Intercom/Page Group Not Working

I can page an extension *80122, and I can intercom with extension 122 fine. But when I attempt to page/intercom a group I created the phone just hangs up. There is no record of my attempted page in the CDR either. Thoughts?

Here are the log files when i attempt to dial 900 (page group number)

[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [900@from-internal:1] Goto(“SIP/121-00000d13”, “from-internal-original,900,1”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Goto (from-internal-original,900,1)
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [900@from-internal-original:1] Macro(“SIP/121-00000d13”, “user-callerid,LIMIT”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:1] Set(“SIP/121-00000d13”, “TOUCH_MONITOR=1448471763.108570”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:2] Set(“SIP/121-00000d13”, “AMPUSER=121”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:3] GotoIf(“SIP/121-00000d13”, “0?report”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:4] ExecIf(“SIP/121-00000d13”, “1?Set(REALCALLERIDNUM=121)”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:5] Set(“SIP/121-00000d13”, “AMPUSER=121”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:6] GotoIf(“SIP/121-00000d13”, “0?limit”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:7] Set(“SIP/121-00000d13”, “AMPUSERCIDNAME=Mark”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:8] GotoIf(“SIP/121-00000d13”, “0?report”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:9] Set(“SIP/121-00000d13”, “AMPUSERCID=121”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:10] Set(“SIP/121-00000d13”, “__DIAL_OPTIONS=tr”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:11] Set(“SIP/121-00000d13”, “CALLERID(all)=“Mark” <121>”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:12] GotoIf(“SIP/121-00000d13”, “0?limit”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:13] ExecIf(“SIP/121-00000d13”, “1?Set(GROUP(concurrency_limit)=121)”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:14] GosubIf(“SIP/121-00000d13”, “7?sub-ccss,s,1(from-internal-original,900)”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@sub-ccss:1] ExecIf(“SIP/121-00000d13”, “0?Return()”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@sub-ccss:2] Set(“SIP/121-00000d13”, “CCSS_SETUP=TRUE”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@sub-ccss:3] GosubIf(“SIP/121-00000d13”, “0?monitor_config,1(from-internal-original,900):monitor_default,1(from-internal-original,900)”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [monitor_default@sub-ccss:1] GotoIf(“SIP/121-00000d13”, “0?is_exten”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [monitor_default@sub-ccss:2] StackPop(“SIP/121-00000d13”, “”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [monitor_default@sub-ccss:3] Return(“SIP/121-00000d13”, “FALSE”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:15] ExecIf(“SIP/121-00000d13”, “0?Set(CHANNEL(language)=)”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:16] GotoIf(“SIP/121-00000d13”, “1?continue”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Goto (macro-user-callerid,s,30)
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:30] Set(“SIP/121-00000d13”, “CALLERID(number)=121”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:31] Set(“SIP/121-00000d13”, “CALLERID(name)=Mark”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:32] Set(“SIP/121-00000d13”, “CDR(cnum)=121”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:33] Set(“SIP/121-00000d13”, “CDR(cnam)=Mark”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:34] Set(“SIP/121-00000d13”, “CHANNEL(language)=en”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:35] ExecIf(“SIP/121-00000d13”, “0?Set(CALLERID(name)=)”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [s@macro-user-callerid:36] GosubIf(“SIP/121-00000d13”, “0?app-check-classofservce,s,1()”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [900@from-internal-original:2] Set(“SIP/121-00000d13”, “ROUTEUSER=121”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [900@from-internal-original:3] GotoIf(“SIP/121-00000d13”, “1?notblind”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Goto (from-internal-original,900,6)
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [900@from-internal-original:6] GotoIf(“SIP/121-00000d13”, “1?restrictedroute-83f1807ba6c14eef109c67d41a45063c,900,2:outbound-allroutes,900,2”) in new stack
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Goto (restrictedroute-83f1807ba6c14eef109c67d41a45063c,900,2)
[2015-11-25 12:16:03] WARNING[15180] pbx.c: Channel ‘SIP/121-00000d13’ sent into invalid extension ‘900’ in context ‘restrictedroute-83f1807ba6c14eef109c67d41a45063c’, but no invalid handler
[2015-11-25 12:16:03] VERBOSE[15180] pbx.c: – Executing [h@restrictedroute-83f1807ba6c14eef109c67d41a45063c:1] Hangup(“SIP/121-00000d13”, “”) in new stack

I guess you missed this part

But that is the number of the page group - 900. Not sure how it can be invalid.

I had read in a post years ago that the extension routing module can cause issues, so I disabled it. Now when I dial the page group number, the system says - your call can not be completed as dialed

This is what the log files say now:

[2015-11-25 12:59:36] VERBOSE[29312] pbx.c: – Goto (from-internal-original,400,1)
[2015-11-25 12:59:36] VERBOSE[24034] chan_sip.c: == Extension Changed 121[ext-local] new state InUse for Notify User 125
[2015-11-25 12:59:36] VERBOSE[29312] pbx.c: – Executing [400@from-internal-original:1] ResetCDR(“SIP/121-00000d27”, “”) in new stack
[2015-11-25 12:59:36] VERBOSE[29312] pbx.c: – Executing [400@from-internal-original:2] NoCDR(“SIP/121-00000d27”, “”) in new stack
[2015-11-25 12:59:36] VERBOSE[29312] pbx.c: – Executing [400@from-internal-original:3] Progress(“SIP/121-00000d27”, “”) in new stack
[2015-11-25 12:59:36] VERBOSE[29312] pbx.c: – Executing [400@from-internal-original:4] Wait(“SIP/121-00000d27”, “1”) in new stack
[2015-11-25 12:59:37] VERBOSE[29312] pbx.c: – Executing [400@from-internal-original:5] Progress(“SIP/121-00000d27”, “”) in new stack
[2015-11-25 12:59:37] VERBOSE[29312] pbx.c: – Executing [400@from-internal-original:6] Playback(“SIP/121-00000d27”, “silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer”) in new stack
[2015-11-25 12:59:37] VERBOSE[29312] file.c: – <SIP/121-00000d27> Playing ‘silence/1.ulaw’ (language ‘en’)
[2015-11-25 12:59:38] VERBOSE[29312] file.c: – <SIP/121-00000d27> Playing ‘cannot-complete-as-dialed.ulaw’ (language ‘en’)