dudedude () — 2013-02-01T05:55:24-05:00 — #1
Could anyone shed some light on how I tell our SPA504Gs to use a different ring tone, there doesnt seem to be much on line about it.
cookdn () — 2013-02-13T12:15:02-05:00 — #2
You want the Alert-Info field on inbound routes/queues etc. You can then set the built-in ringtones on Linksys/Cisco SPAs using the string:
where "Simple-1" is the ringtone name. The available list is accessible on the handset through ringtones menu option. If you want a different default (where you are not using the Alert-Info SIP header) you need to set that either manually on the handset or through the following element in the XML config deployed to the handset:
where 10 is the index number of the ring-tone in the list.
There is a method to upload custom ring-tones to the SPA handsets it has two problems. Firstly it is not something easily automated as it is completely separate to the XML provisioning and uses a small desktop application. Secondly you cannot access the ring-tones by manipulating the SIP header, you need to set-up a directory entry on the handset and then assign the custom ring-tone to it.
(This is our experience of SPA942s and SPA504s on current firmware).
bgroper () — 2013-02-14T05:31:05-05:00 — #3
SPA504G web interface
Voice, Regional, Distinctive Ring Patterns
Set your cadence pattern/s as desired.
system (system) — 2014-06-04T15:49:28-04:00 — #4
This topic is now closed. New replies are no longer allowed.