BT GSM Gateway - mobile search in cli : no such command

Hi all.

I’m using Freepbx 13.0.189 / asterisk 13.11.2.
I would like to set up a GSM gateway using a Bluetooth adapter.
After pairing, I need to launch the command in Cli “mobile search” but I get a “No such command”.

Module chan_mobile.so is manually loaded from the Module admin interface.

Any help would be appreciated.

Hi AroundThePC!

If you try module load chan_mobile.so before issuing mobile search, does it work?

If it does, there is a problem with your module loading…

Good luck and have a nice day!

Nick

Hi !
I found the way…
I was working on chan_mobile.conf stored in /usr/share/asterisk/configs/ and not in /etc/asterisk/
I put a copy of chan_mobile.conf in /etc/asterisk/ followed by a “fwconsole restart”

(see the way from this thread chan_mobile [WORKING well with iPhone 4s])

Then I was able to send the command “mobile search” in the CLI interface !

Thank you for replying !

For your information : It works fine with Nexus 6 (shamu)

Cheers,
Laurent.