So I’m following the instructions here:
But the dial patterns all start with 1. The service I’m using allows dialing without a 1 prefix. I could duplicate all the number in this list without a 1. But is there a pattern to match numbers both with and without a 1?
Well this:
https://wiki.freepbx.org/display/FPG/DIAL+PATTERN+INFO
Says I need to enter two patterns, one with and one without the 1.
You might want to ‘normalize’ the inbound callerid(number) by using the
from-pstn-e264-us
Context in extensions.conf for your trunk.
Hi!
For more information on from-pstn-e164-us please refer to
Have a nice day!
Nick
Thanks for the reply Nick and Dicko. But I’m confused by your answers. This is not an inbound issue. I’m talking about outbound dial rules. The link I provided talks about creating a dummy trunk and then putting an outbound path pointing to it with all the numbers you want blocked.
Now the second link says that I cannot put 1/no-1 in a single pattern. So I’ve copied the numbers provided and edited out the 1. My problem seems to be solved.
Kirk, you are right, I misread…
What you did sounds perfectly fine…
Have a nice day!
Nick