Using the Distro “FreePBX-64bit-10.03.66.iso”, I have completed a totally new install and although the system went in with no errors or indicators, the DAHDi configuration page has no info and also has the red block reading “DAHDi Doesn’t appear to be running. Click the ‘Restart/Reload Dahdi Button’ Below”.
The system sees the card:
###################################################################
SUMMARY
###################################################################
2 T1/E1 port(s) detected, 2 configured
0 ISDN BRI port(s) detected, 0 configured
1 analog card(s) detected, 1 configured
0 GSM card(s) detected, 0 configured
0 usb device(s) detected, 0 configured
Configurator will create the following files:
1. Wanpipe config files in /etc/wanpipe
2. Dahdi config file /etc/dahdi/system.conf
3. chan_dahdi config file /etc/asterisk/dahdi-channels.conf
=======
I am unsure if you need more information… but I can get nearly anything you ask for…
but I am also unsure of what to do next…
short of blowing it away and going back a level…