hi guys, need some help figuring what’s the problem or is there something wrong with my configuration, currently i can receive calls but the thing is i cant make any outbound calls here’s my sip trunk settings also i dont have dahdi installed on the server
here are my current settings
Trunk Name: freepbx
Outbound CallerID: 919*******
Dialed Number Manipulation Rules
1+NXXNXXXXXX
1919+NXXXXXX
outgoing settings
context=from-pstn
type=peer
insecure=very
qualify=yes
sendrpid=yes
trustpid=yes
dtmfmod=rf2833
username=********
secret=********
host=trunk1.phonebooth.net
disallow=all
allow=ulaw&g729
register string
:@trunk1.phonebooth.net
i just left INCOMING SETTINGS blank because based from this guide
http://www.freepbx.org/freepbx-trunks i did not see any configuration for it
also i already did the necessary route configuration, i also posted the asterisk logs
[Jan 17 23:55:53] VERBOSE[2207] app_dial.c: – SIP/freepbx-0000001c is circuit-busy
[Jan 17 23:55:53] VERBOSE[2207] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Executing [s@macro-dialout-trunk:23] NoOp(“SIP/1001-0000001b”, “Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 19”) in new stack
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Executing [s@macro-dialout-trunk:24] Goto(“SIP/1001-0000001b”, “s-CONGESTION,1”) in new stack
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Goto (macro-dialout-trunk,s-CONGESTION,1)
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Executing [s-CONGESTION@macro-dialout-trunk:1] Set(“SIP/1001-0000001b”, “RC=19”) in new stack
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Executing [s-CONGESTION@macro-dialout-trunk:2] Goto(“SIP/1001-0000001b”, “19,1”) in new stack
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Goto (macro-dialout-trunk,19,1)
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Executing [19@macro-dialout-trunk:1] Goto(“SIP/1001-0000001b”, “continue,1”) in new stack
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Goto (macro-dialout-trunk,continue,1)
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Executing [continue@macro-dialout-trunk:1] GotoIf(“SIP/1001-0000001b”, “1?noreport”) in new stack
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Goto (macro-dialout-trunk,continue,3)
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Executing [continue@macro-dialout-trunk:3] NoOp(“SIP/1001-0000001b”, “TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 19 - failing through to other trunks”) in new stack
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Executing [continue@macro-dialout-trunk:4] Set(“SIP/1001-0000001b”, “CALLERID(number)=1001”) in new stack
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Executing [9195714014@from-internal:6] Macro(“SIP/1001-0000001b”, “outisbusy,”) in new stack
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Executing [s@macro-outisbusy:1] Progress(“SIP/1001-0000001b”, “”) in new stack
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Executing [s@macro-outisbusy:2] GotoIf(“SIP/1001-0000001b”, “0?emergency,1”) in new stack
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Executing [s@macro-outisbusy:3] GotoIf(“SIP/1001-0000001b”, “0?intracompany,1”) in new stack
[Jan 17 23:55:53] VERBOSE[2207] pbx.c: – Executing [s@macro-outisbusy:4] Playback(“SIP/1001-0000001b”, “all-circuits-busy-now&pls-try-call-later, noanswer”) in new stack
[Jan 17 23:55:53] VERBOSE[2207] file.c: – <SIP/1001-0000001b> Playing ‘all-circuits-busy-now.gsm’ (language ‘en’)
[Jan 17 23:55:54] VERBOSE[2207] file.c: – <SIP/1001-0000001b> Playing ‘pls-try-call-later.gsm’ (language ‘en’)
[Jan 17 23:55:57] VERBOSE[2207] pbx.c: – Executing [s@macro-outisbusy:5] Congestion(“SIP/1001-0000001b”, “20”) in new stack
[Jan 17 23:55:57] VERBOSE[2207] app_macro.c: == Spawn extension (macro-outisbusy, s, 5) exited non-zero on ‘SIP/1001-0000001b’ in macro ‘outisbusy’
[Jan 17 23:55:57] VERBOSE[2207] pbx.c: == Spawn extension (from-internal, 9195714014, 6) exited non-zero on ‘SIP/1001-0000001b’
[Jan 17 23:55:57] VERBOSE[2207] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/1001-0000001b”, “”) in new stack
[Jan 17 23:55:57] VERBOSE[2207] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/1001-0000001b’
[Jan 17 23:56:43] VERBOSE[1851] netsock2.c: == Using SIP RTP TOS bits 184
[Jan 17 23:56:43] VERBOSE[1851] netsock2.c: == Using SIP RTP CoS mark 5
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [9195714014@from-internal:1] Macro(“SIP/1001-0000001d”, “user-callerid,LIMIT,”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/1001-0000001d”, “AMPUSER=1001”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:2] GotoIf(“SIP/1001-0000001d”, “0?report”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:3] ExecIf(“SIP/1001-0000001d”, “1?Set(REALCALLERIDNUM=1001)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:4] Set(“SIP/1001-0000001d”, “AMPUSER=1001”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/1001-0000001d”, “AMPUSERCIDNAME=1001”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/1001-0000001d”, “0?report”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/1001-0000001d”, “AMPUSERCID=1001”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:8] Set(“SIP/1001-0000001d”, “CALLERID(all)=“1001” <1001>”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:9] GotoIf(“SIP/1001-0000001d”, “0?limit”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:10] ExecIf(“SIP/1001-0000001d”, “1?Set(GROUP(concurrency_limit)=1001)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:11] GosubIf(“SIP/1001-0000001d”, “7?sub-ccss,s,1(from-internal,9195714014)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/1001-0000001d”, “0?Return()”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/1001-0000001d”, “CCSS_SETUP=TRUE”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/1001-0000001d”, “0?monitor_config,1(from-internal,9195714014):monitor_default,1(from-internal,9195714014)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/1001-0000001d”, “0?is_exten”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/1001-0000001d”, “”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/1001-0000001d”, “FALSE”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:12] ExecIf(“SIP/1001-0000001d”, “0?Set(CHANNEL(language)=)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:13] GotoIf(“SIP/1001-0000001d”, “1?continue”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Goto (macro-user-callerid,s,26)
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:26] Set(“SIP/1001-0000001d”, “CALLERID(number)=1001”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:27] Set(“SIP/1001-0000001d”, “CALLERID(name)=1001”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-user-callerid:28] Set(“SIP/1001-0000001d”, “CHANNEL(language)=en”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [9195714014@from-internal:2] Set(“SIP/1001-0000001d”, “MOHCLASS=default”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [9195714014@from-internal:3] Set(“SIP/1001-0000001d”, “_NODEST=”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [9195714014@from-internal:4] Gosub(“SIP/1001-0000001d”, “sub-record-check,s,1(out,9195714014,)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:1] GotoIf(“SIP/1001-0000001d”, “1?check”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Goto (sub-record-check,s,3)
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:3] Set(“SIP/1001-0000001d”, “MON_FMT=wav”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:4] GotoIf(“SIP/1001-0000001d”, “1?next”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Goto (sub-record-check,s,7)
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:7] ExecIf(“SIP/1001-0000001d”, “0?Return()”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:8] GotoIf(“SIP/1001-0000001d”, “0?out,1”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:9] Set(“SIP/1001-0000001d”, “__REC_STATUS=INITIALIZED”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:10] ExecIf(“SIP/1001-0000001d”, “0?Set(__REC_POLICY_MODE=)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:11] Set(“SIP/1001-0000001d”, “NOW=1326815803”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:12] Set(“SIP/1001-0000001d”, “__DAY=17”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:13] Set(“SIP/1001-0000001d”, “__MONTH=01”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:14] Set(“SIP/1001-0000001d”, “__YEAR=2012”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:15] Set(“SIP/1001-0000001d”, “__TIMESTR=20120117-235643”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:16] Set(“SIP/1001-0000001d”, “__FROMEXTEN=1001”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:17] Set(“SIP/1001-0000001d”, “__CALLFILENAME=out-9195714014-1001-20120117-235643-1326815803.29”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-record-check:18] Goto(“SIP/1001-0000001d”, “out,1”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Goto (sub-record-check,out,1)
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [out@sub-record-check:1] ExecIf(“SIP/1001-0000001d”, “1?Set(__REC_POLICY_MODE=dontcare)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [out@sub-record-check:2] GosubIf(“SIP/1001-0000001d”, “0?record,1(exten,9195714014,1001)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [out@sub-record-check:3] Return(“SIP/1001-0000001d”, “”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [9195714014@from-internal:5] Macro(“SIP/1001-0000001d”, “dialout-trunk,2,1919,”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:1] Set(“SIP/1001-0000001d”, “DIAL_TRUNK=2”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:2] GosubIf(“SIP/1001-0000001d”, “0?sub-pincheck,s,1()”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/1001-0000001d”, “0?disabletrunk,1”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:4] Set(“SIP/1001-0000001d”, “DIAL_NUMBER=1919”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:5] Set(“SIP/1001-0000001d”, “DIAL_TRUNK_OPTIONS=tr”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:6] Set(“SIP/1001-0000001d”, “OUTBOUND_GROUP=OUT_2”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/1001-0000001d”, “0?nomax”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:8] GotoIf(“SIP/1001-0000001d”, “0?chanfull”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/1001-0000001d”, “0?skipoutcid”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:10] Set(“SIP/1001-0000001d”, “DIAL_TRUNK_OPTIONS=”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:11] Macro(“SIP/1001-0000001d”, “outbound-callerid,2”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/1001-0000001d”, “0?Set(CALLERPRES()=)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/1001-0000001d”, “0?Set(REALCALLERIDNUM=1001)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outbound-callerid:3] GotoIf(“SIP/1001-0000001d”, “1?normcid”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Goto (macro-outbound-callerid,s,6)
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outbound-callerid:6] Set(“SIP/1001-0000001d”, “USEROUTCID=”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outbound-callerid:7] Set(“SIP/1001-0000001d”, “EMERGENCYCID=”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outbound-callerid:8] Set(“SIP/1001-0000001d”, “TRUNKOUTCID=9193555585”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outbound-callerid:9] GotoIf(“SIP/1001-0000001d”, “1?trunkcid”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Goto (macro-outbound-callerid,s,12)
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outbound-callerid:12] ExecIf(“SIP/1001-0000001d”, “1?Set(CALLERID(all)=9193555585)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outbound-callerid:13] ExecIf(“SIP/1001-0000001d”, “0?Set(CALLERID(all)=)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outbound-callerid:14] ExecIf(“SIP/1001-0000001d”, “0?Set(CALLERID(all)=)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outbound-callerid:15] ExecIf(“SIP/1001-0000001d”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:12] GosubIf(“SIP/1001-0000001d”, “1?sub-flp-2,s,1()”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-flp-2:1] ExecIf(“SIP/1001-0000001d”, “0?Set(TARGET_FLP_2=1)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-flp-2:2] GotoIf(“SIP/1001-0000001d”, “0?match”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-flp-2:3] ExecIf(“SIP/1001-0000001d”, “0?Set(TARGET_FLP_2=1919)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-flp-2:4] GotoIf(“SIP/1001-0000001d”, “0?match”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@sub-flp-2:5] Return(“SIP/1001-0000001d”, “”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:13] Set(“SIP/1001-0000001d”, “OUTNUM=1919”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:14] Set(“SIP/1001-0000001d”, “custom=SIP/freepbx”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:15] ExecIf(“SIP/1001-0000001d”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default))”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/1001-0000001d”, “0?Set(DIAL_TRUNK_OPTIONS=M(confirm))”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:17] Macro(“SIP/1001-0000001d”, “dialout-trunk-predial-hook,”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/1001-0000001d”, “”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/1001-0000001d”, “0?bypass,1”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:19] ExecIf(“SIP/1001-0000001d”, “1?Set(CONNECTEDLINE(num,i)=1919)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:20] ExecIf(“SIP/1001-0000001d”, “1?Set(CONNECTEDLINE(name,i)=CID:9193555585)”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:21] GotoIf(“SIP/1001-0000001d”, “0?customtrunk”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:22] Dial(“SIP/1001-0000001d”, “SIP/freepbx/1919,300,”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] netsock2.c: == Using SIP RTP TOS bits 184
[Jan 17 23:56:43] VERBOSE[2213] netsock2.c: == Using SIP RTP CoS mark 5
[Jan 17 23:56:43] VERBOSE[2213] app_dial.c: – Called freepbx/1919
[Jan 17 23:56:43] VERBOSE[1851] chan_sip.c: – Got SIP response 480 “temporarily unavailable” back from 184.72.227.214:5060
[Jan 17 23:56:43] VERBOSE[2213] app_dial.c: – SIP/freepbx-0000001e is circuit-busy
[Jan 17 23:56:43] VERBOSE[2213] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:23] NoOp(“SIP/1001-0000001d”, “Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 19”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-dialout-trunk:24] Goto(“SIP/1001-0000001d”, “s-CONGESTION,1”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Goto (macro-dialout-trunk,s-CONGESTION,1)
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s-CONGESTION@macro-dialout-trunk:1] Set(“SIP/1001-0000001d”, “RC=19”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s-CONGESTION@macro-dialout-trunk:2] Goto(“SIP/1001-0000001d”, “19,1”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Goto (macro-dialout-trunk,19,1)
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [19@macro-dialout-trunk:1] Goto(“SIP/1001-0000001d”, “continue,1”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Goto (macro-dialout-trunk,continue,1)
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [continue@macro-dialout-trunk:1] GotoIf(“SIP/1001-0000001d”, “1?noreport”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Goto (macro-dialout-trunk,continue,3)
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [continue@macro-dialout-trunk:3] NoOp(“SIP/1001-0000001d”, “TRUNK Dial failed due to CONGESTION HANGUPCAUSE: 19 - failing through to other trunks”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [continue@macro-dialout-trunk:4] Set(“SIP/1001-0000001d”, “CALLERID(number)=1001”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [9195714014@from-internal:6] Macro(“SIP/1001-0000001d”, “outisbusy,”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outisbusy:1] Progress(“SIP/1001-0000001d”, “”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outisbusy:2] GotoIf(“SIP/1001-0000001d”, “0?emergency,1”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outisbusy:3] GotoIf(“SIP/1001-0000001d”, “0?intracompany,1”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] pbx.c: – Executing [s@macro-outisbusy:4] Playback(“SIP/1001-0000001d”, “all-circuits-busy-now&pls-try-call-later, noanswer”) in new stack
[Jan 17 23:56:43] VERBOSE[2213] file.c: – <SIP/1001-0000001d> Playing ‘all-circuits-busy-now.gsm’ (language ‘en’)
[Jan 17 23:56:45] VERBOSE[2213] file.c: – <SIP/1001-0000001d> Playing ‘pls-try-call-later.gsm’ (language ‘en’)
[Jan 17 23:56:47] VERBOSE[2213] pbx.c: – Executing [s@macro-outisbusy:5] Congestion(“SIP/1001-0000001d”, “20”) in new stack
[Jan 17 23:56:47] VERBOSE[2213] app_macro.c: == Spawn extension (macro-outisbusy, s, 5) exited non-zero on ‘SIP/1001-0000001d’ in macro ‘outisbusy’
[Jan 17 23:56:47] VERBOSE[2213] pbx.c: == Spawn extension (from-internal, 9195714014, 6) exited non-zero on ‘SIP/1001-0000001d’
[Jan 17 23:56:47] VERBOSE[2213] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/1001-0000001d”, “”) in new stack
[Jan 17 23:56:47] VERBOSE[2213] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/1001-0000001d’
Thank You