Asterisk not ruuning

Came in yesterday to my phones not registered and my box saying Asterisk not running in red in the top corner.

Nothing has been changed or altered with for a lone time, system does have automatic updates via system manager, has there been any updates in the last couple of days ?

[[email protected] ~]# asterisk -r
Unable to connect to remote asterisk (does /var/run/asterisk/asterisk.ctl exist?

[[email protected] ~]# fwconsole restart
Asterisk not currently running
Running FreePBX shutdown…

UCP Node Server is not running
Chat Server is not running
Zulu Server is not running

Stopping Wanrouter for Sangoma Cards
Wanrouter Stopped
Stopping DAHDi for Digium Cards
DAHDi Stopped
Queue Callback Server is not running
Running FreePBX startup…
Writing out default Sangoma conf
Starting Wanrouter for Sangoma Cards
Wanrouter Started
DAHDi: Already started
Running Sysadmin Hooks
Restarting fail2ban
fail2ban Restart failed Failed: The command “/etc/init.d/fail2ban restart” failed.
Exit Code: 255(Unknown error)


Stopping fail2ban: [ OK ]
Ensuring logfiles are presentStarting fail2ban: [FAILED]

Error Output:

ERROR Server already running

Updating License Information for 75******
Starting Asterisk…
[-------------------->-------] 3 secs
Broadcast message from [email protected] (Tue May 23 08:06:30 2017):

Firewall service now starting.

[============================] 13 secs
Asterisk Started
Starting UCP Node Server…
[>---------------------------] 1 sec
Started UCP Node Server. PID is 4509
RestApps is not licensed.
[>---------------------------] 1 secStarting Chat Server…
[>---------------------------] 2 secs
Started Chat Server. PID is 4732
This product is not licensed
[[email protected] ~]#

Just done reboot number 6 and its back up

If you didn’t do anything to the system but reboot it 6 times, I’d start with copying everything on the system to a new hard drive. This sounds “hard drivey” to me. Other hardware problems could cause it too, but the stuff on the hard drive is a lot harder to replace than a bad RAM stick.

Did think about the hard drive, going to copy everything of it.

But thinking i might try another distro, as always had problems with the sangoma a200 card.

I’d proceed with the drive backup, just to be safe.

If you’re going to switch distros, you should use the FreePBX distro, just so you’re using the same software as all of us.

Iam already using FreePBX distro