Hi.
I’ve a local install
PBX Firmware: 6.12.65-30
PBX Service Pack: 1.0.0.0
SIP TRUNK Service
Firewall forward ports
5060-5061
10000-20000
All users, extensions are local
Phones are Grandstream GXP2130
Firmware Version 1.0.5.33
I’m not using EndPoint
I’ve checked my dial plans
on the phone I’ve { x+ | +x+ | x+ | [x]+*x+ }
I can dial two different numbers and park the calls
I cannot make 3 way call
This is what I’m doing
Dial number A, answer,
press 3way call button
- (call is placed on hold, i can listen music)
- get dial tone
Dial number B, then press dial button, I’m returned immediately to call “A”
Any tip will be much appreciate it
Thanks
call log:
PBXCLI>
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [17083175590@from-internal:1] Macro(“SIP/103-00000017”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/103-00000017”, “TOUCH_MONITOR=1466532133.113”) in new stack
– Executing [s@macro-user-callerid:2] Set(“SIP/103-00000017”, “AMPUSER=103”) in new stack
– Executing [s@macro-user-callerid:3] GotoIf(“SIP/103-00000017”, “0?report”) in new stack
– Executing [s@macro-user-callerid:4] ExecIf(“SIP/103-00000017”, “1?Set(REALCALLERIDNUM=103)”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/103-00000017”, “AMPUSER=103”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/103-00000017”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/103-00000017”, “AMPUSERCIDNAME=103”) in new stack
– Executing [s@macro-user-callerid:8] GotoIf(“SIP/103-00000017”, “0?report”) in new stack
– Executing [s@macro-user-callerid:9] Set(“SIP/103-00000017”, “AMPUSERCID=103”) in new stack
– Executing [s@macro-user-callerid:10] Set(“SIP/103-00000017”, “__DIAL_OPTIONS=Ttr”) in new stack
– Executing [s@macro-user-callerid:11] Set(“SIP/103-00000017”, “CALLERID(all)=“103” <103>”) in new stack
– Executing [s@macro-user-callerid:12] GotoIf(“SIP/103-00000017”, “0?limit”) in new stack
– Executing [s@macro-user-callerid:13] ExecIf(“SIP/103-00000017”, “1?Set(GROUP(concurrency_limit)=103)”) in new stack
– Executing [s@macro-user-callerid:14] GosubIf(“SIP/103-00000017”, “7?sub-ccss,s,1(from-internal,17083175590)”) in new stack
– Executing [s@sub-ccss:1] ExecIf(“SIP/103-00000017”, “0?Return()”) in new stack
– Executing [s@sub-ccss:2] Set(“SIP/103-00000017”, “CCSS_SETUP=TRUE”) in new stack
– Executing [s@sub-ccss:3] GosubIf(“SIP/103-00000017”, “0?monitor_config,1(from-internal,17083175590):monitor_default,1(from-internal,17083175590)”) in new stack
– Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/103-00000017”, “0?is_exten”) in new stack
– Executing [monitor_default@sub-ccss:2] StackPop(“SIP/103-00000017”, “”) in new stack
– Executing [monitor_default@sub-ccss:3] Return(“SIP/103-00000017”, “FALSE”) in new stack
– Executing [s@macro-user-callerid:15] ExecIf(“SIP/103-00000017”, “0?Set(CHANNEL(language)=)”) in new stack
– Executing [s@macro-user-callerid:16] GotoIf(“SIP/103-00000017”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,30)
– Executing [s@macro-user-callerid:30] Set(“SIP/103-00000017”, “CALLERID(number)=103”) in new stack
– Executing [s@macro-user-callerid:31] Set(“SIP/103-00000017”, “CALLERID(name)=103”) in new stack
– Executing [s@macro-user-callerid:32] Set(“SIP/103-00000017”, “CDR(cnum)=103”) in new stack
– Executing [s@macro-user-callerid:33] Set(“SIP/103-00000017”, “CDR(cnam)=103”) in new stack
– Executing [s@macro-user-callerid:34] Set(“SIP/103-00000017”, “CHANNEL(language)=en”) in new stack
– Executing [17083175590@from-internal:2] Gosub(“SIP/103-00000017”, “sub-record-check,s,1(out,17083175590,dontcare)”) in new stack
– Executing [s@sub-record-check:1] GotoIf(“SIP/103-00000017”, “0?initialized”) in new stack
– Executing [s@sub-record-check:2] Set(“SIP/103-00000017”, “__REC_STATUS=INITIALIZED”) in new stack
– Executing [s@sub-record-check:3] Set(“SIP/103-00000017”, “NOW=1466532133”) in new stack
– Executing [s@sub-record-check:4] Set(“SIP/103-00000017”, “__DAY=21”) in new stack
– Executing [s@sub-record-check:5] Set(“SIP/103-00000017”, “__MONTH=06”) in new stack
– Executing [s@sub-record-check:6] Set(“SIP/103-00000017”, “__YEAR=2016”) in new stack
– Executing [s@sub-record-check:7] Set(“SIP/103-00000017”, “__TIMESTR=20160621-130213”) in new stack
– Executing [s@sub-record-check:8] Set(“SIP/103-00000017”, “__FROMEXTEN=103”) in new stack
– Executing [s@sub-record-check:9] Set(“SIP/103-00000017”, “__MON_FMT=wav”) in new stack
– Executing [s@sub-record-check:10] NoOp(“SIP/103-00000017”, “Recordings initialized”) in new stack
– Executing [s@sub-record-check:11] ExecIf(“SIP/103-00000017”, “0?Set(ARG3=dontcare)”) in new stack
– Executing [s@sub-record-check:12] Set(“SIP/103-00000017”, “REC_POLICY_MODE_SAVE=”) in new stack
– Executing [s@sub-record-check:13] ExecIf(“SIP/103-00000017”, “0?Set(REC_STATUS=NO)”) in new stack
– Executing [s@sub-record-check:14] GotoIf(“SIP/103-00000017”, “3?checkaction”) in new stack
– Goto (sub-record-check,s,17)
– Executing [s@sub-record-check:17] GotoIf(“SIP/103-00000017”, “1?sub-record-check,out,1”) in new stack
– Goto (sub-record-check,out,1)
– Executing [out@sub-record-check:1] NoOp(“SIP/103-00000017”, “Outbound Recording Check from 103 to 17083175590”) in new stack
– Executing [out@sub-record-check:2] Set(“SIP/103-00000017”, “RECMODE=dontcare”) in new stack
– Executing [out@sub-record-check:3] ExecIf(“SIP/103-00000017”, “1?Goto(routewins)”) in new stack
– Goto (sub-record-check,out,7)
– Executing [out@sub-record-check:7] Gosub(“SIP/103-00000017”, “recordcheck,1(dontcare,out,17083175590)”) in new stack
– Executing [recordcheck@sub-record-check:1] NoOp(“SIP/103-00000017”, “Starting recording check against dontcare”) in new stack
– Executing [recordcheck@sub-record-check:2] Goto(“SIP/103-00000017”, “dontcare”) in new stack
– Goto (sub-record-check,recordcheck,3)
– Executing [recordcheck@sub-record-check:3] Return(“SIP/103-00000017”, “”) in new stack
– Executing [out@sub-record-check:8] Return(“SIP/103-00000017”, “”) in new stack
– Executing [17083175590@from-internal:3] ExecIf(“SIP/103-00000017”, “0 ?Set(CDR(accountcode)=)”) in new stack
– Executing [17083175590@from-internal:4] Set(“SIP/103-00000017”, “MOHCLASS=default”) in new stack
– Executing [17083175590@from-internal:5] ExecIf(“SIP/103-00000017”, “0?Set(TRUNKCIDOVERRIDE=<3128889659>)”) in new stack
– Executing [17083175590@from-internal:6] Set(“SIP/103-00000017”, “_NODEST=”) in new stack
– Executing [17083175590@from-internal:7] Macro(“SIP/103-00000017”, “dialout-trunk,4,7083175590,off”) in new stack
– Executing [s@macro-dialout-trunk:1] Set(“SIP/103-00000017”, “DIAL_TRUNK=4”) in new stack
– Executing [s@macro-dialout-trunk:2] GosubIf(“SIP/103-00000017”, “0?sub-pincheck,s,1()”) in new stack
– Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/103-00000017”, “0?disabletrunk,1”) in new stack
– Executing [s@macro-dialout-trunk:4] Set(“SIP/103-00000017”, “DIAL_NUMBER=7083175590”) in new stack
– Executing [s@macro-dialout-trunk:5] Set(“SIP/103-00000017”, “DIAL_TRUNK_OPTIONS=Ttr”) in new stack
– Executing [s@macro-dialout-trunk:6] Set(“SIP/103-00000017”, “OUTBOUND_GROUP=OUT_4”) in new stack
– Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/103-00000017”, “1?nomax”) in new stack
– Goto (macro-dialout-trunk,s,9)
– Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/103-00000017”, “0?skipoutcid”) in new stack
– Executing [s@macro-dialout-trunk:10] Set(“SIP/103-00000017”, “DIAL_TRUNK_OPTIONS=Tt”) in new stack
– Executing [s@macro-dialout-trunk:11] Macro(“SIP/103-00000017”, “outbound-callerid,4”) in new stack
– Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/103-00000017”, “0?Set(CALLERPRES()=)”) in new stack
– Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/103-00000017”, “0?Set(REALCALLERIDNUM=103)”) in new stack
– Executing [s@macro-outbound-callerid:3] GotoIf(“SIP/103-00000017”, “1?normcid”) in new stack
– Goto (macro-outbound-callerid,s,6)
– Executing [s@macro-outbound-callerid:6] Set(“SIP/103-00000017”, “USEROUTCID=<3128889659>”) in new stack
– Executing [s@macro-outbound-callerid:7] Set(“SIP/103-00000017”, “EMERGENCYCID=”) in new stack
– Executing [s@macro-outbound-callerid:8] Set(“SIP/103-00000017”, “TRUNKOUTCID=<3128889659>”) in new stack
– Executing [s@macro-outbound-callerid:9] GotoIf(“SIP/103-00000017”, “1?trunkcid”) in new stack
– Goto (macro-outbound-callerid,s,14)
– Executing [s@macro-outbound-callerid:14] ExecIf(“SIP/103-00000017”, “1?Set(CALLERID(all)=<3128889659>)”) in new stack
– Executing [s@macro-outbound-callerid:15] ExecIf(“SIP/103-00000017”, “1?Set(CALLERID(all)=<3128889659>)”) in new stack
– Executing [s@macro-outbound-callerid:16] ExecIf(“SIP/103-00000017”, “0?Set(CALLERID(all)=)”) in new stack
– Executing [s@macro-outbound-callerid:17] ExecIf(“SIP/103-00000017”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
– Executing [s@macro-outbound-callerid:18] Set(“SIP/103-00000017”, “CDR(outbound_cnum)=3128889659”) in new stack
– Executing [s@macro-outbound-callerid:19] Set(“SIP/103-00000017”, “CDR(outbound_cnam)=”) in new stack
– Executing [s@macro-dialout-trunk:12] GosubIf(“SIP/103-00000017”, “0?sub-flp-4,s,1()”) in new stack
– Executing [s@macro-dialout-trunk:13] Set(“SIP/103-00000017”, “OUTNUM=7083175590”) in new stack
– Executing [s@macro-dialout-trunk:14] Set(“SIP/103-00000017”, “custom=SIP/OUT30”) in new stack
– Executing [s@macro-dialout-trunk:15] ExecIf(“SIP/103-00000017”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)Tt)”) in new stack
– Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/103-00000017”, “0?Set(DIAL_TRUNK_OPTIONS=TtM(confirm))”) in new stack
– Executing [s@macro-dialout-trunk:17] Macro(“SIP/103-00000017”, “dialout-trunk-predial-hook,”) in new stack
– Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/103-00000017”, “”) in new stack
– Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/103-00000017”, “0?bypass,1”) in new stack
– Executing [s@macro-dialout-trunk:19] ExecIf(“SIP/103-00000017”, “1?Set(CONNECTEDLINE(num,i)=7083175590)”) in new stack
– Executing [s@macro-dialout-trunk:20] ExecIf(“SIP/103-00000017”, “1?Set(CONNECTEDLINE(name,i)=CID:3128889659)”) in new stack
– Executing [s@macro-dialout-trunk:21] GotoIf(“SIP/103-00000017”, “0?customtrunk”) in new stack
– Executing [s@macro-dialout-trunk:22] Dial(“SIP/103-00000017”, “SIP/OUT30/7083175590,300,Tt”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Called SIP/OUT30/7083175590
> 0x7f2bc8023260 – Probation passed - setting RTP source address to 74.120.95.12:20878
– SIP/OUT30-00000018 is ringing
> 0x7f2bc8023260 – Probation passed - setting RTP source address to 74.120.95.12:20878
– SIP/OUT30-00000018 is making progress passing it to SIP/103-00000017
> 0x7f2bc8023260 – Probation passed - setting RTP source address to 74.120.95.12:20878
– SIP/OUT30-00000018 requested media update control 26, passing it to SIP/103-00000017
> 0x7f2ba401da70 – Probation passed - setting RTP source address to 10.11.10.99:5004
– SIP/OUT30-00000018 answered SIP/103-00000017
– Started music on hold, class ‘default’, on SIP/OUT30-00000018
– Stopped music on hold on SIP/OUT30-00000018
> 0x7f2ba401da70 – Probation passed - setting RTP source address to 10.11.10.99:5004
– Executing [h@macro-dialout-trunk:1] Macro(“SIP/103-00000017”, “hangupcall,”) in new stack
– Executing [s@macro-hangupcall:1] ExecIf(“SIP/103-00000017”, “0?Set(CDR(recordingfile)=.wav)”) in new stack
– Executing [s@macro-hangupcall:2] GotoIf(“SIP/103-00000017”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,4)
– Executing [s@macro-hangupcall:4] Hangup(“SIP/103-00000017”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘SIP/103-00000017’ in macro ‘hangupcall’
== Spawn extension (macro-dialout-trunk, h, 1) exited non-zero on ‘SIP/103-00000017’
== Spawn extension (macro-dialout-trunk, s, 22) exited non-zero on ‘SIP/103-00000017’ in macro ‘dialout-trunk’
== Spawn extension (from-internal, 17083175590, 7) exited non-zero on 'SIP/103-00000017’
BXCLI>