After latest updates these Daemons show down restapps, ucp and xmpp

After installing last nights latest updates with the pm2 and xmpp failures, these daemons no longer start up on their own: Restapps, UCP and Xmpp. I did install the fix for Xmpp today, but no change. I can manually start all three daemons but after a reboot they don’t start on their own.

I updated another 13 today after the change to xmpp, received no errors whatsoever, but after a reboot the same three daemons don’t start and show ‘not running’ in the dashboard.

Anyone else seeing this? Any ideas?

fwconsole stop
fwconsole start

Paste output here.

Hello Andre, I have the exact same problem. I went ahead and put the commands above, they run but after a reboot the issue persist.

Here is the output.

pbx-02 ~]# fwconsole stop
Running FreePBX shutdown...

RestApps Server is not running
UCP Node Server is not running
Chat Server is not running
Zulu Server is not running
Shutting down Asterisk Gracefully. Will forcefully kill after 30 seconds.
Press C to Cancel
Press N to shut down NOW
[============================] 1 sec
Stopping Wanrouter for Sangoma Cards
Wanrouter Stopped
Stopping DAHDi for Digium Cards
DAHDi Stopped
Queue Callback Server is not running
[root@pbx-02 ~]#
[root@pbx-02 ~]# fwconsole start
Running FreePBX startup...
Taking too long? Customize the chown command, See
Setting Permissions...
        Collecting Files...Done
 65631/65631 [============================] 100%
Finished setting permissions
Writing out default Sangoma conf
Starting Wanrouter for Sangoma Cards
Wanrouter Started
DAHDi: Already started
Running Sysadmin Hooks
Restarting fail2ban
fail2ban Restarted
Updating License Information 
Starting Asterisk...
[============================] 1 sec
Asterisk Started
Starting RestApps Server...
[>---------------------------] 1 sec
Started RestApps Server. PID is 5025
Starting UCP Node Server...

Broadcast message from root@pbx-02 (Fri Apr 21 18:02:40 2017):

Firewall service now starting.

[>---------------------------] 1 sec
Started UCP Node Server. PID is 5465
RestApps is not licensed.
[>---------------------------] 1 secStarting Chat Server...
[>---------------------------] 1 sec
Started Chat Server. PID is 5970
This product is not licensed
[root@pbx-02 ~]#

That shows them starting. We will have to look into this.

pm2 v13.0.3.3

Andrew, all fixed…

Thank you!

1 Like