I’m using Freepbx 13.0.189 / asterisk 13.11.2.
I would like to set up a GSM gateway using a Bluetooth adapter.
After pairing, I need to launch the command in Cli “mobile search” but I get a “No such command”.
Module chan_mobile.so is manually loaded from the Module admin interface.
Hi !
I found the way…
I was working on chan_mobile.conf stored in /usr/share/asterisk/configs/ and not in /etc/asterisk/
I put a copy of chan_mobile.conf in /etc/asterisk/ followed by a “fwconsole restart”