2 truncs works, but not 3

General Help
1

Hello all !

I registered in pbx 2.5.1.2 and asterisk 1.4.22-3 two trunks (the first two of the list below) and everything works fine. When I register the third trunk the reload doesn’t work until I delete the third trunc.

Do you have any idea what could be the problem ?

Thanks for any feedback !

Regards,
Fabianus

Here are the trunks :

Trunk Name :
OpenIP_10099

Peer details :
username=1009922
type=friend
secret=xxxxxxxxxx
relaxdtmf=yes
qualify=yes
port=5060
insecure=very
host=sip2.voip-centrex.net
disallow=all
context=from-trunk
allow=all

Registering string:
1009922:[email protected]/1009922

Trunk Name :
Dus.net_82

Peer details :
username=00038722233082
type=peer
secret=xxxxxxxxxx
relaxedtmf=yes
qualify=yes
port=5060
insecure=very
host=voip.dus.net
disallow=all
context=from-trunk
allow=all

Registering string:
00038722233082:[email protected]/00038722233082

Trunk Name :
Dus.net_54

Peer details :
username=00038227814354
type=peer
secret=xxxxxxxxx
relaxdtmf=yes
nat=yes
insecure=very
host=voip.dus.net
fromuser=00038227814354
fromdomain=voip.dus.net
disallow=all
canreinvite=no
allow=all

Registering string:
00038227814354:[email protected]/00038227814354

2

Not quite sure why this would be the case, unless the partition on the HDD in the server was getting full-this would be evident on the status screen of FreePBX.

We are using FreePBX 2.5.1.5 and have more than 6 trunks all set up and working fine, so it may be worthwhiile updating you modules.

3