Marbled
December 29, 2017, 2:58pm
5
Hi!
Please take a look at this thread:
Running FreePBX 13.0.192.16 and Asterisk 13.17.0
Recently used the “warm spare” method to move to a new server (new VM on KVM/proxmox)
The server has about 120 remote extension, and had no real problems before.
I posted about this crash issue yesterday here, but my hypothesis was off: Media_index.c: Failed to stat
Today we had a ton of users call and say their phones weren’t working. Funny thing is, they show OK with IP address in peers list when running “sip show peers” in cli.
So we did a…
You are getting FRACK errors…
As Andrew said in this thread
Generally something to consider about frack errors is that freepbx can’t cause them as it’s a memory issue with asterisk and the system. So they should always be reported to asterisk.
they should be reported to Asterisk.
That said, did you update your packages? You are not running the latest Asterisk 13 and the one you are running, 13.17 is known have problems according to dicko’s post:
Again , there IS an acknowledged problem by Digium with 13.17 , just don’t use it and you won’t have to chase rabbits down the wrong hole.
Good luck and have a nice day!
Nick