Currently running FreePBX 13 and trying to upgrade to 15. I have a spare box that I am testing this on. My steps are: install fresh copy of 15 on spare box. Update modules and system. Then do a restore from 13 using nightly back. Restore runs fine.
Every thing comes over and all extensions (currently chan_sip) are there, sip trunks showing online.
Every time I have tried this (i have been trying for 3 days now), I use a spare phone, update ip address to point to new server and phone registers. When I do a test call, I get “The number you have dialed is not in service.”. I have tried about every suggestion I could find online and still get the same message.
I am able to register another phone and make calls between them, but dialing out produces the above error.
Any and all help would be appreciated. Thanks
Here is the output from sip debug; ******** equals my cell number.
<— SIP read from UDP:192.168.43.126:56564 —>
INVITE sip:********@192.168.43.15 SIP/2.0
Via: SIP/2.0/UDP 192.168.43.126:56564;branch=z9hG4bK193135480;rport
From: “105 Test” sip:[email protected];tag=784173465
To: sip:***********@192.168.43.15
Call-ID: [email protected]
CSeq: 20 INVITE
Contact: “105 Test” sip:[email protected]:56564
X-Grandstream-PBX: true
Max-Forwards: 70
User-Agent: Grandstream GXP2135 1.0.11.16
Privacy: none
P-Preferred-Identity: “105 Test” sip:[email protected]
P-Access-Network-Info: IEEE-EUI-48;eui-48-addr=04-D5-90-4C-66-7E
P-Emergency-Info: IEEE-EUI-48;eui-48-addr=C0-74-AD-2C-C5-D6
Supported: replaces, path, timer
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, INFO, REFER, UPDATE, MESSAGE
Content-Type: application/sdp
Accept: application/sdp, application/dtmf-relay
Content-Length: 436
v=0
o=105 8001 8000 IN IP4 192.168.43.126
s=SIP Call
c=IN IP4 192.168.43.126
t=0 0
m=audio 5006 RTP/AVP 0 8 4 18 9 97 2 123 101
a=sendrecv
a=rtpmap:0 PCMU/8000
a=ptime:20
a=rtpmap:8 PCMA/8000
a=rtpmap:4 G723/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:9 G722/8000
a=rtpmap:97 iLBC/8000
a=fmtp:97 mode=30
a=rtpmap:2 G726-32/8000
a=rtpmap:123 opus/48000/2
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
<------------->
— (19 headers 20 lines) —
Sending to 192.168.43.126:56564 (NAT)
Sending to 192.168.43.126:56564 (NAT)
Using INVITE request as basis request - [email protected]
Found peer ‘105’ for ‘105’ from 192.168.43.126:56564
<— Reliably Transmitting (no NAT) to 192.168.43.126:56564 —>
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 192.168.43.126:56564;branch=z9hG4bK193135480;received=192.168.43.126;rport=56564
From: “105 Test” sip:[email protected];tag=784173465
To: sip:**********@192.168.43.15;tag=as7a2d848a
Call-ID: [email protected]
CSeq: 20 INVITE
Server: FPBX-15.0.29(16.24.1)
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
WWW-Authenticate: Digest algorithm=MD5, realm=“asterisk”, nonce=“56d728ac”
Content-Length: 0
<------------>
Scheduling destruction of SIP dialog ‘[email protected]’ in 6400 ms (Method: INVITE)
<— SIP read from UDP:192.168.43.126:56564 —>
ACK sip:*********@192.168.43.15 SIP/2.0
Via: SIP/2.0/UDP 192.168.43.126:56564;branch=z9hG4bK193135480;rport
From: “105 Test” sip:[email protected];tag=784173465
To: sip:*************@192.168.43.15;tag=as7a2d848a
Call-ID: [email protected]
CSeq: 20 ACK
Content-Length: 0
<------------->
— (7 headers 0 lines) —
<— SIP read from UDP:192.168.43.126:56564 —>
INVITE sip:**********@192.168.43.15 SIP/2.0
Via: SIP/2.0/UDP 192.168.43.126:56564;branch=z9hG4bK934855233;rport
From: “105 Test” sip:[email protected];tag=784173465
To: sip:***********@192.168.43.15
Call-ID: [email protected]
CSeq: 21 INVITE
Contact: “105 Test” sip:[email protected]:56564
Authorization: Digest username=“105”, realm=“asterisk”, nonce=“56d728ac”, uri="sip:[email protected]", response=“afc06e85c49ee5bbf60fad7a55856549”, algorithm=MD5
X-Grandstream-PBX: true
Max-Forwards: 70
User-Agent: Grandstream GXP2135 1.0.11.16
Privacy: none
P-Preferred-Identity: “105 Test” sip:[email protected]
P-Access-Network-Info: IEEE-EUI-48;eui-48-addr=04-D5-90-4C-66-7E
P-Emergency-Info: IEEE-EUI-48;eui-48-addr=C0-74-AD-2C-C5-D6
Supported: replaces, path, timer
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, INFO, REFER, UPDATE, MESSAGE
Content-Type: application/sdp
Accept: application/sdp, application/dtmf-relay
Content-Length: 436
v=0
o=105 8001 8000 IN IP4 192.168.43.126
s=SIP Call
c=IN IP4 192.168.43.126
t=0 0
m=audio 5006 RTP/AVP 0 8 4 18 9 97 2 123 101
a=sendrecv
a=rtpmap:0 PCMU/8000
a=ptime:20
a=rtpmap:8 PCMA/8000
a=rtpmap:4 G723/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:9 G722/8000
a=rtpmap:97 iLBC/8000
a=fmtp:97 mode=30
a=rtpmap:2 G726-32/8000
a=rtpmap:123 opus/48000/2
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
<------------->
— (20 headers 20 lines) —
Sending to 192.168.43.126:56564 (no NAT)
Using INVITE request as basis request - [email protected]
Found peer ‘105’ for ‘105’ from 192.168.43.126:56564
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
Got SDP version 8000 and unique parts [105 8001 IN IP4 192.168.43.126]
Found RTP audio format 0
Found RTP audio format 8
Found RTP audio format 4
Found RTP audio format 18
Found RTP audio format 9
Found RTP audio format 97
Found RTP audio format 2
Found RTP audio format 123
Found RTP audio format 101
Found audio description format PCMU for ID 0
Found audio description format PCMA for ID 8
Found audio description format G723 for ID 4
Found audio description format G729 for ID 18
Found audio description format G722 for ID 9
Found audio description format iLBC for ID 97
Found audio description format G726-32 for ID 2
Found audio description format opus for ID 123
Found audio description format telephone-event for ID 101
Capabilities: us - (ulaw|alaw|gsm|g726|g723), peer - audio=(ulaw|g726|g723|alaw|g722|g729|ilbc|opus)/video=(nothing)/text=(nothing), combined - (ulaw|alaw|g726|g723)
Non-codec capabilities (dtmf): us - 0x1 (telephone-event|), peer - 0x1 (telephone-event|), combined - 0x1 (telephone-event|)
Peer audio RTP is at port 192.168.43.126:5006
Looking for ********* in from-internal (domain 192.168.43.15)
sip_route_dump: route/path hop: sip:[email protected]:56564
<— Transmitting (no NAT) to 192.168.43.126:56564 —>
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.43.126:56564;branch=z9hG4bK934855233;received=192.168.43.126;rport=56564
From: “105 Test” sip:[email protected];tag=784173465
To: sip:*********@192.168.43.15
Call-ID: [email protected]
CSeq: 21 INVITE
Server: FPBX-15.0.29(16.24.1)
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
Session-Expires: 1800;refresher=uas
Contact: sip:*********@192.168.43.15:5060
Content-Length: 0
<------------>
– Executing [[email protected]:1] Macro(“SIP/105-00000002”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
– Executing [[email protected]:1] Set(“SIP/105-00000002”, “TOUCH_MONITOR=1674840534.2”) in new stack
– Executing [[email protected]:2] Set(“SIP/105-00000002”, “CHANCONTEXT=”) in new stack
– Executing [[email protected]:3] Progress(“SIP/105-00000002”, “”) in new stack
Audio is at 12226
Adding codec ulaw to SDP
Adding codec alaw to SDP
Adding codec g726 to SDP
Adding codec g723 to SDP
Adding non-codec 0x1 (telephone-event) to SDP
<— Transmitting (no NAT) to 192.168.43.126:56564 —>
SIP/2.0 183 Session Progress
Via: SIP/2.0/UDP 192.168.43.126:56564;branch=z9hG4bK934855233;received=192.168.43.126;rport=56564
From: “105 Test” sip:[email protected];tag=784173465
To: sip:**********@192.168.43.15;tag=as4d478530
Call-ID: [email protected]
CSeq: 21 INVITE
Server: FPBX-15.0.29(16.24.1)
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
Session-Expires: 1800;refresher=uas
Contact: sip:***********@192.168.43.15:5060
Content-Type: application/sdp
Require: timer
Content-Length: 347
v=0
o=root 975704674 975704674 IN IP4 192.168.43.15
s=Asterisk PBX 16.30.0
c=IN IP4 192.168.43.15
t=0 0
m=audio 12226 RTP/AVP 0 8 2 4 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:4 G723/8000
a=fmtp:4 annexa=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
a=maxptime:150
a=sendrecv
<------------>
– Executing [[email protected]:4] Set(“SIP/105-00000002”, “CHANCONTEXT=”) in new stack
– Executing [[email protected]:5] Set(“SIP/105-00000002”, “CHANEXTENCONTEXT=105-00000002”) in new stack
– Executing [[email protected]:6] Set(“SIP/105-00000002”, “CHANEXTEN=105-00000002”) in new stack
– Executing [[email protected]:7] Set(“SIP/105-00000002”, “CALLERID(number)=105”) in new stack
– Executing [[email protected]:8] Set(“SIP/105-00000002”, “AMPUSER=105”) in new stack
– Executing [[email protected]:9] Set(“SIP/105-00000002”, “HOTDESCKCHAN=105-00000002”) in new stack
– Executing [[email protected]:10] Set(“SIP/105-00000002”, “HOTDESKEXTEN=105”) in new stack
– Executing [[email protected]:11] Set(“SIP/105-00000002”, “HOTDESKCALL=0”) in new stack
– Executing [[email protected]:12] ExecIf(“SIP/105-00000002”, “0?Set(HOTDESKCALL=1)”) in new stack
– Executing [[email protected]:13] ExecIf(“SIP/105-00000002”, “0?Set(CALLERID(name)=)”) in new stack
– Executing [[email protected]:14] GotoIf(“SIP/105-00000002”, “0?report”) in new stack
– Executing [[email protected]:15] ExecIf(“SIP/105-00000002”, “1?Set(REALCALLERIDNUM=105)”) in new stack
– Executing [[email protected]:16] Set(“SIP/105-00000002”, “AMPUSER=105”) in new stack
– Executing [[email protected]:17] GotoIf(“SIP/105-00000002”, “0?limit”) in new stack
– Executing [[email protected]:18] Set(“SIP/105-00000002”, “AMPUSERCIDNAME=Brent DeFranco”) in new stack
– Executing [[email protected]:19] ExecIf(“SIP/105-00000002”, “0?Set(__CIDMASQUERADING=TRUE)”) in new stack
– Executing [[email protected]:20] GotoIf(“SIP/105-00000002”, “0?report”) in new stack
– Executing [[email protected]:21] Set(“SIP/105-00000002”, “AMPUSERCID=105”) in new stack
– Executing [[email protected]:22] Set(“SIP/105-00000002”, “__DIAL_OPTIONS=Ttr”) in new stack
– Executing [[email protected]:23] Set(“SIP/105-00000002”, “CALLERID(all)=“Brent DeFranco” <105>”) in new stack
– Executing [[email protected]:24] ExecIf(“SIP/105-00000002”, “0?Set(CUSDIAL=)”) in new stack
– Executing [[email protected]:25] ExecIf(“SIP/105-00000002”, “0?Set(CALLERID(all)=“Brent DeFranco” <105>)”) in new stack
– Executing [[email protected]:26] GotoIf(“SIP/105-00000002”, “0?limit”) in new stack
– Executing [[email protected]:27] ExecIf(“SIP/105-00000002”, “1?Set(GROUP(concurrency_limit)=105)”) in new stack
– Executing [[email protected]:28] ExecIf(“SIP/105-00000002”, “0?Set(CHANNEL(language)=)”) in new stack
– Executing [[email protected]:29] NoOp(“SIP/105-00000002”, “Macro Depth is 1”) in new stack
– Executing [[email protected]:30] GotoIf(“SIP/105-00000002”, “1?report2:macroerror”) in new stack
– Goto (macro-user-callerid,s,31)
– Executing [[email protected]:31] GotoIf(“SIP/105-00000002”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,50)
– Executing [[email protected]id:50] Set(“SIP/105-00000002”, “CALLERID(number)=105”) in new stack
– Executing [[email protected]:51] Set(“SIP/105-00000002”, “CALLERID(name)=Brent DeFranco”) in new stack
– Executing [[email protected]:52] GotoIf(“SIP/105-00000002”, “0?cnum”) in new stack
– Executing [[email protected]:53] Set(“SIP/105-00000002”, “CDR(cnam)=Brent DeFranco”) in new stack
– Executing [[email protected]:54] Set(“SIP/105-00000002”, “CDR(cnum)=105”) in new stack
– Executing [[email protected]:55] Set(“SIP/105-00000002”, “CHANNEL(language)=en”) in new stack
– Executing [[email protected]:2] Gosub(“SIP/105-00000002”, “sub-record-check,s,1(out,5704410989,dontcare)”) in new stack
– Executing [[email protected]:1] GotoIf(“SIP/105-00000002”, “0?initialized”) in new stack
– Executing [[email protected]:2] Set(“SIP/105-00000002”, “__REC_STATUS=INITIALIZED”) in new stack
– Executing [[email protected]:3] Set(“SIP/105-00000002”, “NOW=1674840534”) in new stack
– Executing [[email protected]:4] Set(“SIP/105-00000002”, “__DAY=27”) in new stack
– Executing [[email protected]:5] Set(“SIP/105-00000002”, “__MONTH=01”) in new stack
– Executing [[email protected]:6] Set(“SIP/105-00000002”, “__YEAR=2023”) in new stack
– Executing [[email protected]:7] Set(“SIP/105-00000002”, “__TIMESTR=20230127-122854”) in new stack
– Executing [[email protected]:8] Set(“SIP/105-00000002”, “__FROMEXTEN=105”) in new stack
– Executing [[email protected]:9] Set(“SIP/105-00000002”, “__MON_FMT=wav”) in new stack
– Executing [[email protected]:10] NoOp(“SIP/105-00000002”, “Recordings initialized”) in new stack
– Executing [[email protected]:11] ExecIf(“SIP/105-00000002”, “0?Set(ARG3=dontcare)”) in new stack
– Executing [[email protected]:12] Set(“SIP/105-00000002”, “REC_POLICY_MODE_SAVE=”) in new stack
– Executing [[email protected]:13] ExecIf(“SIP/105-00000002”, “0?Set(REC_STATUS=NO)”) in new stack
– Executing [[email protected]:14] GotoIf(“SIP/105-00000002”, “3?checkaction”) in new stack
– Goto (sub-record-check,s,17)
– Executing [[email protected]:17] GotoIf(“SIP/105-00000002”, “1?sub-record-check,out,1”) in new stack
– Goto (sub-record-check,out,1)
– Executing [[email protected]:1] NoOp(“SIP/105-00000002”, “**Outbound Recording Check from 105 to **********”) in new stack
– Executing [[email protected]:2] Set(“SIP/105-00000002”, “RECMODE=dontcare”) in new stack
– Executing [[email protected]:3] ExecIf(“SIP/105-00000002”, “1?Goto(routewins)”) in new stack
– Goto (sub-record-check,out,7)
– Executing [[email protected]:7] Gosub(“SIP/105-00000002”, “recordcheck,1(dontcare,out,5704410989)”) in new stack
– Executing [[email protected]:1] NoOp(“SIP/105-00000002”, “Starting recording check against dontcare”) in new stack
– Executing [[email protected]:2] Goto(“SIP/105-00000002”, “dontcare”) in new stack
– Goto (sub-record-check,recordcheck,3)
– Executing [[email protected]:3] Return(“SIP/105-00000002”, “”) in new stack
– Executing [[email protected]:8] Return(“SIP/105-00000002”, “”) in new stack
– Executing [[email protected]:3] ExecIf(“SIP/105-00000002”, “0 ?Set(CDR(accountcode)=)”) in new stack
– Executing [[email protected]:4] GosubIf(“SIP/105-00000002”, “0?sub-diversion-header,s,1()”) in new stack
– Executing [[email protected]:5] Set(“SIP/105-00000002”, “_ROUTEID=4”) in new stack
– Executing [[email protected]:6] Set(“SIP/105-00000002”, “_ROUTENAME=Comcast”) in new stack
– Executing [[email protected]:7] Set(“SIP/105-00000002”, “MOHCLASS=sms”) in new stack
– Executing [[email protected]:8] ExecIf(“SIP/105-00000002”, “0?Set(TRUNKCIDOVERRIDE=<6109167000>)”) in new stack
– Executing [[email protected]:9] Set(“SIP/105-00000002”, “_CALLERIDNAMEINTERNAL=Brent DeFranco”) in new stack
– Executing [[email protected]:10] Set(“SIP/105-00000002”, “_CALLERIDNUMINTERNAL=105”) in new stack
– Executing [[email protected]:11] Set(“SIP/105-00000002”, “_EMAILNOTIFICATION=FALSE”) in new stack
– Executing [**********@from-internal:12] Set(“SIP/105-00000002”, “_NODEST=”) in new stack
– Executing [**********@from-internal:13] Macro(“SIP/105-00000002”, “dialout-trunk,4,5704410989,off”) in new stack
– Executing [[email protected]:1] Set(“SIP/105-00000002”, “DIAL_TRUNK=4”) in new stack
– Executing [[email protected]:2] ExecIf(“SIP/105-00000002”, “0?Set(DIAL_OPTIONS=tr)”) in new stack
– Executing [[email protected]:3] GosubIf(“SIP/105-00000002”, “0?sub-pincheck,s,1()”) in new stack
– Executing [[email protected]:4] ExecIf(“SIP/105-00000002”, “0?Set(CALLERID(num)=105)”) in new stack
– Executing [[email protected]:5] GotoIf(“SIP/105-00000002”, “0?disabletrunk,1”) in new stack
– Executing [[email protected]:6] Set(“SIP/105-00000002”, “DIAL_NUMBER=5704410989”) in new stack
– Executing [[email protected]:7] Set(“SIP/105-00000002”, “DIAL_TRUNK_OPTIONS=Ttr”) in new stack
– Executing [[email protected]:8] Set(“SIP/105-00000002”, “OUTBOUND_GROUP=OUT_4”) in new stack
– Executing [[email protected]:9] Set(“SIP/105-00000002”, “DIAL_TRUNK_OPTIONS=T”) in new stack
– Executing [[email protected]:10] GotoIf(“SIP/105-00000002”, “1?nomax”) in new stack
– Goto (macro-dialout-trunk,s,12)
– Executing [[email protected]:12] GotoIf(“SIP/105-00000002”, “0?skipoutcid”) in new stack
– Executing [[email protected]:13] Macro(“SIP/105-00000002”, “outbound-callerid,4”) in new stack
– Executing [[email protected]:1] NoOp(“SIP/105-00000002”, “105”) in new stack
– Executing [[email protected]:2] NoOp(“SIP/105-00000002”, “”) in new stack
– Executing [[email protected]:3] NoOp(“SIP/105-00000002”, “off”) in new stack
– Executing [[email protected]:4] ExecIf(“SIP/105-00000002”, “0?Set(CALLERPRES(name-pres)=)”) in new stack
– Executing [[email protected]:5] ExecIf(“SIP/105-00000002”, “0?Set(CALLERPRES(num-pres)=)”) in new stack
– Executing [[email protected]:6] Set(“SIP/105-00000002”, “HOTDESCKCHAN=105-00000002”) in new stack
– Executing [[email protected]:7] Set(“SIP/105-00000002”, “HOTDESKEXTEN=105”) in new stack
– Executing [[email protected]:8] Set(“SIP/105-00000002”, “HOTDESKCALL=0”) in new stack
– Executing [[email protected]:9] ExecIf(“SIP/105-00000002”, “0?Set(HOTDESKCALL=1)”) in new stack
– Executing [[email protected]:10] ExecIf(“SIP/105-00000002”, “0?Set(CALLERID(name)=)”) in new stack
– Executing [[email protected]:11] Set(“SIP/105-00000002”, “ALLOWTHISROUTE=NO”) in new stack
– Executing [[email protected]:12] ExecIf(“SIP/105-00000002”, “0?Set(ALLOWTHISROUTE=YES)”) in new stack
– Executing [[email protected]:13] ExecIf(“SIP/105-00000002”, “0?Hangup()”) in new stack
– Executing [[email protected]:14] ExecIf(“SIP/105-00000002”, “0?Set(REALCALLERIDNUM=105)”) in new stack
– Executing [[email protected]:15] ExecIf(“SIP/105-00000002”, “0?Set(AMPUSER=105)”) in new stack
– Executing [[email protected]:16] GotoIf(“SIP/105-00000002”, “1?normcid”) in new stack
– Goto (macro-outbound-callerid,s,20)
– Executing [[email protected]:20] Set(“SIP/105-00000002”, “USEROUTCID=6109167000”) in new stack
– Executing [[email protected]:21] Set(“SIP/105-00000002”, “EMERGENCYCID=”) in new stack
– Executing [[email protected]:22] ExecIf(“SIP/105-00000002”, “0?Set(SCDEXT=YES)”) in new stack
– Executing [[email protected]:23] ExecIf(“SIP/105-00000002”, “0?Set(EMERGENCYCID=)”) in new stack
– Executing [[email protected]:24] ExecIf(“SIP/105-00000002”, “0?Set(CALLERID(name)=)”) in new stack
– Executing [[email protected]:25] ExecIf(“SIP/105-00000002”, “0?Set(EMERGENCYCID=)”) in new stack
– Executing [[email protected]:26] Set(“SIP/105-00000002”, “TRUNKOUTCID=<6109167000>”) in new stack
– Executing [[email protected]:27] GotoIf(“SIP/105-00000002”, “1?trunkcid”) in new stack
– Goto (macro-outbound-callerid,s,33)
– Executing [[email protected]:33] ExecIf(“SIP/105-00000002”, “1?Set(CALLERID(all)=<6109167000>)”) in new stack
– Executing [[email protected]:34] ExecIf(“SIP/105-00000002”, “1?Set(CALLERID(all)=6109167000)”) in new stack
– Executing [[email protected]:35] ExecIf(“SIP/105-00000002”, “0?Set(CALLERID(all)=)”) in new stack
– Executing [[email protected]:36] ExecIf(“SIP/105-00000002”, “0?Set(CALLERID(all)=105)”) in new stack
– Executing [[email protected]:37] ExecIf(“SIP/105-00000002”, “0?Set(CALLERID(all)=105)”) in new stack
– Executing [[email protected]:38] Set(“SIP/105-00000002”, “TIOHIDE=no”) in new stack
– Executing [[email protected]:39] ExecIf(“SIP/105-00000002”, “0?Set(CALLERPRES(name-pres)=prohib_passed_screen)”) in new stack
– Executing [[email protected]:40] ExecIf(“SIP/105-00000002”, “0?Set(CALLERPRES(num-pres)=prohib_passed_screen)”) in new stack
– Executing [[email protected]lerid:41] ExecIf(“SIP/105-00000002”, “0?Set(CALLERPRES(name-pres)=prohib_passed_screen)”) in new stack
– Executing [[email protected]:42] ExecIf(“SIP/105-00000002”, “0?Set(CALLERPRES(num-pres)=prohib_passed_screen)”) in new stack
– Executing [[email protected]:43] Set(“SIP/105-00000002”, “CDR(outbound_cnum)=6109167000”) in new stack
– Executing [[email protected]:44] Set(“SIP/105-00000002”, “CDR(outbound_cnam)=”) in new stack
– Executing [[email protected]:14] GosubIf(“SIP/105-00000002”, “0?sub-flp-4,s,1()”) in new stack
– Executing [[email protected]:15] Set(“SIP/105-00000002”, “OUTNUM=******”) in new stack
– Executing [[email protected]:16] Set(“SIP/105-00000002”, “custom=SIP/Comcast”) in new stack
– Executing [[email protected]:17] ExecIf(“SIP/105-00000002”, “1?Set(DIAL_TRUNK_OPTIONS=M(setmusic^sms)T)”) in new stack
– Executing [[email protected]:18] ExecIf(“SIP/105-00000002”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^sms)TM(confirm))”) in new stack
– Executing [[email protected]:19] Macro(“SIP/105-00000002”, “dialout-trunk-predial-hook,”) in new stack
– Executing [[email protected]:1] MacroExit(“SIP/105-00000002”, “”) in new stack
– Executing [[email protected]:20] GotoIf(“SIP/105-00000002”, “0?skipcrm”) in new stack
– Executing [[email protected]:21] Set(“SIP/105-00000002”, “__CRM_DIRECTION=OUTBOUND”) in new stack
– Executing [[email protected]:22] Set(“SIP/105-00000002”, “__CRM_DESTINATION=************”) in new stack
– Executing [[email protected]:23] Set(“SIP/105-00000002”, “__CRM_SOURCE=105”) in new stack
– Executing [[email protected]:24] AGI(“SIP/105-00000002”, “agi://127.0.0.1/sangomacrm.agi”) in new stack
– <SIP/105-00000002>AGI Script agi://127.0.0.1/sangomacrm.agi completed, returning 0
– Executing [[email protected]:25] Set(“SIP/105-00000002”, “CHANNEL(hangup_handler_push)=crm-hangup,s,1”) in new stack
– Executing [[email protected]:26] NoOp(“SIP/105-00000002”, “CRM Finished”) in new stack
– Executing [[email protected]:27] GotoIf(“SIP/105-00000002”, “0?bypass,1”) in new stack
– Executing [[email protected]:28] ExecIf(“SIP/105-00000002”, “1?Set(CONNECTEDLINE(num,i)=*****)”) in new stack
– Executing [[email protected]:29] ExecIf(“SIP/105-00000002”, “1?Set(CONNECTEDLINE(name,i)=CID:6109167000)”) in new stack
– Executing [[email protected]:30] ExecIf(“SIP/105-00000002”, “0?Set(CONNECTEDLINE(name,i)=CID:(Hidden)6109167000)”) in new stack
– Executing [[email protected]:31] GotoIf(“SIP/105-00000002”, “0?customtrunk”) in new stack
– Executing [[email protected]:32] ExecIf(“SIP/105-00000002”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^sms))”) in new stack
– Executing [[email protected]:33] Set(“SIP/105-00000002”, “HASH(__SIPHEADERS,Alert-Info)=unset”) in new stack
– Executing [[email protected]:34] Dial(“SIP/105-00000002”, “SIP/Comcast/**********,300,M(setmusic^sms)Tb(func-apply-sipheaders^s^1,(4))U(sub-send-obroute-email^^*^4^1674840534^^6109167000)”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– SIP/Comcast-00000003 Internal Gosub(func-apply-sipheaders,s,1(4)) start
– Executing [[email protected]:1] ExecIf(“SIP/Comcast-00000003”, “0?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)”) in new stack
– Executing [[email protected]:2] NoOp(“SIP/Comcast-00000003”, “Applying SIP Headers to channel SIP/Comcast-00000003”) in new stack
– Executing [[email protected]:3] Set(“SIP/Comcast-00000003”, “TECH=SIP”) in new stack
– Executing [[email protected]:4] Set(“SIP/Comcast-00000003”, “SIPHEADERKEYS=Alert-Info”) in new stack
– Executing [[email protected]:5] While(“SIP/Comcast-00000003”, “1”) in new stack
– Executing [[email protected]:6] Set(“SIP/Comcast-00000003”, “sipheader=unset”) in new stack
– Executing [[email protected]:7] ExecIf(“SIP/Comcast-00000003”, “1?SIPRemoveHeader(Alert-Info:)”) in new stack
– Executing [[email protected]:8] ExecIf(“SIP/Comcast-00000003”, “0?Set(PJSIP_HEADER(remove,Alert-Info)=)”) in new stack
– Executing [[email protected]:9] ExecIf(“SIP/Comcast-00000003”, “0?Set(sipheader=http://127.0.0.1;info=unset)”) in new stack
– Executing [[email protected]:10] ExecIf(“SIP/Comcast-00000003”, “0?Set(sipheader=http://127.0.0.1unset)”) in new stack
– Executing [[email protected]:11] ExecIf(“SIP/Comcast-00000003”, “0?SIPAddHeader(Alert-Info:unset)”) in new stack
– Executing [[email protected]:12] ExecIf(“SIP/Comcast-00000003”, “0?Set(PJSIP_HEADER(add,Alert-Info)=unset)”) in new stack
– Executing [[email protected]:13] EndWhile(“SIP/Comcast-00000003”, “”) in new stack
– Executing [[email protected]:5] While(“SIP/Comcast-00000003”, “0”) in new stack
– Executing [[email protected]:14] Return(“SIP/Comcast-00000003”, “”) in new stack
== Spawn extension (from-trunk-sip-Comcast, 5704410989, 1) exited non-zero on ‘SIP/Comcast-00000003’
– SIP/Comcast-00000003 Internal Gosub(func-apply-sipheaders,s,1(4)) complete GOSUB_RETVAL=
Audio is at 11716
Adding codec ulaw to SDP
Adding codec alaw to SDP
Adding codec gsm to SDP
Adding codec g726 to SDP
Adding non-codec 0x1 (telephone-event) to SDP
Reliably Transmitting (NAT) to 192.168.43.20:5060:
INVITE sip:*********@192.168.43.20 SIP/2.0
Via: SIP/2.0/UDP 192.168.43.15:5060;branch=z9hG4bK3d8537ef;rport
Max-Forwards: 70
From: sip:[email protected];tag=as27b286a8
To: sip:*********@192.168.43.20
Contact: sip:[email protected]:5060
Call-ID: [email protected]:5060
CSeq: 102 INVITE
User-Agent: FPBX-15.0.29(16.24.1)
Date: Fri, 27 Jan 2023 17:28:55 GMT
Session-Expires: 1920
Min-SE: 930
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
Content-Type: application/sdp
Content-Length: 332
v=0
– Called SIP/Comcast/***********
<— SIP read from UDP:192.168.43.20:5060 —>
SIP/2.0 404 Not Found
From: sip:[email protected];tag=as27b286a8
To: sip:**********@192.168.43.20;tag=7d11be0-7f000001-13c4-af997-233549b9-af997
Call-ID: [email protected]:5060
CSeq: 102 INVITE
Via: SIP/2.0/UDP 192.168.43.15:5060;rport=5060;branch=z9hG4bK3d8537ef
Supported: replaces
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, PRACK, REFER, REGISTER, OPTIONS
User-Agent: ADTRAN_NetVanta_3430/R13.9.0.HB.V (s001992d031ff)
Content-Length: 0
<------------->
— (10 headers 0 lines) —
Transmitting (NAT) to 192.168.43.20:5060:
ACK sip:*********@192.168.43.20 SIP/2.0
Via: SIP/2.0/UDP 192.168.43.15:5060;branch=z9hG4bK3d8537ef;rport
Max-Forwards: 70
From: sip:[email protected];tag=as27b286a8
To: sip:**********@192.168.43.20;tag=7d11be0-7f000001-13c4-af997-233549b9-af997
Contact: sip:[email protected]:5060
Call-ID: [email protected]:5060
CSeq: 102 ACK
User-Agent: FPBX-15.0.29(16.24.1)
Content-Length: 0
Scheduling destruction of SIP dialog ‘[email protected]:5060’ in 32000 ms (Method: INVITE)
== Everyone is busy/congested at this time (1:0/0/1)
– Executing [[email protected]:35] NoOp(“SIP/105-00000002”, “Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 1”) in new stack
– Executing [[email protected]:36] GotoIf(“SIP/105-00000002”, “0?continue,1:s-CHANUNAVAIL,1”) in new stack
– Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
– Executing [[email protected]:1] Set(“SIP/105-00000002”, “RC=1”) in new stack
– Executing [[email protected]:2] Goto(“SIP/105-00000002”, “1,1”) in new stack
– Goto (macro-dialout-trunk,1,1)
– Executing [[email protected]:1] Goto(“SIP/105-00000002”, “s-INVALIDNMBR,1”) in new stack
– Goto (macro-dialout-trunk,s-INVALIDNMBR,1)
– Executing [[email protected]:1] NoOp(“SIP/105-00000002”, “Dial failed due to trunk reporting Address Incomplete - giving up”) in new stack