Hi,
My Problem is, that incoming calls from the Unix-PBX are routed wrong.
They come in on External Trunc with dialed numer “28650” and Freepbx makes a “2128650” out of it and reroutes it to external Trunc again:
[2015-04-29 13:19:08] VERBOSE[41810][C-000000c8] pbx.c: – Executing [tdial@ext-trunk:9] Dial(“SIP/topbx2-0000014f”, “SIP/to_lync/28650,300,Tt”) in new stack
[2015-04-29 13:19:08] VERBOSE[41810][C-000000c8] netsock2.c: == Using SIP RTP TOS bits 184
[2015-04-29 13:19:08] VERBOSE[41810][C-000000c8] netsock2.c: == Using SIP RTP CoS mark 5
[2015-04-29 13:19:08] VERBOSE[41810][C-000000c8] app_dial.c: – Called SIP/to_lync/28650
[2015-04-29 13:19:09] VERBOSE[41810][C-000000c8] app_dial.c: – SIP/to_lync-00000150 is ringing
[2015-04-29 13:19:09] VERBOSE[41815][C-000000c9] netsock2.c: == Using SIP RTP TOS bits 184
[2015-04-29 13:19:09] VERBOSE[41815][C-000000c9] netsock2.c: == Using SIP RTP CoS mark 5
[2015-04-29 13:19:09] VERBOSE[41816][C-000000c9] pbx.c: – Executing [2128650@from-internal:1] Macro(“SIP/to_lync-00000151”, “user-callerid,LIMIT,EXTERNAL,”) in new stack
What I Need it that the external incoming numer “28650” goes out on internal “650”.
Can anybody help?
Thx in advance!