Zulu Node is not running

Someone from support will have to help you further. Unfortunately your system is blocking the install.

Ok I finally figured it out. You had to have never installed zulu before you got the license or you had it disabled.

fwconsole upgrade zulu --edge
fwconsole start zulu

Zulu now at 13.0.49.2 and enabled.
Zulu Daemon still showing not running on the Dashboard.

[root@freepbx-a ~]# fwconsole start zulu
Running FreePBX startup…
Taking too long? Customize the chown command, See http://wiki.freepbx.org/display/FOP/FreePBX+Chown+Conf
Setting Permissions…
Collecting Files…Done
4414/4414 [============================] 100%
Finished setting permissions
Unable to run Pre-Asterisk hooks, because Asterisk is already running on PID 6543 and has been running for 2 weeks, 5 days, 23 hours, 52 minutes, 48 seconds
[root@freepbx-a ~]#

Go to advanced settings and enable Zulu. You disabled it at some point in the past.

I have made this more clear in Zulu 13.0.49.3

1 Like

FWIW, I have been reading these posts all evening trying to fix a new install.

Server is brand new (have also tried on multiple others). Zulu would not start on any of them. Eventually, I noticed that running fwconsole start zulu always redlined:

“PJSIP Transports for WS and WSS have enabled in Asterisk SIP Settings under the Chan PJSIP Settings tab. Please restart Asterisk”

Odd that it would do this EVERY time. So I took a look at the advanced settings in the GUI, and found they were still disabled. Enabling them in the GUI resolved the problem.

I was able to reproduce this issue on every system I tried. Hopefully this helps someone.

Detailed on this wiki page:
https://wiki.freepbx.org/display/ZU/Zulu+3+Server+Installation