Okay did some resurch as to configuring this phone. The Files are inside the /home/ip500 directory. I can ftp into the ftp directory with a ftp client.
I downloaded Polycom UC Software 5.4.0_RF_release sig split.zip and unzipped and placed in /home/ip500. Deleted all the ld files except the 3111-46161-001.ld file that matches the assembly status of the VVX 310.
I followed the instructions in http://support.polycom.com/global/documents/support/setup_maintenance/products/voice/How_to_Provision.pdf
Modified sip-basic.cfg and reg-basic.cfg 0004F2821BC4.cfg Files
copy of 0004F2821BC4.cfg Files
APP_FILE_PATH=“311-46161-001.sip.ld”
CONFIG_FILES=“reg-basic.cfg sip-basic.cfg”
All other lines left as default
sip-basic.cfg info is as follows:
reg.1.address 192.168.0.103 ← IP of phone.
reg.1.auth.password ip5003953
reg.1.auto.userid ip500 ← using old user/password from old days reg.1.user.label 200
reg.1.user.extension 200
All other lines left as default
sip-basic.cfg
voIpProt.server.1.address=“192.168.0.100” <–freepbx ip address
voIpProt.server.1.port=“0”
All other lines left as default
At this point, I edited the phones configuration:
advanced >admin settings > network configuation > provision server
server address > 192.168.0.100
server user > ip5003953
Ethernet Menu
DHCP > disabled
IP address > 192.168.0.103
Subnetmask > 255.255.255.0
IP GW > 192.168.0.1
Call Server 1
address > 192.168.0.100
port > 5060
all other lines default
