Ok, I just recently “physically” moved my PBX from one part of my house to the other shutting it down and then booting back up. When it came online all the phones worked fine but incoming calls are not transferring to voice mail, the PBX is hanging up the call and my call then transfers to Googlevoice. I had a rung group before so I changed it to only ring an extension, I have VM enabled on the ext and a greeting recorded for unavail. I have tried changing the ring timeouts before going to VM to 7 seconds but that seems to be when the PBX is hanging up the call. I will include a putty session I had open and watched it hang up.
If there is any thing I can do to make this function properly again I would appreciate the info.
Executing [s@macro-dial-one:42] Dial(“Motif/+16517282258-af6d”, “SIP/1004,15,Ttr”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Called SIP/1004
– SIP/1004-00000013 is ringing
== Spawn extension (macro-dial-one, s, 42) exited non-zero on ‘Motif/+16517282258-af6d’ in macro ‘dial-one’
== Spawn extension (macro-exten-vm, s, 14) exited non-zero on ‘Motif/+16517282258-af6d’ in macro ‘exten-vm’
== Spawn extension (from-did-direct, 1004, 2) exited non-zero on ‘Motif/+16517282258-af6d’
– Executing [h@from-did-direct:1] Macro(“Motif/+16517282258-af6d”, “hangupcall,”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“Motif/+16517282258-af6d”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [s@macro-hangupcall:3] ExecIf(“Motif/+16517282258-af6d”, “0?Set(CDR(recordingfile)=)”) in new stack
– Executing [s@macro-hangupcall:4] Hangup(“Motif/+16517282258-af6d”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘Motif/+16517282258-af6d’ in macro ‘hangupcall’
== Spawn extension (from-did-direct, h, 1) exited non-zero on ‘Motif/+16517282258-af6d’