Hi FrankB. Thanks for the tip.
I changed the asterisk version from 11 to 13 successfully. I then took a look at the installation notes for the Sangoma A200 card found at:
http://wiki.freepbx.org/display/PC/Telephony+Cards+for+Asterisk
I had none of the directory’s listed, in the usr/src (dahdi-linux-complete- + asterisk-). So I then proceeded to run through the installation and got the dahdi directory complete. The asterisk directory is incomplete as the “make” command stalls out with the following error message:
/usr/bin/ld: cannot find -lssl
collect2: ld returned 1 exit status
make[1]: *** [chan_pjsip.so] Error 1
make: *** [channels] Error 2
My understanding is the wanpipe drivers need to be installed in order for the A200 to be working. The above two directories must be present before the Wanpipe drivers need to be installed. Presently the card doesn’t seem to be recognized by the system. I haven’t had this much trouble installing a card nor setting up any type of system ever!
Any recommendations are greatly welcomed.
Thanks
Michael