I have installed a new FreePBX system and everything is working great, excepted for softphones. I have multiple hard phones (Cisco 7940) working PERFECTLY! Audio quality is good, functions works greats! But when I try to use a softphone for when I’m away from home, I get audio problems… The quality of the audio is great, but it stops… Like if the bandwidth was not good enough! (But the bandwidth is good enough! And I tried on the same network as the server and I get the same exact problem). Any idea of what it could be? I’m using X-Lite as a softphone but I tried on multiple other softphones and I get the same results…
I tried on a MacBook Pro i7 8GB and on a Lenovo Y50 i7-4720, 16GB of RAM, same problem!
The network is a based on an Asus RT-N16, Server-Router is 1GB/s and Computer-Router is 100MB/s (pass through a Cisco 7940 in switch mode). I also tried the computer in wifi mode, and on an external network using NAT.
For additional information, I did a few more tests and I’m not missing parts of the message. It’s juste waiting, as if it was “loading” or buffering the sounds packet… It basically add pauses between words…