 184
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] netsock2.c: == Using SIP RTP CoS mark 5
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] app_dial.c: – Called SIP/8001
[2013-09-03 22:13:48] VERBOSE[18040][C-00000001] app_dial.c: – SIP/8001-00000000 is ringing
[2013-09-03 22:13:52] VERBOSE[18040][C-00000001] app_dial.c: – SIP/8001-00000000 answered Motif/+12061234567-53f7
[2013-09-03 22:13:52] VERBOSE[18040][C-00000001] app_dial.c: – Sending DTMF ‘1’ to the calling party.
[2013-09-03 22:13:57] VERBOSE[18040][C-00000001] res_musiconhold.c: – Started music on hold, class ‘default’, on Motif/+12061234567-53f7
[2013-09-03 22:14:05] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] Macro(“Motif/+12061234567-53f7”, “hangupcall,”) in new stack
[2013-09-03 22:14:05] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:1] GotoIf(“Motif/+12061234567-53f7”, “1?theend”) in new stack
[2013-09-03 22:14:05] VERBOSE[18040][C-00000001] pbx.c: – Goto (macro-hangupcall,s,3)
[2013-09-03 22:14:05] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:3] ExecIf(“Motif/+12061234567-53f7”, “0?Set(CDR(recordingfile)=)”) in new stack
[2013-09-03 22:14:05] VERBOSE[18040][C-00000001] pbx.c: – Executing [[email protected]:4] Hangup(“Motif/+12061234567-53f7”, “”) in new stack
[2013-09-03 22:14:05] VERBOSE[18040][C-00000001] app_macro.c: == Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘Motif/+12061234567-53f7’ in macro ‘hangupcall’
[2013-09-03 22:14:05] VERBOSE[18040][C-00000001] pbx.c: == Spawn extension (macro-dial-one, h, 1) exited non-zero on ‘Motif/+12061234567-53f7’
[2013-09-03 22:14:05] VERBOSE[18040][C-00000001] app_macro.c: == Spawn extension (macro-dial-one, s, 42) exited non-zero on ‘Motif/+12061234567-53f7’ in macro ‘dial-one’
[2013-09-03 22:14:05] VERBOSE[18040][C-00000001] app_macro.c: == Spawn extension (macro-exten-vm, s, 14) exited non-zero on ‘Motif/+12061234567-53f7’ in macro ‘exten-vm’
[2013-09-03 22:14:05] VERBOSE[18040][C-00000001] pbx.c: == Spawn extension (from-did-direct, 8001, 2) exited non-zero on ‘Motif/+12061234567-53f7’
[2013-09-03 22:14:05] VERBOSE[18040][C-00000001] res_musiconhold.c: – Stopped music on hold on Motif/+12061234567-53f7

#7

Googling around the problem I’m guessing the problem is because of the Secure RTP. Now the question is where or how do I disable Secure RTP on Freepbx. I disable the Secure RTP on my Softphone and now I got a different error message.

“Your Call can’t be completed as dial. Please try again.”

Here is the log: Gosh, I’m running out of hair to pull… :slight_smile:

[2013-09-03 22:34:10] VERBOSE[18014][C-00000005] netsock2.c: == Using SIP RTP TOS bits 184
[2013-09-03 22:34:10] VERBOSE[18014][C-00000005] netsock2.c: == Using SIP RTP CoS mark 5
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:1] Macro(“SIP/8001-00000003”, “user-callerid,LIMIT,”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:1] Set(“SIP/8001-00000003”, “TOUCH_MONITOR=1378272850.4”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:2] Set(“SIP/8001-00000003”, “AMPUSER=8001”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:3] GotoIf(“SIP/8001-00000003”, “0?report”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:4] ExecIf(“SIP/8001-00000003”, “1?Set(REALCALLERIDNUM=8001)”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:5] Set(“SIP/8001-00000003”, “AMPUSER=8001”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:6] Set(“SIP/8001-00000003”, “AMPUSERCIDNAME=Le Dude’s”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:7] GotoIf(“SIP/8001-00000003”, “0?report”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:8] Set(“SIP/8001-00000003”, “AMPUSERCID=8001”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:9] Set(“SIP/8001-00000003”, “__DIAL_OPTIONS=Ttr”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:10] Set(“SIP/8001-00000003”, "CALLERID(all)=“Le Dude’s” ") in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:11] GotoIf(“SIP/8001-00000003”, “0?limit”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:12] ExecIf(“SIP/8001-00000003”, “1?Set(GROUP(concurrency_limit)=8001)”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:13] ExecIf(“SIP/8001-00000003”, “0?Set(CHANNEL(language)=)”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:14] GosubIf(“SIP/8001-00000003”, “7?sub-ccss,s,1(from-internal,12061234567)”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:1] ExecIf(“SIP/8001-00000003”, “0?Return()”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:2] Set(“SIP/8001-00000003”, “CCSS_SETUP=TRUE”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:3] GosubIf(“SIP/8001-00000003”, “0?monitor_config,1(from-internal,12061234567):monitor_default,1(from-internal,12061234567)”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:1] GotoIf(“SIP/8001-00000003”, “0?is_exten”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:2] StackPop(“SIP/8001-00000003”, “”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:3] Return(“SIP/8001-00000003”, “FALSE”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:15] GotoIf(“SIP/8001-00000003”, “1?continue”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Goto (macro-user-callerid,s,28)
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:28] Set(“SIP/8001-00000003”, “CALLERID(number)=8001”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:29] Set(“SIP/8001-00000003”, “CALLERID(name)=Le Dude’s”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:30] Set(“SIP/8001-00000003”, “CDR(cnum)=8001”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:31] Set(“SIP/8001-00000003”, “CDR(cnam)=Le Dude’s”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:32] Set(“SIP/8001-00000003”, “CHANNEL(language)=en”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:2] NoCDR(“SIP/8001-00000003”, “”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:3] Progress(“SIP/8001-00000003”, “”) in new stack
[2013-09-03 22:34:10] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:4] Wait(“SIP/8001-00000003”, “1”) in new stack
[2013-09-03 22:34:11] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:5] Progress(“SIP/8001-00000003”, “”) in new stack
[2013-09-03 22:34:11] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:6] Playback(“SIP/8001-00000003”, “silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer”) in new stack
[2013-09-03 22:34:11] VERBOSE[18106][C-00000005] file.c: – <SIP/8001-00000003> Playing ‘silence/1.ulaw’ (language ‘en’)
[2013-09-03 22:34:12] VERBOSE[18106][C-00000005] file.c: – <SIP/8001-00000003> Playing ‘cannot-complete-as-dialed.ulaw’ (language ‘en’)
[2013-09-03 22:34:14] VERBOSE[18106][C-00000005] pbx.c: == Spawn extension (from-internal, 12061234567, 6) exited non-zero on ‘SIP/8001-00000003’
[2013-09-03 22:34:14] VERBOSE[18106][C-00000005] pbx.c: – Executing [[email protected]:1] Hangup(“SIP/8001-00000003”, “”) in new stack
[2013-09-03 22:34:14] VERBOSE[18106][C-00000005] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/8001-00000003’

#8

Very strange. The only thing I changed was under:
Connectivity>Google Voice [motif]
Click on my google voice number
Unclicked “Send Unanswered to Google Voicemail”

Also on my softphone I disabled the Secure RTP and it works… I’m scratching my head. But it works and I don’t know why. :frowning: Hope this help the rest of you folks who’s trying to do what I’m trying to do. :slight_smile:

#9

Here is the link on how to do it and how I got the resolution. Many thanks.

http://www.kossboss.com/freepbx---setup-free-voip-using-google-voice

#10