Can't call area code 605 using Google Voice/Motif

wmjackson · May 11, 2018, 9:40pm

My GV system works perfectly except for this. Unfortunately this is the number that has been assigned to me by my conference calling system.

I’m trying to dial (605)475-5950

here is some of the log from Asterisk

[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-outbound-callerid:11] Set(“SIP/101-0000005d”, “USEROUTCID=“Bill Jackson”<9254527102”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-outbound-callerid:12] Set(“SIP/101-0000005d”, “EMERGENCYCID=”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-outbound-callerid:13] Set(“SIP/101-0000005d”, “TRUNKOUTCID=9254527102”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-outbound-callerid:14] GotoIf(“SIP/101-0000005d”, “1?trunkcid”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx_builtins.c: Goto (macro-outbound-callerid,s,19)
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-outbound-callerid:19] ExecIf(“SIP/101-0000005d”, “1?Set(CALLERID(all)=9254527102)”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-outbound-callerid:20] ExecIf(“SIP/101-0000005d”, “1?Set(CALLERID(all)=“Bill Jackson”<9254527102)”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-outbound-callerid:21] ExecIf(“SIP/101-0000005d”, “0?Set(CALLERID(all)=)”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-outbound-callerid:22] ExecIf(“SIP/101-0000005d”, “0?Set(CALLERPRES(name-pres)=prohib_passed_screen)”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-outbound-callerid:23] ExecIf(“SIP/101-0000005d”, “0?Set(CALLERPRES(num-pres)=prohib_passed_screen)”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-outbound-callerid:24] Set(“SIP/101-0000005d”, “CDR(outbound_cnum)=9254527102”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-outbound-callerid:25] Set(“SIP/101-0000005d”, “CDR(outbound_cnam)=Bill Jackson”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:13] GosubIf(“SIP/101-0000005d”, “0?sub-flp-1,s,1()”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:14] Set(“SIP/101-0000005d”, “OUTNUM=16054755950”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:15] Set(“SIP/101-0000005d”, “custom=AMP”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/101-0000005d”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)r)”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:17] ExecIf(“SIP/101-0000005d”, “0?Set(DIAL_TRUNK_OPTIONS=rM(confirm))”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:18] Macro(“SIP/101-0000005d”, “dialout-trunk-predial-hook,”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/101-0000005d”, “”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:19] GotoIf(“SIP/101-0000005d”, “0?bypass,1”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:20] ExecIf(“SIP/101-0000005d”, “1?Set(CONNECTEDLINE(num,i)=16054755950)”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:21] ExecIf(“SIP/101-0000005d”, “1?Set(CONNECTEDLINE(name,i)=CID:9254527102)”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:22] ExecIf(“SIP/101-0000005d”, “0?Set(CONNECTEDLINE(name,i)=CID:(Hidden)9254527102)”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:23] GotoIf(“SIP/101-0000005d”, “1?customtrunk”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx_builtins.c: Goto (macro-dialout-trunk,s,27)
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:27] Set(“SIP/101-0000005d”, “pre_num=AMP:Motif/gbilljackson0gmailcom/”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:28] Set(“SIP/101-0000005d”, “the_num=OUTNUM”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:29] Set(“SIP/101-0000005d”, "[email protected]") in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:30] GotoIf(“SIP/101-0000005d”, “1?outnum:skipoutnum”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx_builtins.c: Goto (macro-dialout-trunk,s,31)
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:31] Set(“SIP/101-0000005d”, “the_num=16054755950”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-dialout-trunk:32] Dial(“SIP/101-0000005d”, “Motif/gbilljackson0gmailcom/[email protected],300,r”) in new stack
[2018-05-11 17:03:46] VERBOSE[26952][C-0000005d] app_dial.c: Called Motif/gbilljackson0gmailcom/[email protected]
[2018-05-11 17:03:47] VERBOSE[26952][C-0000005d] app_dial.c: Motif/[email protected] is proceeding passing it to SIP/101-0000005d
[2018-05-11 17:03:47] VERBOSE[26952][C-0000005d] app_dial.c: Motif/[email protected] answered SIP/101-0000005d
[2018-05-11 17:03:47] VERBOSE[26954][C-0000005d] bridge_channel.c: Channel Motif/[email protected] joined ‘simple_bridge’ basic-bridge
[2018-05-11 17:03:47] VERBOSE[26952][C-0000005d] bridge_channel.c: Channel SIP/101-0000005d joined ‘simple_bridge’ basic-bridge
[2018-05-11 17:03:51] VERBOSE[26954][C-0000005d] bridge_channel.c: Channel Motif/[email protected] left ‘simple_bridge’ basic-bridge
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] bridge_channel.c: Channel SIP/101-0000005d left ‘simple_bridge’ basic-bridge
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] app_macro.c: Spawn extension (macro-dialout-trunk, s, 32) exited non-zero on ‘SIP/101-0000005d’ in macro ‘dialout-trunk’
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] pbx.c: Spawn extension (from-internal, 6054755950, 5) exited non-zero on ‘SIP/101-0000005d’
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] pbx.c: Executing [h@from-internal:1] Macro(“SIP/101-0000005d”, “hangupcall”) in new stack
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-hangupcall:1] GotoIf(“SIP/101-0000005d”, “1?theend”) in new stack
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-hangupcall:3] ExecIf(“SIP/101-0000005d”, “0?Set(CDR(recordingfile)=)”) in new stack
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-hangupcall:4] NoOp(“SIP/101-0000005d”, "Motif/[email protected] monior file= ") in new stack
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-hangupcall:5] AGI(“SIP/101-0000005d”, “attendedtransfer-rec-restart.php,Motif/[email protected],”) in new stack
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/attendedtransfer-rec-restart.php
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] res_agi.c: <SIP/101-0000005d>AGI Script attendedtransfer-rec-restart.php completed, returning 0
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] pbx.c: Executing [s@macro-hangupcall:6] Hangup(“SIP/101-0000005d”, “”) in new stack
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] app_macro.c: Spawn extension (macro-hangupcall, s, 6) exited non-zero on ‘SIP/101-0000005d’ in macro ‘hangupcall’
[2018-05-11 17:03:51] VERBOSE[26952][C-0000005d] pbx.c: Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/101-0000005d’

What happens is that I dial the number and get a voice recording (female) that says “we could not complete your call, please try again”

It seems that I can’t call anything in area code 605

suggestions?

tonyclewis · May 11, 2018, 11:02pm

That is because Google voice is blocking that call as it’s a high rate center call.

dicko · May 12, 2018, 12:09am

Rumor has it that it will stop working next month anyway.

Stewart1 · May 12, 2018, 4:29am

Possibly, 867 292 3030 (another access number of the same company and free on GV) will allow entry of the same meeting ID.

Various trunking providers offer +1 605 475 at $0.004/min. or less.

If you have any say about the conference provider, I recommend trying https://www.freeconferencecallhd.com/ . Although the business model is the same (they get a share of termination charges in a rural rate center), they offer SIP access, including wideband. Create an extension and change the Dial parameter to
SIP/[email protected]
where 7127704160 is your access number and 123456 is the host (or participant) code for your meetings. This is free and much better quality than a PSTN connection.

system · May 12, 2019, 4:29am

This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.