Call forward on Cisco 7940 phone doesn't work

Hello,
For a while ago I setup an asterisk system with freePBX which works fine. But since an unknown time there is a problem with call forwarding. If I choose one of the Cisco 7940 phones and press the call forward button and enter the number for example 610 (which is a ring group to my cellphone) and save it, it won’t transfer all incoming calls to my cellphone. If I call to the number of the company, I only hear 1 time the calling sound and then it is quit. But if I dail 610 on the Cisco phone, everything works ok. Even if I try to call forward it to an internal number for example 1001, it also won’t work. Does anybody know what I am doing wrong?
FreePBX version is 2.11.0.43 and Asterisk is V11.17.0

I also have an log file from the last call (unfortunaly not complete because this post cannot have the whole thing)

[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:9] Gosub(“Local/[email protected];2”, “sub-record-check,s,1(rg,610,never)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “REC_POLICY_MODE_SAVE=dontcare”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:2] GotoIf(“Local/[email protected];2”, “1?check”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Goto (sub-record-check,s,7)
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:7] Set(“Local/[email protected];2”, “__MON_FMT=wav”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:8] GotoIf(“Local/[email protected];2”, “1?next”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Goto (sub-record-check,s,11)
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:11] ExecIf(“Local/[email protected];2”, “0?Return()”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:12] ExecIf(“Local/[email protected];2”, “0?Set(__REC_POLICY_MODE=never)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:13] GotoIf(“Local/[email protected];2”, “1?rg,1”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Goto (sub-record-check,rg,1)
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:1] GosubIf(“Local/[email protected];2”, “0?record,1(rg,dontcare,31244XXXXX2)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:2] Return(“Local/[email protected];2”, “”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:10] Set(“Local/[email protected];2”, “RingGroupMethod=ringall”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:11] Macro(“Local/[email protected];2”, “dial,50,Ttr,06XXXXXXX6#”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:1] GotoIf(“Local/[email protected];2”, “0?dial”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:2] SetMusicOnHold(“Local/[email protected];2”, “none”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:3] AGI(“Local/[email protected];2”, “dialparties.agi”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] res_agi.c: – Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] res_agi.c: dialparties.agi: Starting New Dialparties.agi
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] res_agi.c: dialparties.agi: Caller ID name is ‘31244XXXXX2’ number is ‘31244XXXXX2’
[2015-07-13 16:19:50] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1006-000233b6 connected line has changed. Saving it until answer for SIP/Budgetphone-000233b2
[2015-07-13 16:19:50] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1006-000233b6 is ringing
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] res_agi.c: dialparties.agi: Methodology of ring is ‘ringall’
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] res_agi.c: – dialparties.agi: Added extension 06XXXXXXX6# to extension map
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] res_agi.c: – dialparties.agi: Extension 06XXXXXXX6# cf is disabled
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] res_agi.c: – dialparties.agi: Filtered ARG3: 06XXXXXXX6
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] res_agi.c: – <Local/[email protected];2>AGI Script dialparties.agi completed, returning 0
[2015-07-13 16:19:50] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1004-000233b5 connected line has changed. Saving it until answer for SIP/Budgetphone-000233b2
[2015-07-13 16:19:50] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1004-000233b5 is ringing
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:7] Dial(“Local/[email protected];2”, “Local/[email protected]/n,50,TtrM(auto-blkvm)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19459][C-00022d51] app_dial.c: – Called Local/[email protected]/n
[2015-07-13 16:19:50] VERBOSE[19457][C-00022d51] app_dial.c: – Local/[email protected];1 is ringing
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:1] Macro(“Local/[email protected];2”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “TOUCH_MONITOR=1436797190.144658”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:2] Set(“Local/[email protected];2”, “AMPUSER=31244XXXXX2”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:3] GotoIf(“Local/[email protected];2”, “0?report”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:4] ExecIf(“Local/[email protected];2”, “1?Set(REALCALLERIDNUM=31244XXXXX2)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:5] Set(“Local/[email protected];2”, “AMPUSER=”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:6] GotoIf(“Local/[email protected];2”, “0?limit”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:7] Set(“Local/[email protected];2”, “AMPUSERCIDNAME=”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:8] GotoIf(“Local/[email protected];2”, “1?report”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Goto (macro-user-callerid,s,16)
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:16] GotoIf(“Local/[email protected];2”, “1?continue”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Goto (macro-user-callerid,s,30)
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:30] Set(“Local/[email protected];2”, “CALLERID(number)=31244XXXXX2”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:31] Set(“Local/[email protected];2”, “CALLERID(name)=31244XXXXX2”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:32] Set(“Local/[email protected];2”, “CDR(cnum)=31244XXXXX2”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:33] Set(“Local/[email protected];2”, “CDR(cnam)=31244XXXXX2”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:34] Set(“Local/[email protected];2”, “CHANNEL(language)=en”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:2] ExecIf(“Local/[email protected]-internal-000000ab;2”, “0 ?Set(CDR(accountcode)=)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:3] Set(“Local/[email protected];2”, “MOHCLASS=none”) in new stack
[2015-07-13 16:19:50] VERBOSE[19456][C-00022d50] app_dial.c: – SIP/Evacuator-uit-000233b1 is ringing
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];2”, “_NODEST=”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:5] Gosub(“Local/[email protected];2”, “sub-record-check,s,1(out,06XXXXXXX6,)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “REC_POLICY_MODE_SAVE=dontcare”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:2] GotoIf(“Local/[email protected];2”, “1?check”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Goto (sub-record-check,s,7)
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:7] Set(“Local/[email protected];2”, “__MON_FMT=wav”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:8] GotoIf(“Local/[email protected];2”, “1?next”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Goto (sub-record-check,s,11)
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:11] ExecIf(“Local/[email protected];2”, “0?Return()”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:12] ExecIf(“Local/[email protected];2”, “0?Set(__REC_POLICY_MODE=)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:13] GotoIf(“Local/[email protected];2”, “1?out,1”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Goto (sub-record-check,out,1)
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:1] ExecIf(“Local/[email protected];2”, “0?Set(__REC_POLICY_MODE=)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:2] GosubIf(“Local/[email protected];2”, “0?record,1(exten,06XXXXXXX6,31244XXXXX2)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:3] Return(“Local/[email protected];2”, “”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:6] Macro(“Local/[email protected];2”, “dialout-trunk,2,06XXXXXXX6,off”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];2”, “DIAL_TRUNK=2”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:2] GosubIf(“Local/[email protected];2”, “0?sub-pincheck,s,1()”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:3] GotoIf(“Local/[email protected];2”, “0?disabletrunk,1”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];2”, “DIAL_NUMBER=06XXXXXXX6”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:5] Set(“Local/[email protected];2”, “DIAL_TRUNK_OPTIONS=Ttr”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:6] Set(“Local/[email protected];2”, “OUTBOUND_GROUP=OUT_2”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:7] GotoIf(“Local/[email protected];2”, “0?nomax”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:8] GotoIf(“Local/[email protected];2”, “0?chanfull”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:9] GotoIf(“Local/[email protected];2”, “0?skipoutcid”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:10] Set(“Local/[email protected];2”, “DIAL_TRUNK_OPTIONS=Tt”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:11] Macro(“Local/[email protected];2”, “outbound-callerid,2”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:1] ExecIf(“Local/[email protected];2”, “1?Set(CALLERPRES()=allowed_not_screened)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:2] ExecIf(“Local/[email protected];2”, “0?Set(REALCALLERIDNUM=31244XXXXX2)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:3] GotoIf(“Local/[email protected];2”, “0?normcid”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];2”, “USEROUTCID=31244XXXXX2”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:5] GotoIf(“Local/[email protected];2”, “1?bypass”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Goto (macro-outbound-callerid,s,7)
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:7] Set(“Local/[email protected];2”, “EMERGENCYCID=”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:8] Set(“Local/[email protected];2”, “TRUNKOUTCID=31243XXXXX0”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:9] GotoIf(“Local/[email protected];2”, “1?trunkcid”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Goto (macro-outbound-callerid,s,14)
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:14] ExecIf(“Local/[email protected];2”, “1?Set(CALLERID(all)=31243XXXXX0)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:15] ExecIf(“Local/[email protected];2”, “1?Set(CALLERID(all)=31244XXXXX2)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:16] ExecIf(“Local/[email protected];2”, “0?Set(CALLERID(all)=)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:17] ExecIf(“Local/[email protected];2”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:18] Set(“Local/[email protected];2”, “CDR(outbound_cnum)=31244XXXXX2”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:19] Set(“Local/[email protected];2”, “CDR(outbound_cnam)=”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:12] GosubIf(“Local/[email protected];2”, “0?sub-flp-2,s,1()”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:13] Set(“Local/[email protected];2”, “OUTNUM=06XXXXXXX6”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:14] Set(“Local/[email protected];2”, “custom=SIP/Budgetphone”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:15] ExecIf(“Local/[email protected];2”, “1?Set(DIAL_TRUNK_OPTIONS=M(setmusic^none)Tt)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:16] ExecIf(“Local/[email protected];2”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^none)TtM(confirm))”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:17] Macro(“Local/[email protected];2”, “dialout-trunk-predial-hook,”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:1] MacroExit(“Local/[email protected];2”, “”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:18] GotoIf(“Local/[email protected];2”, “0?bypass,1”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:19] ExecIf(“Local/[email protected];2”, “0?Set(CONNECTEDLINE(num,i)=06XXXXXXX6)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:20] ExecIf(“Local/[email protected];2”, “0?Set(CONNECTEDLINE(name,i)=CID:31244XXXXX2)”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:21] GotoIf(“Local/[email protected];2”, “0?customtrunk”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:22] Dial(“Local/[email protected];2”, “SIP/Budgetphone/06XXXXXXX6,300,M(setmusic^none)Tt”) in new stack
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] netsock2.c: == Using SIP RTP TOS bits 184
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] netsock2.c: == Using SIP RTP CoS mark 5
[2015-07-13 16:19:50] VERBOSE[19461][C-00022d51] app_dial.c: – Called SIP/Budgetphone/06XXXXXXX6
[2015-07-13 16:19:50] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1002-000233b4 connected line has changed. Saving it until answer for SIP/Budgetphone-000233b2
[2015-07-13 16:19:50] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1002-000233b4 is ringing
[2015-07-13 16:19:50] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1008-000233b7 connected line has changed. Saving it until answer for SIP/Budgetphone-000233b2
[2015-07-13 16:19:50] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1008-000233b7 is ringing
[2015-07-13 16:19:50] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1000-000233b3 connected line has changed. Saving it until answer for SIP/Budgetphone-000233b2
[2015-07-13 16:19:50] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1000-000233b3 is ringing
[2015-07-13 16:19:50] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1012-000233b9 connected line has changed. Saving it until answer for SIP/Budgetphone-000233b2
[2015-07-13 16:19:50] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1012-000233b9 is ringing
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1013-000233ba connected line has changed. Saving it until answer for SIP/Budgetphone-000233b2
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] app_dial.c: – SIP/1013-000233ba is ringing
[2015-07-13 16:19:51] VERBOSE[19461][C-00022d51] app_dial.c: – SIP/Budgetphone-000233bb answered Local/[email protected];2
[2015-07-13 16:19:51] VERBOSE[19461][C-00022d51] pbx.c: – Executing [[email protected]:1] Set(“SIP/Budgetphone-000233bb”, “CHANNEL(musicclass)=none”) in new stack
[2015-07-13 16:19:51] VERBOSE[19459][C-00022d51] app_dial.c: – Local/[email protected];1 answered Local/[email protected];2
[2015-07-13 16:19:51] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];1”, “__MACRO_RESULT=”) in new stack
[2015-07-13 16:19:51] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:2] Set(“Local/[email protected];1”, “CFIGNORE=”) in new stack
[2015-07-13 16:19:51] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:3] Set(“Local/[email protected];1”, “MASTER_CHANNEL(CFIGNORE)=”) in new stack
[2015-07-13 16:19:51] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];1”, “FORWARD_CONTEXT=from-internal”) in new stack
[2015-07-13 16:19:51] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:5] Set(“Local/[email protected];1”, “MASTER_CHANNEL(FORWARD_CONTEXT)=from-internal”) in new stack
[2015-07-13 16:19:51] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:6] Macro(“Local/[email protected];1”, “blkvm-clr,”) in new stack
[2015-07-13 16:19:51] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];1”, “SHARED(BLKVM,SIP/Budgetphone-000233b2)=”) in new stack
[2015-07-13 16:19:51] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:2] Set(“Local/[email protected];1”, “GOSUB_RETVAL=”) in new stack
[2015-07-13 16:19:51] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:3] MacroExit(“Local/[email protected];1”, “”) in new stack
[2015-07-13 16:19:51] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:7] ExecIf(“Local/[email protected];1”, “0?Set(MASTER_CHANNEL(CONNECTEDLINE(num))[email protected]/n)”) in new stack
[2015-07-13 16:19:51] VERBOSE[19459][C-00022d51] pbx.c: – Executing [[email protected]:8] ExecIf(“Local/[email protected];1”, “0?Set(MASTER_CHANNEL(CONNECTEDLINE(name))=)”) in new stack
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] app_dial.c: – Local/[email protected];1 answered SIP/Budgetphone-000233b2
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];1”, “__MACRO_RESULT=”) in new stack
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] pbx.c: – Executing [[email protected]:2] Set(“Local/[email protected];1”, “CFIGNORE=”) in new stack
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] pbx.c: – Executing [[email protected]:3] Set(“Local/[email protected];1”, “MASTER_CHANNEL(CFIGNORE)=”) in new stack
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] pbx.c: – Executing [[email protected]:4] Set(“Local/[email protected];1”, “FORWARD_CONTEXT=from-internal”) in new stack
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] pbx.c: – Executing [[email protected]:5] Set(“Local/[email protected];1”, “MASTER_CHANNEL(FORWARD_CONTEXT)=from-internal”) in new stack
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] pbx.c: – Executing [[email protected]:6] Macro(“Local/[email protected];1”, “blkvm-clr,”) in new stack
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] pbx.c: – Executing [[email protected]:1] Set(“Local/[email protected];1”, “SHARED(BLKVM,SIP/Budgetphone-000233b2)=”) in new stack
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] pbx.c: – Executing [[email protected]:2] Set(“Local/[email protected];1”, “GOSUB_RETVAL=”) in new stack
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] pbx.c: – Executing [[email protected]:3] MacroExit(“Local/[email protected];1”, “”) in new stack
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] pbx.c: – Executing [[email protected]:7] ExecIf(“Local/[email protected];1”, “0?Set(MASTER_CHANNEL(CONNECTEDLINE(num))=)”) in new stack
[2015-07-13 16:19:51] VERBOSE[19457][C-00022d51] pbx.c: – Executing [[email protected]:8] ExecIf(“Local/[email protected];1”, “0?Set(MASTER_CHANNEL(CONNECTEDLINE(name))=)”) in new stack
[2015-07-13 16:19:51] VERBOSE[19456][C-00022d50] app_dial.c: – SIP/Evacuator-uit-000233b1 answered SIP/1200-000233b0