Hey ,!
i am unable to make toll free calls from my free pbx inbound and other outbound calls work perfectly .
here is some of the logs
[2014-11-24 11:44:37] VERBOSE[28000][C-000000d9] netsock2.c: == Using SIP RTP TOS bits 184
[2014-11-24 11:44:37] VERBOSE[28000][C-000000d9] netsock2.c: == Using SIP RTP CoS mark 5
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [018004250088@from-internal:1] Macro(“SIP/800-000000d7”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/800-000000d7”, “TOUCH_MONITOR=1416809677.445”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/800-000000d7”, “AMPUSER=800”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/800-000000d7”, “0?report”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/800-000000d7”, “1?Set(REALCALLERIDNUM=800)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/800-000000d7”, “AMPUSER=800”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/800-000000d7”, “0?limit”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/800-000000d7”, “AMPUSERCIDNAME=Airtel pilot”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/800-000000d7”, “0?report”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/800-000000d7”, “AMPUSERCID=800”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/800-000000d7”, “__DIAL_OPTIONS=Ttr”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/800-000000d7”, “CALLERID(all)=“Airtel pilot” <800>”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/800-000000d7”, “0?limit”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/800-000000d7”, “1?Set(GROUP(concurrency_limit)=800)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:14] GosubIf(“SIP/800-000000d7”, “7?sub-ccss,s,1(from-internal,018004250088)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/800-000000d7”, “0?Return()”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/800-000000d7”, “CCSS_SETUP=TRUE”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/800-000000d7”, “0?monitor_config,1(from-internal,018004250088):monitor_default,1(from-internal,018004250088)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/800-000000d7”, “0?is_exten”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/800-000000d7”, “”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/800-000000d7”, “FALSE”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:15] ExecIf(“SIP/800-000000d7”, “0?Set(CHANNEL(language)=)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:16] GotoIf(“SIP/800-000000d7”, “1?continue”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Goto (macro-user-callerid,s,29)
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:29] Set(“SIP/800-000000d7”, “CALLERID(number)=800”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/800-000000d7”, “CALLERID(name)=Airtel pilot”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:31] Set(“SIP/800-000000d7”, “CDR(cnum)=800”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:32] Set(“SIP/800-000000d7”, “CDR(cnam)=Airtel pilot”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-user-callerid:33] Set(“SIP/800-000000d7”, “CHANNEL(language)=en”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [018004250088@from-internal:2] Set(“SIP/800-000000d7”, “MOHCLASS=default”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [018004250088@from-internal:3] Set(“SIP/800-000000d7”, “_NODEST=”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [018004250088@from-internal:4] Gosub(“SIP/800-000000d7”, “sub-record-check,s,1(out,018004250088,)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:1] Set(“SIP/800-000000d7”, “REC_POLICY_MODE_SAVE=”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:2] GotoIf(“SIP/800-000000d7”, “1?check”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Goto (sub-record-check,s,7)
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:7] Set(“SIP/800-000000d7”, “__MON_FMT=wav”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:8] GotoIf(“SIP/800-000000d7”, “1?next”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Goto (sub-record-check,s,11)
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:11] ExecIf(“SIP/800-000000d7”, “0?Return()”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:12] ExecIf(“SIP/800-000000d7”, “0?Set(__REC_POLICY_MODE=)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:13] GotoIf(“SIP/800-000000d7”, “0?out,1”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:14] Set(“SIP/800-000000d7”, “__REC_STATUS=INITIALIZED”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:15] Set(“SIP/800-000000d7”, “NOW=1416809677”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:16] Set(“SIP/800-000000d7”, “__DAY=24”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:17] Set(“SIP/800-000000d7”, “__MONTH=11”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:18] Set(“SIP/800-000000d7”, “__YEAR=2014”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:19] Set(“SIP/800-000000d7”, “__TIMESTR=20141124-114437”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:20] Set(“SIP/800-000000d7”, “__FROMEXTEN=800”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:21] Set(“SIP/800-000000d7”, “__CALLFILENAME=out-018004250088-800-20141124-114437-1416809677.445”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-record-check:22] Goto(“SIP/800-000000d7”, “out,1”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Goto (sub-record-check,out,1)
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [out@sub-record-check:1] ExecIf(“SIP/800-000000d7”, “1?Set(__REC_POLICY_MODE=dontcare)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [out@sub-record-check:2] GosubIf(“SIP/800-000000d7”, “0?record,1(exten,018004250088,800)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [out@sub-record-check:3] Return(“SIP/800-000000d7”, “”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [018004250088@from-internal:5] Macro(“SIP/800-000000d7”, “dialout-trunk,1,18004250088,off”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:1] Set(“SIP/800-000000d7”, “DIAL_TRUNK=1”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:2] GosubIf(“SIP/800-000000d7”, “0?sub-pincheck,s,1()”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:3] GotoIf(“SIP/800-000000d7”, “0?disabletrunk,1”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:4] Set(“SIP/800-000000d7”, “DIAL_NUMBER=18004250088”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:5] Set(“SIP/800-000000d7”, “DIAL_TRUNK_OPTIONS=Ttr”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:6] Set(“SIP/800-000000d7”, “OUTBOUND_GROUP=OUT_1”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:7] GotoIf(“SIP/800-000000d7”, “1?nomax”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Goto (macro-dialout-trunk,s,9)
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:9] GotoIf(“SIP/800-000000d7”, “0?skipoutcid”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:10] Set(“SIP/800-000000d7”, “DIAL_TRUNK_OPTIONS=Tt”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:11] Macro(“SIP/800-000000d7”, “outbound-callerid,1”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outbound-callerid:1] ExecIf(“SIP/800-000000d7”, “0?Set(CALLERPRES()=)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outbound-callerid:2] ExecIf(“SIP/800-000000d7”, “0?Set(REALCALLERIDNUM=800)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outbound-callerid:3] GotoIf(“SIP/800-000000d7”, “1?normcid”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Goto (macro-outbound-callerid,s,6)
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outbound-callerid:6] Set(“SIP/800-000000d7”, “USEROUTCID=8040485800”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outbound-callerid:7] Set(“SIP/800-000000d7”, “EMERGENCYCID=”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outbound-callerid:8] Set(“SIP/800-000000d7”, “TRUNKOUTCID=”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outbound-callerid:9] GotoIf(“SIP/800-000000d7”, “1?trunkcid”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Goto (macro-outbound-callerid,s,14)
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outbound-callerid:14] ExecIf(“SIP/800-000000d7”, “0?Set(CALLERID(all)=)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outbound-callerid:15] ExecIf(“SIP/800-000000d7”, “1?Set(CALLERID(all)=8040485800)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outbound-callerid:16] ExecIf(“SIP/800-000000d7”, “0?Set(CALLERID(all)=)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outbound-callerid:17] ExecIf(“SIP/800-000000d7”, “0?Set(CALLERPRES()=prohib_passed_screen)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outbound-callerid:18] Set(“SIP/800-000000d7”, “CDR(outbound_cnum)=8040485800”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outbound-callerid:19] Set(“SIP/800-000000d7”, “CDR(outbound_cnam)=”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:12] GosubIf(“SIP/800-000000d7”, “1?sub-flp-1,s,1()”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-flp-1:1] ExecIf(“SIP/800-000000d7”, “0?Set(TARGET_FLP_1=8004250088)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-flp-1:2] GotoIf(“SIP/800-000000d7”, “0?match”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@sub-flp-1:3] Return(“SIP/800-000000d7”, “”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:13] Set(“SIP/800-000000d7”, “OUTNUM=18004250088”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:14] Set(“SIP/800-000000d7”, “custom=DAHDI/G0”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:15] ExecIf(“SIP/800-000000d7”, “0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)Tt)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:16] ExecIf(“SIP/800-000000d7”, “0?Set(DIAL_TRUNK_OPTIONS=TtM(confirm))”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:17] Macro(“SIP/800-000000d7”, “dialout-trunk-predial-hook,”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit(“SIP/800-000000d7”, “”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:18] GotoIf(“SIP/800-000000d7”, “0?bypass,1”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:19] ExecIf(“SIP/800-000000d7”, “1?Set(CONNECTEDLINE(num,i)=18004250088)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:20] ExecIf(“SIP/800-000000d7”, “1?Set(CONNECTEDLINE(name,i)=CID:8040485800)”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:21] GotoIf(“SIP/800-000000d7”, “0?customtrunk”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:22] Dial(“SIP/800-000000d7”, “DAHDI/G0/18004250088,300,Tt”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] sig_pri.c: – Requested transfer capability: 0x00 - SPEECH
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] app_dial.c: – Called DAHDI/G0/18004250088
[2014-11-24 11:44:37] VERBOSE[27984][C-000000d9] sig_pri.c: – Span 1: Channel 0/15 got hangup request, cause 3
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] chan_dahdi.c: – Hungup ‘DAHDI/i1/18004250088-af’
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] app_dial.c: == Everyone is busy/congested at this time (1:0/0/1)
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:23] NoOp(“SIP/800-000000d7”, “Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 3”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-dialout-trunk:24] GotoIf(“SIP/800-000000d7”, “0?continue,1:s-CHANUNAVAIL,1”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] Set(“SIP/800-000000d7”, “RC=3”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s-CHANUNAVAIL@macro-dialout-trunk:2] Goto(“SIP/800-000000d7”, “3,1”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Goto (macro-dialout-trunk,3,1)
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [3@macro-dialout-trunk:1] Goto(“SIP/800-000000d7”, “continue,1”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Goto (macro-dialout-trunk,continue,1)
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [continue@macro-dialout-trunk:1] NoOp(“SIP/800-000000d7”, “TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 3 - failing through to other trunks”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [continue@macro-dialout-trunk:2] Set(“SIP/800-000000d7”, “CALLERID(number)=800”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [018004250088@from-internal:6] Macro(“SIP/800-000000d7”, “outisbusy,”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outisbusy:1] Progress(“SIP/800-000000d7”, “”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outisbusy:2] GotoIf(“SIP/800-000000d7”, “0?emergency,1”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outisbusy:3] GotoIf(“SIP/800-000000d7”, “0?intracompany,1”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outisbusy:4] Playback(“SIP/800-000000d7”, “all-circuits-busy-now&pls-try-call-later, noanswer”) in new stack
[2014-11-24 11:44:37] VERBOSE[20637][C-000000d9] file.c: – <SIP/800-000000d7> Playing ‘all-circuits-busy-now.ulaw’ (language ‘en’)
[2014-11-24 11:44:39] VERBOSE[20637][C-000000d9] file.c: – <SIP/800-000000d7> Playing ‘pls-try-call-later.ulaw’ (language ‘en’)
[2014-11-24 11:44:39] NOTICE[20637][C-000000d9] res_rtp_asterisk.c: Unknown RTP codec 126 received from ‘192.168.3.222:54866’
[2014-11-24 11:44:41] VERBOSE[20637][C-000000d9] pbx.c: – Executing [s@macro-outisbusy:5] Congestion(“SIP/800-000000d7”, “20”) in new stack
[2014-11-24 11:44:41] WARNING[20637][C-000000d9] channel.c: Prodding channel ‘SIP/800-000000d7’ failed
[2014-11-24 11:44:41] VERBOSE[20637][C-000000d9] app_macro.c: == Spawn extension (macro-outisbusy, s, 5) exited non-zero on ‘SIP/800-000000d7’ in macro ‘outisbusy’
[2014-11-24 11:44:41] VERBOSE[20637][C-000000d9] pbx.c: == Spawn extension (from-internal, 018004250088, 6) exited non-zero on ‘SIP/800-000000d7’
[2014-11-24 11:44:41] VERBOSE[20637][C-000000d9] pbx.c: – Executing [h@from-internal:1] Hangup(“SIP/800-000000d7”, “”) in new stack
[2014-11-24 11:44:41] VERBOSE[20637][C-000000d9] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/800-000000d7’
any help for the post is highly appreciable