I am using Freepbx Distro of 32 bit.
when I type asterik -rvvvv It display the following during incoming call to asterisk server.
Starting simple switch on ‘DAHDI/1-1’
– Executing [s@from-analog:1] Macro(“DAHDI/1-1”, “hangupcall,”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“DAHDI/1-1”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [s@macro-hangupcall:3] ExecIf(“DAHDI/1-1”, “0?Set(CDR(recordingfile)=)”) in new stack
– Executing [s@macro-hangupcall:4] Hangup(“DAHDI/1-1”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘DAHDI/1-1’ in macro ‘hangupcall’
== Spawn extension (from-analog, s, 1) exited non-zero on ‘DAHDI/1-1’
– Executing [h@from-analog:1] Macro(“DAHDI/1-1”, “hangupcall,”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“DAHDI/1-1”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [s@macro-hangupcall:3] ExecIf(“DAHDI/1-1”, “0?Set(CDR(recordingfile)=)”) in new stack
– Executing [s@macro-hangupcall:4] Hangup(“DAHDI/1-1”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘DAHDI/1-1’ in macro ‘hangupcall’
== Spawn extension (from-analog, h, 1) exited non-zero on ‘DAHDI/1-1’
– Hanging up on ‘DAHDI/1-1’
– Hungup ‘DAHDI/1-1’
&it repeates it again and again
Secondly when I type asterisk -rvvvvvvvvvvvv
During the First call it display the following
– Starting simple switch on ‘DAHDI/1-1’
> [INSERT INTO cel (eventtype,eventtime,cid_name,cid_num,cid_ani,cid_rdnis,cid_dnid,exten,context,channame,appname,appdata,amaflags,accountcode,uniqueid,linkedid,peer,userdeftype,userfield) VALUES (‘CHAN_START’,{ts ‘2014-11-27 14:14:58’},’’,’’,’’,’’,’’,‘s’,‘from-analog’,‘DAHDI/1-1’,’’,’’,3,’’,‘1417086898.11’,‘1417086898.11’,’’,’’,’’)]
– Executing [s@from-analog:1] Macro(“DAHDI/1-1”, “hangupcall,”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“DAHDI/1-1”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [s@macro-hangupcall:3] ExecIf(“DAHDI/1-1”, “0?Set(CDR(recordingfile)=)”) in new stack
– Executing [s@macro-hangupcall:4] Hangup(“DAHDI/1-1”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘DAHDI/1-1’ in macro ‘hangupcall’
== Spawn extension (from-analog, s, 1) exited non-zero on ‘DAHDI/1-1’
– Executing [h@from-analog:1] Macro(“DAHDI/1-1”, “hangupcall,”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“DAHDI/1-1”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,3)
– Executing [s@macro-hangupcall:3] ExecIf(“DAHDI/1-1”, “0?Set(CDR(recordingfile)=)”) in new stack
– Executing [s@macro-hangupcall:4] Hangup(“DAHDI/1-1”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘DAHDI/1-1’ in macro ‘hangupcall’
== Spawn extension (from-analog, h, 1) exited non-zero on ‘DAHDI/1-1’
– Hanging up on ‘DAHDI/1-1’
– Hungup ‘DAHDI/1-1’
> [INSERT INTO cel (eventtype,eventtime,cid_name,cid_num,cid_ani,cid_rdnis,cid_dnid,exten,context,channame,appname,appdata,amaflags,accountcode,uniqueid,linkedid,peer,userdeftype,userfield) VALUES (‘HANGUP’,{ts ‘2014-11-27 14:15:08’},’’,’’,’’,’’,’’,‘h’,‘from-analog’,‘DAHDI/1-1’,’’,’’,3,’’,‘1417086898.11’,‘1417086898.11’,’’,’’,’’)]
> [INSERT INTO cel (eventtype,eventtime,cid_name,cid_num,cid_ani,cid_rdnis,cid_dnid,exten,context,channame,appname,appdata,amaflags,accountcode,uniqueid,linkedid,peer,userdeftype,userfield) VALUES (‘CHAN_END’,{ts ‘2014-11-27 14:15:08’},’’,’’,’’,’’,’’,‘h’,‘from-analog’,‘DAHDI/1-1’,’’,’’,3,’’,‘1417086898.11’,‘1417086898.11’,’’,’’,’’)]
> [INSERT INTO cel (eventtype,eventtime,cid_name,cid_num,cid_ani,cid_rdnis,cid_dnid,exten,context,channame,appname,appdata,amaflags,accountcode,uniqueid,linkedid,peer,userdeftype,userfield) VALUES (‘LINKEDID_END’,{ts ‘2014-11-27 14:15:08’},’’,’’,’’,’’,’’,‘h’,‘from-analog’,‘DAHDI/1-1’,’’,’’,3,’’,‘1417086898.11’,‘1417086898.11’,’’,’’,’’)]
by what way i can answer an incoming call?
Thanks.