I would like to park and retrieve directly from slots, I don’t want to waste a third line appearance as the “Call Park” button and then have 2 other line appearances for the “Slots”
I realize I could have a Park softkey, but again, why the redundancy? Can I simply be on a call, press the sd+blf line key of Slot 1, then retrieve at another phone by pressing Slot 1?
Is this still the case? I have freepbx 12.something and Asterisk 13 and I still am not able to park directly to a slot. I get “I’m sorry there is currently no call parked on that extension.” I’ve tried attended transfer and blind transfer and both produce the same message. Has something changed to make this no longer usable? Or do I have to go to some setting somewhere and turn it on?
Specifically I have Asterisk 13 and Freepbx 12.0.76.2.
Here are the links to the files. First one is when done with ##71#. Second is done by hitting the line key on the phone which is configured as a BLF with the commercial endpoint manager. This was done on a Polycom VVX 410 phone. The ## transfer actually terminated the call.
I just tried it with a Grandstream GXP 2140 and had the same results. The ## transfer to 71 hung up the call and using the programmed linekey resulted in “I’m sorry there is no call parked on that extension” The line key is programmed as a BLF. I had to hit the transfer button and then the linekey.
Did you ever get this resolved? I’m seeing the exact same issue on multiple FreePBX boxes. These have all been updated to the latest FreePBX distro and Asterisk 13.