Module admin GUI (Cannot connect to online repository)

[Marbled (Nicolas Riendeau)]

Hi!

@cynjut

Do you have 8.8.8.8 listed as one of the server’s DNS servers?

Or any other DNS you know is accessible from your PBX…

(8.8.8.8 is a Google DNS many people use but it’s not mandatory to use that one…)

That said, you might want to have a look at this thread:

DNS not working, Can't detect External IP

I have a system running FreePBX 13 and Asterisk 13. The system can’t resolve urls, if you try to put in a url for a sip trunk asterisk chokes and dies. If I press the detect external ip button, it can not retrieve that information. If I put in an IP for the sip trunks everything is golden call wise but I can’t update my modules without dns. I’m sitting behind a CISCO router/firewall. The system is on a 10.0.10.0/24 and the data is on a 10.0.20.0/24. My DNS in System Admin Pro is 127.0.0.1,…

and especially this post (if you are in the same situation as me):

DNS not working, Can't detect External IP

My own PBX is in a (real) DMZ and I have rules in my firewall (not the FreePBX one, the one which protects my whole network) to allow: Outbound SMTP (port 25 TCP) Outbound SIP traffic (the usual SIP ports + all UDP for RTP traffic) Outbound HTTP (port 80 TCP) Outbound HTTPS (port 443 TCP) Outbound NTP (port 123 UDP) Outbound GPG (port 11371 TCP) and of course DNS (UDP and TCP port 53) but this is handled a little differently than the rest… SMTP is for the email notifications, NTP for tim…

Good luck and have a nice day!

Happy New Year!

Nick