Called ID not working after module(s) updates and orderly shutdown

I’m a bit over my skis on this one.
After updating several modules followed by an orderly shutdown we initially lost inbound/outbound service. I was so panicked trying to restore I’m not totally sure what I did that resolved connectivity, I believe it was editing DAHDI trunk channel name. We can make and receive calls but caller id is not working.

Any help would be greatly appreciated.

tail -f /var/log/asterisk/full

lay:1] Goto(“DAHDI/i1/phone_number-4ca”, “state-,1”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (sub-presencestate-display,state-,1)
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [state-@sub-presencestate-display:1] Set(“DAHDI/i1/phone_number-4ca”, “PRESENCESTATE_DISPLAY=”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [state-@sub-presencestate-display:2] Return(“DAHDI/i1/phone_number-4ca”, “”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:6] Set(“DAHDI/i1/phone_number-4ca”, “CONNECTEDLINE(name)=Eric Schmidt”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:7] Set(“DAHDI/i1/phone_number-4ca”, “FM_DIALSTATUS=NOT_INUSE”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:8] Set(“DAHDI/i1/phone_number-4ca”, “__EXTTOCALL=105”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:9] Set(“DAHDI/i1/phone_number-4ca”, “__PICKUPMARK=105”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:10] Macro(“DAHDI/i1/phone_number-4ca”, “blkvm-setifempty,”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:1] GotoIf(“DAHDI/i1/phone_number-4ca”, “1?init”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (macro-blkvm-setifempty,s,4)
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:4] Set(“DAHDI/i1/phone_number-4ca”, “__BLKVM_CHANNEL=DAHDI/i1/phone_number-4ca”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:5] Set(“DAHDI/i1/phone_number-4ca”, “SHARED(BLKVM,DAHDI/i1/phone_number-4ca)=TRUE”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:6] Set(“DAHDI/i1/phone_number-4ca”, “GOSUB_RETVAL=TRUE”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:7] MacroExit(“DAHDI/i1/phone_number-4ca”, “”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:11] GotoIf(“DAHDI/i1/phone_number-4ca”, “1?skipov”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (from-did-direct,105,14)
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:14] Set(“DAHDI/i1/phone_number-4ca”, “RRNODEST=”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:15] Set(“DAHDI/i1/phone_number-4ca”, “__NODEST=105”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:16] GosubIf(“DAHDI/i1/phone_number-4ca”, “0?sub-fmsetcid,s,1()”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:17] Set(“DAHDI/i1/phone_number-4ca”, “RecordMethod=Group”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:18] Gosub(“DAHDI/i1/phone_number-4ca”, “sub-record-check,s,1(exten,105,)”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:1] GotoIf(“DAHDI/i1/phone_number-4ca”, “10?initialized”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (sub-record-check,s,10)
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:10] NoOp(“DAHDI/i1/phone_number-4ca”, “Recordings initialized”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:11] ExecIf(“DAHDI/i1/phone_number-4ca”, “1?Set(ARG3=dontcare)”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:12] Set(“DAHDI/i1/phone_number-4ca”, “REC_POLICY_MODE_SAVE=”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:13] ExecIf(“DAHDI/i1/phone_number-4ca”, “0?Set(REC_STATUS=NO)”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:14] GotoIf(“DAHDI/i1/phone_number-4ca”, “5?checkaction”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (sub-record-check,s,17)
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:17] GotoIf(“DAHDI/i1/phone_number-4ca”, “1?sub-record-check,exten,1”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (sub-record-check,exten,1)
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:1] NoOp(“DAHDI/i1/phone_number-4ca”, “Exten Recording Check between phone_number and 105”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/phone_number-4ca”, “CALLTYPE=external”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:3] ExecIf(“DAHDI/i1/phone_number-4ca”, “0?Set(CALLTYPE=)”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:4] Set(“DAHDI/i1/phone_number-4ca”, “CALLEE=dontcare”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:5] ExecIf(“DAHDI/i1/phone_number-4ca”, “0?Set(CALLEE=dontcare)”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:6] GotoIf(“DAHDI/i1/phone_number-4ca”, “1?callee”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (sub-record-check,exten,11)
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:11] Gosub(“DAHDI/i1/phone_number-4ca”, “recordcheck,1(dontcare,external,105)”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:1] NoOp(“DAHDI/i1/phone_number-4ca”, “Starting recording check against dontcare”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:2] Goto(“DAHDI/i1/phone_number-4ca”, “dontcare”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (sub-record-check,recordcheck,3)
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:3] Return(“DAHDI/i1/phone_number-4ca”, “”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:12] Return(“DAHDI/i1/phone_number-4ca”, “”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:19] GotoIf(“DAHDI/i1/phone_number-4ca”, “0 ?skipsimple”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:20] Macro(“DAHDI/i1/phone_number-4ca”, “simple-dial,105,19”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/i1/phone_number-4ca”, “__EXTTOCALL=105”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/phone_number-4ca”, “RT=19”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:3] Set(“DAHDI/i1/phone_number-4ca”, “CFUEXT=”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:4] Set(“DAHDI/i1/phone_number-4ca”, “CFBEXT=”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:5] Set(“DAHDI/i1/phone_number-4ca”, “CWI_TMP=”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:6] Macro(“DAHDI/i1/phone_number-4ca”, “dial-one,19,TtrI,105”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/i1/phone_number-4ca”, “DEXTEN=105”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/phone_number-4ca”, “DIALSTATUS_CW=”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:3] GosubIf(“DAHDI/i1/phone_number-4ca”, “0?screen,1()”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:4] GosubIf(“DAHDI/i1/phone_number-4ca”, “0?cf,1()”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:5] GotoIf(“DAHDI/i1/phone_number-4ca”, “1?skip1”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (macro-dial-one,s,8)
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:8] GotoIf(“DAHDI/i1/phone_number-4ca”, “0?nodial”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:9] GotoIf(“DAHDI/i1/phone_number-4ca”, “0?continue”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:10] Set(“DAHDI/i1/phone_number-4ca”, “EXTHASCW=ENABLED”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:11] GotoIf(“DAHDI/i1/phone_number-4ca”, “0?next1:cwinusebusy”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (macro-dial-one,s,23)
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:23] GotoIf(“DAHDI/i1/phone_number-4ca”, “1?next3:continue”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (macro-dial-one,s,24)
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:24] ExecIf(“DAHDI/i1/phone_number-4ca”, “0?Set(DIALSTATUS_CW=BUSY)”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:25] GotoIf(“DAHDI/i1/phone_number-4ca”, “0?nodial”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:26] GosubIf(“DAHDI/i1/phone_number-4ca”, “1?dstring,1():dlocal,1()”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/i1/phone_number-4ca”, “DSTRING=”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/phone_number-4ca”, “DEVICES=105”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:3] ExecIf(“DAHDI/i1/phone_number-4ca”, “0?Return()”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:4] ExecIf(“DAHDI/i1/phone_number-4ca”, “0?Set(DEVICES=05)”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:5] Set(“DAHDI/i1/phone_number-4ca”, “LOOPCNT=1”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:6] Set(“DAHDI/i1/phone_number-4ca”, “ITER=1”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:7] Set(“DAHDI/i1/phone_number-4ca”, “THISDIAL=SIP/105”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:8] GosubIf(“DAHDI/i1/phone_number-4ca”, “1?zap2dahdi,1()”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:1] ExecIf(“DAHDI/i1/phone_number-4ca”, “0?Return()”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/phone_number-4ca”, “NEWDIAL=”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:3] Set(“DAHDI/i1/phone_number-4ca”, “LOOPCNT2=1”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:4] Set(“DAHDI/i1/phone_number-4ca”, “ITER2=1”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:5] Set(“DAHDI/i1/phone_number-4ca”, “THISPART2=SIP/105”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:6] ExecIf(“DAHDI/i1/phone_number-4ca”, “0?Set(THISPART2=DAHDI/105)”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:7] Set(“DAHDI/i1/phone_number-4ca”, “NEWDIAL=SIP/105&”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:8] Set(“DAHDI/i1/phone_number-4ca”, “ITER2=2”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:9] GotoIf(“DAHDI/i1/phone_number-4ca”, “0?begin2”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:10] Set(“DAHDI/i1/phone_number-4ca”, “THISDIAL=SIP/105”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:11] Return(“DAHDI/i1/phone_number-4ca”, “”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:9] GotoIf(“DAHDI/i1/phone_number-4ca”, “1?doset”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (macro-dial-one,dstring,13)
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:13] Set(“DAHDI/i1/phone_number-4ca”, “DSTRING=SIP/105&”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:14] Set(“DAHDI/i1/phone_number-4ca”, “ITER=2”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:15] GotoIf(“DAHDI/i1/phone_number-4ca”, “0?begin”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:16] ExecIf(“DAHDI/i1/phone_number-4ca”, “0?Return()”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:17] Set(“DAHDI/i1/phone_number-4ca”, “DSTRING=SIP/105”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:18] Return(“DAHDI/i1/phone_number-4ca”, “”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:27] GotoIf(“DAHDI/i1/phone_number-4ca”, “0?nodial”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:28] GotoIf(“DAHDI/i1/phone_number-4ca”, “0?skiptrace”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:29] GosubIf(“DAHDI/i1/phone_number-4ca”, “1?ctset,1():ctclear,1()”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/i1/phone_number-4ca”, “DB(CALLTRACE/105)=phone_number”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:2] Return(“DAHDI/i1/phone_number-4ca”, “”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:30] Set(“DAHDI/i1/phone_number-4ca”, “D_OPTIONS=TtrIM(auto-blkvm)”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:31] ExecIf(“DAHDI/i1/phone_number-4ca”, “0?SIPAddHeader(Alert-Info: )”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:32] ExecIf(“DAHDI/i1/phone_number-4ca”, “0?SIPAddHeader()”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:33] ExecIf(“DAHDI/i1/phone_number-4ca”, “1?Set(CHANNEL(musicclass)=Movie-Themes)”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:34] GosubIf(“DAHDI/i1/phone_number-4ca”, “0?qwait,1()”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:35] Set(“DAHDI/i1/phone_number-4ca”, “__CWIGNORE=”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:36] Set(“DAHDI/i1/phone_number-4ca”, “__KEEPCID=TRUE”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:37] GotoIf(“DAHDI/i1/phone_number-4ca”, “0?usegoto,1”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:38] GotoIf(“DAHDI/i1/phone_number-4ca”, “1?godial”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (macro-dial-one,s,43)
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:43] Macro(“DAHDI/i1/phone_number-4ca”, “dialout-one-predial-hook,”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:1] MacroExit(“DAHDI/i1/phone_number-4ca”, “”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:44] ExecIf(“DAHDI/i1/phone_number-4ca”, “1?Set(D_OPTIONS=trIM(auto-blkvm)I)”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:45] Dial(“DAHDI/i1/phone_number-4ca”, “SIP/105,19,trIM(auto-blkvm)I”) in new stack
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] netsock2.c: == Using SIP RTP TOS bits 184
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] netsock2.c: == Using SIP RTP CoS mark 5
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] app_dial.c: – Called SIP/105
[2016-06-10 14:44:12] VERBOSE[2546][C-0000ce74] app_dial.c: – Connected line update to DAHDI/i1/phone_number-4ca prevented.
[2016-06-10 14:44:13] VERBOSE[2546][C-0000ce74] app_dial.c: – SIP/105-000007d4 is ringing
[2016-06-10 14:44:21] VERBOSE[5918][C-0000ce74] sig_pri.c: – Span 1: Channel 0/1 got hangup request, cause 16
[2016-06-10 14:44:21] VERBOSE[2546][C-0000ce74] app_macro.c: == Spawn extension (macro-dial-one, s, 45) exited non-zero on ‘DAHDI/i1/phone_number-4ca’ in macro ‘dial-one’
[2016-06-10 14:44:21] VERBOSE[2546][C-0000ce74] app_macro.c: == Spawn extension (macro-simple-dial, s, 6) exited non-zero on ‘DAHDI/i1/phone_number-4ca’ in macro ‘simple-dial’
[2016-06-10 14:44:21] VERBOSE[2546][C-0000ce74] pbx.c: == Spawn extension (from-did-direct, 105, 20) exited non-zero on ‘DAHDI/i1/phone_number-4ca’
[2016-06-10 14:44:21] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:1] Macro(“DAHDI/i1/phone_number-4ca”, “hangupcall,”) in new stack
[2016-06-10 14:44:21] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:1] ExecIf(“DAHDI/i1/phone_number-4ca”, “0?Set(CDR(recordingfile)=.wav)”) in new stack
[2016-06-10 14:44:21] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:2] GotoIf(“DAHDI/i1/phone_number-4ca”, “1?theend”) in new stack
[2016-06-10 14:44:21] VERBOSE[2546][C-0000ce74] pbx.c: – Goto (macro-hangupcall,s,4)
[2016-06-10 14:44:21] VERBOSE[2546][C-0000ce74] pbx.c: – Executing [[email protected]:4] Hangup(“DAHDI/i1/phone_number-4ca”, “”) in new stack
[2016-06-10 14:44:21] VERBOSE[2546][C-0000ce74] app_macro.c: == Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘DAHDI/i1/phone_number-4ca’ in macro ‘hangupcall’
[2016-06-10 14:44:21] VERBOSE[2546][C-0000ce74] pbx.c: == Spawn extension (from-did-direct, h, 1) exited non-zero on ‘DAHDI/i1/phone_number-4ca’
[2016-06-10 14:44:21] VERBOSE[2546][C-0000ce74] chan_dahdi.c: – Hungup 'DAHDI/i1/phone_number-4ca’
tail -f /var/log/asterisk/full

Post here what you have in the following files

chan_dahdi.conf
chan_dahdi_additional.conf
dahd-channels.conf

Also make a new test, I think the log that you posted is not complete. When you finish the test, copy the output from /var/log/asterisk/full here.

Thank you so much for the replying.
Please let me know if you need anything else.

Here you go…

chan_dahdi.conf
> ;--------------------------------------------------------------------------------;
> ; Do NOT edit this file as it is auto-generated by FreePBX. ;
> ;--------------------------------------------------------------------------------;
> ; For information on adding additional paramaters to this file, please visit the ;
> ; FreePBX.org wiki page, or ask on IRC. This file was created by the new FreePBX ;
> ; BMO - Big Module Object. Any similarity in naming with BMO from Adventure Time ;
> ; is totally deliberate. ;
> ;--------------------------------------------------------------------------------;
> [general]

> ; generated by module
> #include chan_dahdi_general.conf

> ; for user additions not provided by module
> #include chan_dahdi_general_custom.conf

> [channels]
> language=en
> busydetect=yes
> busycount=10
> usecallerid=yes
> callwaiting=yes
> usecallingpres=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=no
> immediate=no
> faxdetect=no
> rxgain=0.0
> txgain=0.0

> ; for user additions not provided by module
> #include chan_dahdi_channels_custom.conf

> ; include dahdi groups defined by DAHDI module of FreePBX
> #include chan_dahdi_groups.conf

> ; include dahdi extensions defined in FreePBX
> #include chan_dahdi_additional.conf

chan_dahdi_additional.conf

> ;--------------------------------------------------------------------------------;
> ;          Do NOT edit this file as it is auto-generated by FreePBX.             ;
> ;--------------------------------------------------------------------------------;
> ; For information on adding additional paramaters to this file, please visit the ;
> ; FreePBX.org wiki page, or ask on IRC. This file was created by the new FreePBX ;
> ; BMO - Big Module Object. Any similarity in naming with BMO from Adventure Time ;
> ; is totally deliberate.                                                         ;
> ;--------------------------------------------------------------------------------;

dahd-channels.conf

> ; Autogenerated by /usr/sbin/dahdi_genconf on Thu May  5 19:22:51 2016
> ; If you edit this file and execute /usr/sbin/dahdi_genconf again,
> ; your manual changes will be LOST.
> ; Dahdi Channels Configurations (chan_dahdi.conf)
> ;
> ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
> ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
> ;

> ; Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER) 
> group=0,11
> context=from-pstn
> switchtype = national
> signalling = pri_cpe
> channel => 1-23
> context = default
> group = 63

tail -f /var/log/asterisk/full
Note: replaced actual number with phone_number

[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Goto (sub-record-check,exten,11)
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:11] Gosub(“DAHDI/i1/phone_number-5da”, “recordcheck,1(dontcare,external,105)”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:1] NoOp(“DAHDI/i1/phone_number-5da”, “Starting recording check against dontcare”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:2] Goto(“DAHDI/i1/phone_number-5da”, “dontcare”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Goto (sub-record-check,recordcheck,3)
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:3] Return(“DAHDI/i1/phone_number-5da”, “”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:12] Return(“DAHDI/i1/phone_number-5da”, “”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:19] GotoIf(“DAHDI/i1/phone_number-5da”, “0 ?skipsimple”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:20] Macro(“DAHDI/i1/phone_number-5da”, “simple-dial,105,19”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/i1/phone_number-5da”, “__EXTTOCALL=105”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/phone_number-5da”, “RT=19”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:3] Set(“DAHDI/i1/phone_number-5da”, “CFUEXT=”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:4] Set(“DAHDI/i1/phone_number-5da”, “CFBEXT=”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:5] Set(“DAHDI/i1/phone_number-5da”, “CWI_TMP=”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:6] Macro(“DAHDI/i1/phone_number-5da”, “dial-one,19,TtrI,105”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/i1/phone_number-5da”, “DEXTEN=105”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/phone_number-5da”, “DIALSTATUS_CW=”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:3] GosubIf(“DAHDI/i1/phone_number-5da”, “0?screen,1()”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:4] GosubIf(“DAHDI/i1/phone_number-5da”, “0?cf,1()”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:5] GotoIf(“DAHDI/i1/phone_number-5da”, “1?skip1”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Goto (macro-dial-one,s,8)
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:8] GotoIf(“DAHDI/i1/phone_number-5da”, “0?nodial”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:9] GotoIf(“DAHDI/i1/phone_number-5da”, “0?continue”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:10] Set(“DAHDI/i1/phone_number-5da”, “EXTHASCW=ENABLED”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:11] GotoIf(“DAHDI/i1/phone_number-5da”, “0?next1:cwinusebusy”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Goto (macro-dial-one,s,23)
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:23] GotoIf(“DAHDI/i1/phone_number-5da”, “1?next3:continue”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Goto (macro-dial-one,s,24)
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:24] ExecIf(“DAHDI/i1/phone_number-5da”, “0?Set(DIALSTATUS_CW=BUSY)”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:25] GotoIf(“DAHDI/i1/phone_number-5da”, “0?nodial”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:26] GosubIf(“DAHDI/i1/phone_number-5da”, “1?dstring,1():dlocal,1()”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/i1/phone_number-5da”, “DSTRING=”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/phone_number-5da”, “DEVICES=105”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:3] ExecIf(“DAHDI/i1/phone_number-5da”, “0?Return()”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:4] ExecIf(“DAHDI/i1/phone_number-5da”, “0?Set(DEVICES=05)”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:5] Set(“DAHDI/i1/phone_number-5da”, “LOOPCNT=1”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:6] Set(“DAHDI/i1/phone_number-5da”, “ITER=1”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:7] Set(“DAHDI/i1/phone_number-5da”, “THISDIAL=SIP/105”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:8] GosubIf(“DAHDI/i1/phone_number-5da”, “1?zap2dahdi,1()”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:1] ExecIf(“DAHDI/i1/phone_number-5da”, “0?Return()”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:2] Set(“DAHDI/i1/phone_number-5da”, “NEWDIAL=”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:3] Set(“DAHDI/i1/phone_number-5da”, “LOOPCNT2=1”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:4] Set(“DAHDI/i1/phone_number-5da”, “ITER2=1”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:5] Set(“DAHDI/i1/phone_number-5da”, “THISPART2=SIP/105”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:6] ExecIf(“DAHDI/i1/phone_number-5da”, “0?Set(THISPART2=DAHDI/105)”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:7] Set(“DAHDI/i1/phone_number-5da”, “NEWDIAL=SIP/105&”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:8] Set(“DAHDI/i1/phone_number-5da”, “ITER2=2”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:9] GotoIf(“DAHDI/i1/phone_number-5da”, “0?begin2”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:10] Set(“DAHDI/i1/phone_number-5da”, “THISDIAL=SIP/105”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:11] Return(“DAHDI/i1/phone_number-5da”, “”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:9] GotoIf(“DAHDI/i1/phone_number-5da”, “1?doset”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Goto (macro-dial-one,dstring,13)
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:13] Set(“DAHDI/i1/phone_number-5da”, “DSTRING=SIP/105&”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:14] Set(“DAHDI/i1/phone_number-5da”, “ITER=2”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:15] GotoIf(“DAHDI/i1/phone_number-5da”, “0?begin”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:16] ExecIf(“DAHDI/i1/phone_number-5da”, “0?Return()”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:17] Set(“DAHDI/i1/phone_number-5da”, “DSTRING=SIP/105”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:18] Return(“DAHDI/i1/phone_number-5da”, “”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:27] GotoIf(“DAHDI/i1/phone_number-5da”, “0?nodial”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:28] GotoIf(“DAHDI/i1/phone_number-5da”, “0?skiptrace”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:29] GosubIf(“DAHDI/i1/phone_number-5da”, “1?ctset,1():ctclear,1()”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:1] Set(“DAHDI/i1/phone_number-5da”, “DB(CALLTRACE/105)=phone_number”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:2] Return(“DAHDI/i1/phone_number-5da”, “”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:30] Set(“DAHDI/i1/phone_number-5da”, “D_OPTIONS=TtrIM(auto-blkvm)”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:31] ExecIf(“DAHDI/i1/phone_number-5da”, “0?SIPAddHeader(Alert-Info: )”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:32] ExecIf(“DAHDI/i1/phone_number-5da”, “0?SIPAddHeader()”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:33] ExecIf(“DAHDI/i1/phone_number-5da”, “1?Set(CHANNEL(musicclass)=Movie-Themes)”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:34] GosubIf(“DAHDI/i1/phone_number-5da”, “0?qwait,1()”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:35] Set(“DAHDI/i1/phone_number-5da”, “__CWIGNORE=”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:36] Set(“DAHDI/i1/phone_number-5da”, “__KEEPCID=TRUE”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:37] GotoIf(“DAHDI/i1/phone_number-5da”, “0?usegoto,1”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:38] GotoIf(“DAHDI/i1/phone_number-5da”, “1?godial”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Goto (macro-dial-one,s,43)
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:43] Macro(“DAHDI/i1/phone_number-5da”, “dialout-one-predial-hook,”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:1] MacroExit(“DAHDI/i1/phone_number-5da”, “”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:44] ExecIf(“DAHDI/i1/phone_number-5da”, “1?Set(D_OPTIONS=trIM(auto-blkvm)I)”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:45] Dial(“DAHDI/i1/phone_number-5da”, “SIP/105,19,trIM(auto-blkvm)I”) in new stack
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] netsock2.c: == Using SIP RTP TOS bits 184
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] netsock2.c: == Using SIP RTP CoS mark 5
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] app_dial.c: – Called SIP/105
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] app_dial.c: – Connected line update to DAHDI/i1/phone_number-5da prevented.
[2016-06-20 11:46:05] VERBOSE[21198][C-0001072a] app_dial.c: – SIP/105-0000098e is ringing
[2016-06-20 11:46:09] VERBOSE[5918][C-0001072a] sig_pri.c: – Span 1: Channel 0/2 got hangup request, cause 16
[2016-06-20 11:46:09] VERBOSE[21198][C-0001072a] app_macro.c: == Spawn extension (macro-dial-one, s, 45) exited non-zero on ‘DAHDI/i1/phone_number-5da’ in macro ‘dial-one’
[2016-06-20 11:46:09] VERBOSE[21198][C-0001072a] app_macro.c: == Spawn extension (macro-simple-dial, s, 6) exited non-zero on ‘DAHDI/i1/phone_number-5da’ in macro ‘simple-dial’
[2016-06-20 11:46:09] VERBOSE[21198][C-0001072a] pbx.c: == Spawn extension (from-did-direct, 105, 20) exited non-zero on ‘DAHDI/i1/phone_number-5da’
[2016-06-20 11:46:09] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:1] Macro(“DAHDI/i1/phone_number-5da”, “hangupcall,”) in new stack
[2016-06-20 11:46:09] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:1] ExecIf(“DAHDI/i1/phone_number-5da”, “0?Set(CDR(recordingfile)=.wav)”) in new stack
[2016-06-20 11:46:09] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:2] GotoIf(“DAHDI/i1/phone_number-5da”, “1?theend”) in new stack
[2016-06-20 11:46:09] VERBOSE[21198][C-0001072a] pbx.c: – Goto (macro-hangupcall,s,4)
[2016-06-20 11:46:09] VERBOSE[21198][C-0001072a] pbx.c: – Executing [[email protected]:4] Hangup(“DAHDI/i1/phone_number-5da”, “”) in new stack
[2016-06-20 11:46:09] VERBOSE[21198][C-0001072a] app_macro.c: == Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘DAHDI/i1/phone_number-5da’ in macro ‘hangupcall’
[2016-06-20 11:46:09] VERBOSE[21198][C-0001072a] pbx.c: == Spawn extension (from-did-direct, h, 1) exited non-zero on ‘DAHDI/i1/phone_number-5da’
[2016-06-20 11:46:09] VERBOSE[21198][C-0001072a] chan_dahdi.c: – Hungup ‘DAHDI/i1/phone_number-5da’

Does the number that you are making the calls to ends with the number 105?
Do you have an inbound route for this DID?
If not try to set a new inbound route with did number 105 and as destination extension 105. Try again and post here the log.

I’m dialing the main number, which goes to the main IVR then I’m dialing the ext 105. We have DID but they are not used atm.

Make again a test but get everything in the log and post here again, from the moment that the calls gets in your pbx till it has hanged up.

The log’s I posted are complete cut and paste of what I see in the terminal. I’ll try it again and see if I can capture additional information.
Thanks again for the help

inbound call is at the bottom.

tail -f /var/log/asterisk/full
Note: replaced actual number with phone_number

[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:5] Set("DAHDI/i1/*phone_number*-61f", "CWI_TMP=") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:6] Macro("DAHDI/i1/*phone_number*-61f", "dial-one,19,TtrI,105") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:1] Set("DAHDI/i1/*phone_number*-61f", "DEXTEN=105") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:2] Set("DAHDI/i1/*phone_number*-61f", "DIALSTATUS_CW=") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:3] GosubIf("DAHDI/i1/*phone_number*-61f", "0?screen,1()") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:4] GosubIf("DAHDI/i1/*phone_number*-61f", "0?cf,1()") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:5] GotoIf("DAHDI/i1/*phone_number*-61f", "1?skip1") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Goto (macro-dial-one,s,8)
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:8] GotoIf("DAHDI/i1/*phone_number*-61f", "0?nodial") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:9] GotoIf("DAHDI/i1/*phone_number*-61f", "0?continue") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:10] Set("DAHDI/i1/*phone_number*-61f", "EXTHASCW=ENABLED") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:11] GotoIf("DAHDI/i1/*phone_number*-61f", "0?next1:cwinusebusy") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Goto (macro-dial-one,s,23)
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:23] GotoIf("DAHDI/i1/*phone_number*-61f", "1?next3:continue") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Goto (macro-dial-one,s,24)
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:24] ExecIf("DAHDI/i1/*phone_number*-61f", "0?Set(DIALSTATUS_CW=BUSY)") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:25] GotoIf("DAHDI/i1/*phone_number*-61f", "0?nodial") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:26] GosubIf("DAHDI/i1/*phone_number*-61f", "1?dstring,1():dlocal,1()") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:1] Set("DAHDI/i1/*phone_number*-61f", "DSTRING=") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:2] Set("DAHDI/i1/*phone_number*-61f", "DEVICES=105") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:3] ExecIf("DAHDI/i1/*phone_number*-61f", "0?Return()") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:4] ExecIf("DAHDI/i1/*phone_number*-61f", "0?Set(DEVICES=05)") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:5] Set("DAHDI/i1/*phone_number*-61f", "LOOPCNT=1") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:6] Set("DAHDI/i1/*phone_number*-61f", "ITER=1") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:7] Set("DAHDI/i1/*phone_number*-61f", "THISDIAL=SIP/105") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:8] GosubIf("DAHDI/i1/*phone_number*-61f", "1?zap2dahdi,1()") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:1] ExecIf("DAHDI/i1/*phone_number*-61f", "0?Return()") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:2] Set("DAHDI/i1/*phone_number*-61f", "NEWDIAL=") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:3] Set("DAHDI/i1/*phone_number*-61f", "LOOPCNT2=1") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:4] Set("DAHDI/i1/*phone_number*-61f", "ITER2=1") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:5] Set("DAHDI/i1/*phone_number*-61f", "THISPART2=SIP/105") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:6] ExecIf("DAHDI/i1/*phone_number*-61f", "0?Set(THISPART2=DAHDI/105)") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:7] Set("DAHDI/i1/*phone_number*-61f", "NEWDIAL=SIP/105&") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:8] Set("DAHDI/i1/*phone_number*-61f", "ITER2=2") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:9] GotoIf("DAHDI/i1/*phone_number*-61f", "0?begin2") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:10] Set("DAHDI/i1/*phone_number*-61f", "THISDIAL=SIP/105") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:11] Return("DAHDI/i1/*phone_number*-61f", "") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:9] GotoIf("DAHDI/i1/*phone_number*-61f", "1?doset") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Goto (macro-dial-one,dstring,13)
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:13] Set("DAHDI/i1/*phone_number*-61f", "DSTRING=SIP/105&") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:14] Set("DAHDI/i1/*phone_number*-61f", "ITER=2") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:15] GotoIf("DAHDI/i1/*phone_number*-61f", "0?begin") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:16] ExecIf("DAHDI/i1/*phone_number*-61f", "0?Return()") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:17] Set("DAHDI/i1/*phone_number*-61f", "DSTRING=SIP/105") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:18] Return("DAHDI/i1/*phone_number*-61f", "") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:27] GotoIf("DAHDI/i1/*phone_number*-61f", "0?nodial") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:28] GotoIf("DAHDI/i1/*phone_number*-61f", "0?skiptrace") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:29] GosubIf("DAHDI/i1/*phone_number*-61f", "1?ctset,1():ctclear,1()") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:1] Set("DAHDI/i1/*phone_number*-61f", "DB(CALLTRACE/105)=*phone_number*") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:2] Return("DAHDI/i1/*phone_number*-61f", "") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:30] Set("DAHDI/i1/*phone_number*-61f", "D_OPTIONS=TtrIM(auto-blkvm)") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:31] ExecIf("DAHDI/i1/*phone_number*-61f", "0?SIPAddHeader(Alert-Info: )") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:32] ExecIf("DAHDI/i1/*phone_number*-61f", "0?SIPAddHeader()") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:33] ExecIf("DAHDI/i1/*phone_number*-61f", "1?Set(CHANNEL(musicclass)=Movie-Themes)") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:34] GosubIf("DAHDI/i1/*phone_number*-61f", "0?qwait,1()") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:35] Set("DAHDI/i1/*phone_number*-61f", "__CWIGNORE=") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:36] Set("DAHDI/i1/*phone_number*-61f", "__KEEPCID=TRUE") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:37] GotoIf("DAHDI/i1/*phone_number*-61f", "0?usegoto,1") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:38] GotoIf("DAHDI/i1/*phone_number*-61f", "1?godial") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Goto (macro-dial-one,s,43)
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:43] Macro("DAHDI/i1/*phone_number*-61f", "dialout-one-predial-hook,") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:1] MacroExit("DAHDI/i1/*phone_number*-61f", "") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:44] ExecIf("DAHDI/i1/*phone_number*-61f", "1?Set(D_OPTIONS=trIM(auto-blkvm)I)") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:45] Dial("DAHDI/i1/*phone_number*-61f", "SIP/105,19,trIM(auto-blkvm)I") in new stack
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] netsock2.c:   == Using SIP RTP TOS bits 184
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] netsock2.c:   == Using SIP RTP CoS mark 5
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] app_dial.c:     -- Called SIP/105
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] app_dial.c:     -- Connected line update to DAHDI/i1/*phone_number*-61f prevented.
[2016-06-21 12:14:26] VERBOSE[21881][C-00010d30] app_dial.c:     -- SIP/105-000009e1 is ringing
[2016-06-21 12:14:33] VERBOSE[21881][C-00010d30] app_dial.c:     -- Connected line update to DAHDI/i1/*phone_number*-61f prevented.
[2016-06-21 12:14:33] VERBOSE[21881][C-00010d30] app_dial.c:     -- SIP/105-000009e1 answered DAHDI/i1/*phone_number*-61f
[2016-06-21 12:14:33] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:1] Set("SIP/105-000009e1", "__MACRO_RESULT=") in new stack
[2016-06-21 12:14:33] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:2] Set("SIP/105-000009e1", "CFIGNORE=") in new stack
[2016-06-21 12:14:33] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:3] Set("SIP/105-000009e1", "MASTER_CHANNEL(CFIGNORE)=") in new stack
[2016-06-21 12:14:33] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:4] Set("SIP/105-000009e1", "FORWARD_CONTEXT=from-internal") in new stack
[2016-06-21 12:14:33] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:5] Set("SIP/105-000009e1", "MASTER_CHANNEL(FORWARD_CONTEXT)=from-internal") in new stack
[2016-06-21 12:14:33] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:6] Macro("SIP/105-000009e1", "blkvm-clr,") in new stack
[2016-06-21 12:14:33] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:1] Set("SIP/105-000009e1", "SHARED(BLKVM,DAHDI/i1/*phone_number*-61f)=") in new stack
[2016-06-21 12:14:33] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:2] Set("SIP/105-000009e1", "GOSUB_RETVAL=") in new stack
[2016-06-21 12:14:33] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:3] MacroExit("SIP/105-000009e1", "") in new stack
[2016-06-21 12:14:33] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:7] ExecIf("SIP/105-000009e1", "0?Set(MASTER_CHANNEL(CONNECTEDLINE(num))=105)") in new stack
[2016-06-21 12:14:33] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:8] ExecIf("SIP/105-000009e1", "0?Set(MASTER_CHANNEL(CONNECTEDLINE(name))=Eric Schmidt)") in new stack
[2016-06-21 12:14:37] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:1] Macro("DAHDI/i1/*phone_number*-61f", "hangupcall,") in new stack
[2016-06-21 12:14:37] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:1] ExecIf("DAHDI/i1/*phone_number*-61f", "0?Set(CDR(recordingfile)=.wav)") in new stack
[2016-06-21 12:14:37] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:2] GotoIf("DAHDI/i1/*phone_number*-61f", "1?theend") in new stack
[2016-06-21 12:14:37] VERBOSE[21881][C-00010d30] pbx.c:     -- Goto (macro-hangupcall,s,4)
[2016-06-21 12:14:37] VERBOSE[21881][C-00010d30] pbx.c:     -- Executing [[email protected]:4] Hangup("DAHDI/i1/*phone_number*-61f", "") in new stack
[2016-06-21 12:14:37] VERBOSE[21881][C-00010d30] app_macro.c:   == Spawn extension (macro-hangupcall, s, 4) exited non-zero on 'DAHDI/i1/*phone_number*-61f' in macro 'hangupcall'
[2016-06-21 12:14:37] VERBOSE[21881][C-00010d30] pbx.c:   == Spawn extension (macro-dial-one, h, 1) exited non-zero on 'DAHDI/i1/*phone_number*-61f'
[2016-06-21 12:14:37] VERBOSE[21881][C-00010d30] app_macro.c:   == Spawn extension (macro-dial-one, s, 45) exited non-zero on 'DAHDI/i1/*phone_number*-61f' in macro 'dial-one'
[2016-06-21 12:14:37] VERBOSE[21881][C-00010d30] app_macro.c:   == Spawn extension (macro-simple-dial, s, 6) exited non-zero on 'DAHDI/i1/*phone_number*-61f' in macro 'simple-dial'
[2016-06-21 12:14:37] VERBOSE[21881][C-00010d30] pbx.c:   == Spawn extension (from-did-direct, 105, 20) exited non-zero on 'DAHDI/i1/*phone_number*-61f'
[2016-06-21 12:14:37] VERBOSE[21881][C-00010d30] chan_dahdi.c:     -- Hungup 'DAHDI/i1/*phone_number*-61f'

Did you tried to send the calls straight to an extension to see what is happening.

using DID?

Below is a capture from cli, I do see a couple warnings, not sure is this has anything useful.

[[email protected]*my_domain* ~]# asterisk -r
Asterisk 11.18.0, Copyright (C) 1999 - 2013 Digium, Inc. and others.
Created by Mark Spencer <[email protected]>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 11.18.0 currently running on *my_domain* (pid = 5432)
*my_domain**CLI> tail -f /var/log/asterisk/full
No such command 'tail -f /var/log/asterisk/full' (type 'core show help tail -f' for other possible commands)
[2016-06-21 12:21:00] NOTICE[22217]: pbx_spool.c:427 attempt_thread: Call completed to Local/[email protected]
[2016-06-21 12:21:02] WARNING[22231][C-00010d38]: chan_sip.c:22099 func_header_read: This function can only be used on SIP channels.
[2016-06-21 12:21:02] WARNING[22231][C-00010d38]: Ext. 4600:2 @ from-digital: Friendly Scanner from
[2016-06-21 12:21:09] WARNING[22231][C-00010d38]: func_presencestate.c:132 presence_read: PRESENCE_STATE unknown
*my_domain**CLI> login as: root
*my_domain**CLI> [email protected]*lan_ip*'s password:
No such command 'login as: root' (type 'core show help login as:' for other possible commands)
No such command '[email protected]*lan_ip*'s password:' (type 'core show help [email protected]*lan_ip*'s password:' for other possible commands)
*my_domain**CLI> Last login: Tue Jun 21 12:13:47 2016 from *login_pc_ip*
No such command 'Last login: Tue Jun 21 12:13:47 2016 from *login_pc_ip*' (type 'core show help Last login:' for other possible commands)
*my_domain**CLI>
*my_domain**CLI>
*my_domain**CLI>  _____              ____  ______  __
No such command ' _____              ____  ______  __' (type 'core show help _____ ____' for other possible commands)
*my_domain**CLI> |  ___| __ ___  ___|  _ \| __ ) \/ /
No such command '|  ___| __ ___  ___|  _ \| __ ) \/ /' (type 'core show help | ___|' for other possible commands)
*my_domain**CLI> | |_ | '__/ _ \/ _ \ |_) |  _ \  /
No such command '| |_ | '__/ _ \/ _ \ |_) |  _ \  /' (type 'core show help | |_' for other possible commands)
*my_domain**CLI> |  _|| | |  __/  __/  __/| |_) /  \
No such command '|  _|| | |  __/  __/  __/| |_) /  \' (type 'core show help | _||' for other possible commands)
*my_domain**CLI> |_|  |_|  \___|\___|_|   |____/_/\_\
No such command '|_|  |_|  \___|\___|_|   |____/_/\_\' (type 'core show help |_| |_|' for other possible commands)
*my_domain**CLI>
*my_domain**CLI> Interface eth0 IP: *lan_ip*
No such command 'Interface eth0 IP: *lan_ip*' (type 'core show help Interface eth0' for other possible commands)
*my_domain**CLI> Interface eth0 MAC: 00:25:64:3C:DE:93
No such command 'Interface eth0 MAC: 00:25:64:3C:DE:93' (type 'core show help Interface eth0' for other possible commands)
*my_domain**CLI> Interface eth1 IP: No IP
*my_domain**CLI> Interface eth1 MAC: 00:25:64:3C:DE:94
No such command 'Interface eth1 IP: No IP' (type 'core show help Interface eth1' for other possible commands)
No such command 'Interface eth1 MAC: 00:25:64:3C:DE:94' (type 'core show help Interface eth1' for other possible commands)
*my_domain**CLI>
*my_domain**CLI> Please note most tasks should be handled through the FreePBX UI.
No such command 'Please note most tasks should be handled through the FreePBX UI.' (type 'core show help Please note' for other possible commands)
*my_domain**CLI> You can access the FreePBX GUI by typing one of the above IP's in to your web browser.
No such command 'You can access the FreePBX GUI by typing one of the above IP's in to your web browser.' (type 'core show help You can' for other possible commands)
*my_domain**CLI> For support please visit http://www.freepbx.org/support-and-professional-services
No such command 'For support please visit http://www.freepbx.org/support-and-professional-services' (type 'core show help For support' for other possible commands)
*my_domain**CLI>
*my_domain**CLI> [[email protected]*my_domain* ~]# astrisk -r
No such command '[[email protected]*my_domain* ~]# astrisk -r' (type 'core show help [[email protected]*my_domain* ~]#' for other possible commands)
*my_domain**CLI> -bash: astrisk: command not found
No such command '-bash: astrisk: command not found' (type 'core show help -bash: astrisk:' for other possible commands)
*my_domain**CLI> [[email protected]*my_domain* ~]# asterisk -r
No such command '[[email protected]*my_domain* ~]# asterisk -r' (type 'core show help [[email protected]*my_domain* ~]#' for other possible commands)
*my_domain**CLI> Asterisk 11.18.0, Copyright (C) 1999 - 2013 Digium, Inc. and others.
No such command 'Asterisk 11.18.0, Copyright (C) 1999 - 2013 Digium, Inc. and others.' (type 'core show help Asterisk 11.18.0,' for other possible commands)
*my_domain**CLI> Created by Mark Spencer <[email protected]>
No such command 'Created by Mark Spencer <[email protected]>' (type 'core show help Created by' for other possible commands)
*my_domain**CLI> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
No such command 'Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.' (type 'core show help Asterisk comes' for other possible commands)
*my_domain**CLI> This is free software, with components licensed under the GNU General Public
No such command 'This is free software, with components licensed under the GNU General Public' (type 'core show help This is' for other possible commands)
*my_domain**CLI> License version 2 and other licenses; you are welcome to redistribute it under
No such command 'License version 2 and other licenses; you are welcome to redistribute it under' (type 'core show help License version' for other possible commands)
*my_domain**CLI> certain conditions. Type 'core show license' for details.
No such command 'certain conditions. Type 'core show license' for details.' (type 'core show help certain conditions.' for other possible commands)
*my_domain**CLI> =========================================================================
No such command '=========================================================================' (type 'core show help =========================================================================' for other possible commands)
*my_domain**CLI> Connected to Asterisk 11.18.0 currently running on *my_domain* (pid = 5432)
*my_domain**CLI> *my_domain**CLI> tail -f /var/log/asterisk/full
*my_domain**CLI> No such command 'tail -f /var/log/asterisk/full' (type 'core show help tail -f' for other possible commands)
No such command 'Connected to Asterisk 11.18.0 currently running on *my_domain* (pid = 5432)' (type 'core show help Connected to' for other possible commands)
No such command '*my_domain**CLI> tail -f /var/log/asterisk/full' (type 'core show help *my_domain**CLI> tail' for other possible commands)
No such command 'No such command 'tail -f /var/log/asterisk/full' (type 'core show help tail -f' for other possible commands)' (type 'core show help No such' for other possible commands)
*my_domain**CLI> [2016-06-21 12:21:00] NOTICE[22217]: pbx_spool.c:427 attempt_thread: Call completed to Local/[email protected]
*my_domain**CLI> [2016-06-21 12:21:02] WARNING[22231][C-00010d38]: chan_sip.c:22099 func_header_read: This function can only be used on SIP channels.
*my_domain**CLI> [2016-06-21 12:21:02] WARNING[22231][C-00010d38]: Ext. 4600:2 @ from-digital: Friendly Scanner from
*my_domain**CLI> [2016-06-21 12:21:09] WARNING[22231][C-00010d38]: func_presencestate.c:132 presence_read: PRESENCE_STATE unknown
*my_domain**CLI> *my_domain**CLI>
No such command '[2016-06-21 12:21:00] NOTICE[22217]: pbx_spool.c:427 attempt_thread: Call completed to Local/[email protected]' (type 'core show help [2016-06-21 12:21:00]' for other possible commands)
No such command '[2016-06-21 12:21:02] WARNING[22231][C-00010d38]: chan_sip.c:22099 func_header_read: This function can only be used on SIP channels.' (type 'core show help [2016-06-21 12:21:02]' for other possible commands)
No such command '[2016-06-21 12:21:02] WARNING[22231][C-00010d38]: Ext. 4600:2 @ from-digital: Friendly Scanner from' (type 'core show help [2016-06-21 12:21:02]' for other possible commands)
No such command '[2016-06-21 12:21:09] WARNING[22231][C-00010d38]: func_presencestate.c:132 presence_read: PRESENCE_STATE unknown' (type 'core show help [2016-06-21 12:21:09]' for other possible commands)
No such command '*my_domain**CLI>' (type 'core show help *my_domain**CLI>' for other possible commands)
*my_domain**CLI>

Quick update, I installed/config Superecta vs OPENCNAM and at the same time took another look at the DAHDi config. The switch type was set to EuroISDN, switched back to the default National ISDN2. Caller ID is now working, not sure which did the trick.

The switchtype is what fixed your issue. Superfecta functions only after you have received a cid value from the line.

Great to know, thanks again for your help!