Cannot make outbound calls , please help

Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation
Asterisknow 1.7
CentOS 5.5

I am just a newbie to asterisk world. I was trying out asterisk,followed the manuals how to get started and the installation went well, successfully created trunk and registered it , status is showing trunk online as well, made outbound route containing _X. as dial pattern.
made working extension with xlite but I could not make outbound calls.

My carrier is registered as i checked through cli… the important thing is i m pretty new to asterisks and located in pakistan… have to call all over the world as have a small setup here with such a project…

Please help me out as i m a bit sure that there is some problem with my dial plan…

that is wat i get when i dialed from my xlite…

== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [00923225081954@from-internal:1] Macro(“SIP/1000-00000044”, “us er-callerid,SKIPTTL,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/1000-00000044”, “AMPUSER=100 0”) in new stack
– Executing [s@macro-user-callerid:2] GotoIf(“SIP/1000-00000044”, "0?report ") in new stack
– Executing [s@macro-user-callerid:3] ExecIf(“SIP/1000-00000044”, “1?Set(RE ALCALLERIDNUM=1000)”) in new stack
– Executing [s@macro-user-callerid:4] Set(“SIP/1000-00000044”, “AMPUSER=100 0”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/1000-00000044”, “AMPUSERCIDN AME=1000”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/1000-00000044”, "0?report ") in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/1000-00000044”, “AMPUSERCID= 1000”) in new stack
– Executing [s@macro-user-callerid:8] Set(“SIP/1000-00000044”, “CALLERID(al l)=“1000” <1000>”) in new stack
– Executing [s@macro-user-callerid:9] GotoIf(“SIP/1000-00000044”, “1?contin ue”) in new stack
– Goto (macro-user-callerid,s,18)
– Executing [s@macro-user-callerid:18] Set(“SIP/1000-00000044”, “CALLERID(n umber)=1000”) in new stack
– Executing [s@macro-user-callerid:19] Set(“SIP/1000-00000044”, “CALLERID(n ame)=1000”) in new stack
– Executing [s@macro-user-callerid:20] NoOp(“SIP/1000-00000044”, “Using Cal lerID “1000” <1000>”) in new stack
– Executing [00923225081954@from-internal:2] Set(“SIP/1000-00000044”, “NOD EST=") in new stack
– Executing [00923225081954@from-internal:3] Macro(“SIP/1000-00000044”, “re cord-enable,1000,OUT,”) in new stack
– Executing [s@macro-record-enable:1] GotoIf(“SIP/1000-00000044”, “1?check” ) in new stack
– Goto (macro-record-enable,s,4)
– Executing [s@macro-record-enable:4] ExecIf(“SIP/1000-00000044”, “0?MacroE xit()”) in new stack
– Executing [s@macro-record-enable:5] GotoIf(“SIP/1000-00000044”, “0?Group: OUT”) in new stack
– Goto (macro-record-enable,s,15)
– Executing [s@macro-record-enable:15] GotoIf(“SIP/1000-00000044”, “0?IN”) in new stack
– Executing [s@macro-record-enable:16] ExecIf(“SIP/1000-00000044”, “1?Macro Exit()”) in new stack
– Executing [00923225081954@from-internal:4] Macro(“SIP/1000-00000044”, “di alout-trunk,2,00923225081954,”) in new stack
– Executing [s@macro-dialout-trunk:1] Set(“SIP/1000-00000044”, “DIAL_TRUNK= 2”) in new stack
– Executing [s@macro-dialout-trunk:2] GosubIf(“SIP/1000-00000044”, “0?sub-p incheck,s,1”) in new stack
– Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/1000-00000044”, “0?disabl etrunk,1”) in new stack
– Executing [s@macro-dialout-trunk:4] Set(“SIP/1000-00000044”, “DIAL_NUMBER =00923225081954”) in new stack
– Executing [s@macro-dialout-trunk:5] Set(“SIP/1000-00000044”, "DIAL_TRUNK
OPTIONS=tr”) in new stack
– Executing [s@macro-dialout-trunk:6] Set(“SIP/1000-00000044”, “OUTBOUND_GR OUP=OUT_2”) in new stack
– Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/1000-00000044”, “1?nomax” ) in new stack
– Goto (macro-dialout-trunk,s,9)
– Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/1000-00000044”, “0?skipou tcid”) in new stack
– Executing [s@macro-dialout-trunk:10] Set(“SIP/1000-00000044”, “DIAL_TRUNK _OPTIONS=”) in new stack
– Executing [s@macro-dialout-trunk:11] Macro(“SIP/1000-00000044”, “outbound -callerid,2”) in new stack
– Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/1000-00000044”, “0?Se t(CALLERPRES()=)”) in new stack
– Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/1000-00000044”, “0?Se t(REALCALLERIDNUM=1000)”) in new stack
– Executing [s@macro-outbound-callerid:3] GotoIf(“SIP/1000-00000044”, “1?no rmcid”) in new stack
– Goto (macro-outbound-callerid,s,6)
– Executing [s@macro-outbound-callerid:6] Set(“SIP/1000-00000044”, “USEROUT CID=6172056121”) in new stack
– Executing [s@macro-outbound-callerid:7] Set(“SIP/1000-00000044”, “EMERGEN CYCID=”) in new stack
– Executing [s@macro-outbound-callerid:8] Set(“SIP/1000-00000044”, “TRUNKOU TCID=6172056121”) in new stack
– Executing [s@macro-outbound-callerid:9] GotoIf(“SIP/1000-00000044”, “1?tr unkcid”) in new stack
– Goto (macro-outbound-callerid,s,12)
– Executing [s@macro-outbound-callerid:12] ExecIf(“SIP/1000-00000044”, “1?S et(CALLERID(all)=6172056121)”) in new stack
– Executing [s@macro-outbound-callerid:13] ExecIf(“SIP/1000-00000044”, “1?S et(CALLERID(all)=6172056121)”) in new stack
– Executing [s@macro-outbound-callerid:14] ExecIf(“SIP/1000-00000044”, “0?S et(CALLERID(all)=)”) in new stack
– Executing [s@macro-outbound-callerid:15] ExecIf(“SIP/1000-00000044”, “0?S et(CALLERPRES()=prohib_passed_screen)”) in new stack
– Executing [s@macro-dialout-trunk:12] ExecIf(“SIP/1000-00000044”, “0?AGI(f ixlocalprefix)”) in new stack
– Executing [s@macro-dialout-trunk:13] Set(“SIP/1000-00000044”, “OUTNUM=009 23225081954”) in new stack
– Executing [s@macro-dialout-trunk:14] Set(“SIP/1000-00000044”, “custom=SIP /Voipomatic”) in new stack
– Executing [s@macro-dialout-trunk:15] ExecIf(“SIP/1000-00000044”, “0?Set(D IAL_TRUNK_OPTIONS=M(setmusic^))”) in new stack
– Executing [s@macro-dialout-trunk:16] Macro(“SIP/1000-00000044”, “dialout- trunk-predial-hook,”) in new stack
– Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/1000-0000 0044”, “”) in new stack
– Executing [s@macro-dialout-trunk:17] GotoIf(“SIP/1000-00000044”, “0?bypas s,1”) in new stack
– Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/1000-00000044”, “0?custo mtrunk”) in new stack
– Executing [s@macro-dialout-trunk:19] Dial(“SIP/1000-00000044”, “SIP/Voipo matic/00923225081954,300,”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Called Voipomatic/00923225081954
– SIP/Voipomatic-00000045 answered SIP/1000-00000044
– Packet2Packet bridging SIP/1000-00000044 and SIP/Voipomatic-00000045
== Manager ‘admin’ logged on from 127.0.0.1
== Manager ‘admin’ logged off from 127.0.0.1
– Executing [h@macro-dialout-trunk:1] Macro(“SIP/1000-00000044”, “hangupcal l,”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“SIP/1000-00000044”, “1?skiprg”) in new stack
– Goto (macro-hangupcall,s,4)
– Executing [s@macro-hangupcall:4] GotoIf(“SIP/1000-00000044”, "1?skipblkvm ") in new stack
– Goto (macro-hangupcall,s,7)
– Executing [s@macro-hangupcall:7] GotoIf(“SIP/1000-00000044”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,9)
– Executing [s@macro-hangupcall:9] Hangup(“SIP/1000-00000044”, “”) in new s tack
== Spawn extension (macro-hangupcall, s, 9) exited non-zero on ‘SIP/1000-00000 044’ in macro ‘hangupcall’
== Spawn extension (macro-dialout-trunk, h, 1) exited non-zero on ‘SIP/1000-00 000044’
== Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on ‘SIP/1000-0 0000044’ in macro ‘dialout-trunk’
== Spawn extension (from-internal, 00923225081954, 4) exited non-zero on ‘SIP/ 1000-00000044’
– Executing [h@from-internal:1] Macro(“SIP/1000-00000044”, “hangupcall”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“SIP/1000-00000044”, “1?skiprg”) in new stack
– Goto (macro-hangupcall,s,4)
– Executing [s@macro-hangupcall:4] GotoIf(“SIP/1000-00000044”, "1?skipblkvm ") in new stack
– Goto (macro-hangupcall,s,7)
– Executing [s@macro-hangupcall:7] GotoIf(“SIP/1000-00000044”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,9)
– Executing [s@macro-hangupcall:9] Hangup(“SIP/1000-00000044”, “”) in new s tack
== Spawn extension (macro-hangupcall, s, 9) exited non-zero on ‘SIP/1000-00000 044’ in macro ‘hangupcall’
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/1000-00000044

I am sure if you dial the number without the prefix 00 it will. I have used many services so far and I bet voipomatic.com is the best I have found. Best rates with Best Quality.